aboutsummaryrefslogtreecommitdiff
path: root/toys
AgeCommit message (Collapse)Author
2019-08-09losetup: fix the race.Elliott Hughes
There's a race between LOOP_CTL_GET_FREE and LOOP_SET_FD. Work around it by just retrying if we get EBUSY on the LOOP_SET_FD call. This is what similar code in ChromeOS already does. Bug: http://b/135716654
2019-08-09Split out run_function() and free_function(), add start of _TOYSH_LOCALSRob Landley
marshalling for vforked subshells, fix rc returned from run_pipeline for variable assignment. (Well, sort of: X=$(false) still needs rc = 1.)
2019-08-04Make "if true; then echo hello; fi" work. More work on redirection.Rob Landley
2019-08-04Add TOYFLAG_MAYFORK and annotate a couple commands.Rob Landley
A TOYFLAG_NOFORK command must run in the context of toysh, but a MAYFORK can either run standalone or run in the toysh process. MAYFORK means it cleans up after itself: no leaked resources (malloc, mmap, filehandles, etc), even in error_exit() paths that would longjmp() back to the shell. It also doesn't discard anything we need to retain (don't close stdout, change toys.optargs[] so we can't free it, etc)...
2019-08-03Fix a bug report from E5ten: stat of a file with suid or sticky bit setRob Landley
output 5 digits of octal stat data instead of 4, due to hardwired leading 0 instead of %04a sprintf prefix.
2019-08-02Next round of infrastructure. Start of redirect logic and runtime flow control.Rob Landley
2019-07-31Move the empty regex workaround into xregcomp.Elliott Hughes
No current caller except grep needs this, but consistency seems like a good idea. Also change the xregcomp error message to be a bit more human-readable, rather than mention an implementation detail.
2019-07-31man: switch to xregcomp.Elliott Hughes
All regcomp callers are now going through xregcomp.
2019-07-30Fix signed typecast bug.Rob Landley
We use (char *)1 and (char *)2 to indicate errors (they can never be valid pointers because both malloc() and mmap() return aligned memory and those align down to NULL, plus Linux maps 4k at the bottom to catch null dereferences anyway), and then typecast it to long (trusting in LP64) to do an integer <=2 comparison... except that needs to be UNSIGNED long or else pointers in the top half of the virtual memory space become negative and the <=2 false positives them as errors. (Oops.)
2019-07-29grep: fake GNU behavior for non-POSIX empty regex.Elliott Hughes
POSIX says there's no such thing as an empty regular expression. The grammar excludes the possibility: https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html BSD agrees with POSIX, and Android and macOS' BSD-based implementations reject the empty regular expression. GNU apparently disagrees. Luckily, BSD does accept the empty *sub* expression `()`, despite their error message for REG_EMPTY being "empty (sub)expression". This is presumably a bug, except there's explicit code to support it that is at least 26 years old: https://github.com/freebsd/freebsd/blame/master/lib/libc/regex/regcomp.c#L383 This workaround also works fine with glibc. If we want GNU behavior, I'm struggling to come up with another way to fake it. If we want POSIX behavior, we could easily just add a check to reject "" on glibc. Also switch to xregcomp().
2019-07-25killall: implement -w.Elliott Hughes
This isn't currently used in AOSP, but it is used in some of the other codebases I can easily search, and it's a better fix for test flakiness than inserting a sleep.
2019-07-24crontab: switch to getline().Elliott Hughes
2019-07-24Rewrite tac to make better use of lib functions.Rob Landley
2019-07-24tac: switch to getline().Elliott Hughes
2019-07-23nl: switch from getline() to loopfiles_lines().Elliott Hughes
This was basically just to help me think out loud while discussing loopfiles_lines().
2019-07-22Start replacing get_line() with getline().Elliott Hughes
I started this last night, but thought I'd aim to send multiple small patches rather than work through all the callers and send one big patch. I've deliberately chosen the ugly name `allocated_length` because we've had historical bugs where folks think this a line length in the sense of the return value. I do wonder whether we should actually have some kind of getline() wrapper that hides the `char *`/`size_t` pair in lib/, which makes the function easier to use in most cases but does add the less common gotcha that you wouldn't be able to getline() through multiple files at once (which does happen in at least one toy). But maybe the real fix is to look harder for places where we can just use loopfiles_lines? Speaking of which, should we actually add two more arguments to that? Specifically: switch it to getdelim() rather than getline() behind the scenes, and also add a way to have the trailing '\n' automatically removed, since that seems to be what most callers want? Anyway, that seemed like enough questions that it was time to send this initial patch out before doing too much more...
2019-07-22Next round of plumbing evolution. Left in the todo and debug code this time.Rob Landley
2019-07-19xargs: don't pretend to support -I.Elliott Hughes
This was embarrassing... A build script that was using xargs -I silently started to ignore -I when we switched over to toybox xargs. The owner of the script has rewritten it to use the shell read builtin instead, but it's pretty unhelpful to silently ignore an option that radically changes how xargs behaves. (The -I behavior sounds sufficiently different from normal behavior that I'm not sure I've understood, and am just sending this cleanup rather than actually implementing -I correctly.) Bug: http://b/137832162
2019-07-17ifconfig: fix for non-root on Android.Elliott Hughes
The change from ioctl to xioctl in 844f0d1aae28c54bbb672f53ba2cda182c572129 broke ifconfig for non-root on Android. SIOCGIFHWADDR has been protected to prevent device tracking since Nougat. Bug: https://issuetracker.google.com/137671590
2019-07-16Fix unaligned access, tweak test suite.Rob Landley
2019-07-16grep: fix two bugs found by hwasan.Elliott Hughes
The first bug appeared as a memory overwrite, but was actually visible without hwasan: basically any `grep -F` that let to multiple matches on the same line was broken. The second bug was another memory overwrite, visible when I ran the existing grep tests. Bug: http://b/137573082
2019-07-16ip.c route change support for extended attributes.Mike Bennett
This fixes the extended attribute settings for the ip route change command; extended attributes are collected in a separate buffer and added to the RTM message in a specific RTA_METRICS attribute. Only added setter support for the RTAX_MTU (per-route MTU), as that was the only option currently parsed. Also added support for displaying extended attributes, even those not currently settable.
2019-07-12diff: implement --strip-trailing-cr.Elliott Hughes
Used by some ART tests and also some LLVM tests. (The motivating example is the latter, but I noticed the former when looking for other users.) Bug: http://b/137298656
2019-07-12pidof: fix default behavior, add -x.Elliott Hughes
Before this patch, we're effectively doing `pidof -x` all the time. This patch changes names_to_pid() to allow us to say whether or not we want to include scripts, and adjusts the callers appropriately. Also add tests for `pidof` versus `pidof -x` which pass after this patch, without regressing the existing killall tests.
2019-07-12grep: add -R as well as -r.Elliott Hughes
On BSD these are actually the same, and there's a -S that you need in addition. So strictly this is a behavior change for Android (which is going from BSD grep to toybox grep), but it's a behavior preserving change for the AOSP build (which is going from GNU grep to toybox grep), and the latter actually has a checked-in use of -R where the former doesn't.
2019-07-11Next sh checkpoint. Not remotely load bearing yet.Rob Landley
2019-07-11bind/connect cleanup.Elliott Hughes
Rename the existing xbind/xconnect to xbindany/xconnectany, to make room for new xbind/xconnect that are more like 'x' versions of the regular bind and connect. Move explicit bind/connect callers over to xbind/xconnect. Of the affected commands, only netcat is actually used by Android. It was the most recent patch to netcat that made the lack of a more traditional xbind/xconnect apparent.
2019-07-11xargs: bug compatibility with BSD/busybox/findutils.Elliott Hughes
The other xargs implementations in the wild don't seem to count the space taken by each `char *`. Go for bug compatibility unless future experience proves that to be a bad idea.
2019-07-10dd: iflags, oflags, fix ^C, fix the fundamental loop.Elliott Hughes
Investigating why the toybox tar tests fail on Android with toybox dd, I realized I was rewriting a part of dd I'd rewritten before! This is a re-send of my 2019-02-22 patch, rebased against the current ToT... This patch was originally motivated because after suggesting to the author of https://stackoverflow.com/questions/17157820/access-vdsolinux/54797221#54797221 that he could tell dd to work in bytes rather than blocks, I realized that our dd doesn't actually support that. But the rewrite of the main loop is necessary to fix the incorrect output from the dd calls in the tar test. Without this patch, `yes | dd bs=65536 count=1 > fweep` basically gives random output, based on how many bytes the pipe feels like giving you in your first read. (As far as I know, dd *without* bs= was fine, but I can't guarantee that that's true, just that I haven't seen it fail.) Also switch to TAGGED_ARRAY and comma_* for conv rather than add two more copies of an undesired idiom. It turned out -- contrary to the belief of cp(1) -- that comma_scan isn't suitable for this because of its magic handling of "no" prefixes. (It's actually harmless in cp because none of the --preserve options begin with "no", but some dd options do.) To this end, comma_remove is a less-magic comma_scan. I've also changed an `if` to a `while` because other implementations allow things like `--preserve=mode,mode` or `conv=sync,sync`. (If we decide this is a bug rather than a feature, we should at least fix the error message to be clear that we're rejecting the *duplication*, not the option itself.) I've also fixed the ^C behavior by simply adding a direct SIGINT handler rather than trying to be clever inside the read loop (which is why we weren't handling the SIGINT until the read returned). I've also removed `strstarteq` and just added the '=' to each literal when calling regular `strstart`. Plus basic tests.
2019-07-09dd: fix seek= on stdout.Elliott Hughes
2019-07-06file: fix xz, add a few other Android types.Elliott Hughes
"xz compressed data" was missing a newline. Also switch a couple of other unnecessary (but correct) xprintf calls over to xputs. Also add .otf fonts, perf/simpleperf data files, and Android boot images, sparse images, and device tree blobs/overlays.
2019-07-06killall: better handling of long names.Elliott Hughes
Change names_to_pid() so that we can actually match shell scripts with long names (the code to get the shell script's name was correct, but there was an extra test preventing us from actually comparing it to the sought name). In kill.c itself, remove a dead test for -l and switch to the FLAG() macro. Also extend the tests to explicitly cover long and short names.
2019-07-06Add comment and test.Rob Landley
2019-07-06Have env exec, not recurse to builtin.Denys Nykula
My app runs npm i -S better-sqlite3, and node-gyp-bin from the npm upstream has #!/usr/bin/env sh, expecting the system shell.
2019-07-03nl: nl -vEric Molitor
Implement nl -v supporting negative and zero starting values.
2019-07-01netcat: Add UNIX domain socket support (-U)Tom Cherry
Other implementations of netcat support UNIX domain sockets via -U, so this change adds it to toybox too. Example usage: Create ./uds as a UNIX domain socket and listen on it, forwarding messages to bash: > nc -U -s ./uds -L /bin/bash Connect to ./uds as a UNIX domain socket > nc -U ./uds
2019-06-29More toysh flow control plumbing.Rob Landley
2019-06-28modinfo: various small fixes.Elliott Hughes
Improve Android support (see code comments). Remove unnecessary fixed-length limits. Show error if module not found (plus test). Expand help text. Switch to FLAG macro. Stop hard-coding module assumptions in the tests.
2019-06-28file, stat: various small improvements.Elliott Hughes
file now shows the target of a symbolic link and calls out broken symbolic links. file now shows the device type for block/character special files. file now shows specific reason when it can't open. stat now includes the device type, plus a little more space between the number of blocks and the human-readable file type. Adjusted tests accordingly, which actually makes more of them pass on the host as a convenient side-effect, but I actually made these changes because I've been finding the desktop file and stat output more convenient in these cases.
2019-06-26losetup: fix Android.Elliott Hughes
Use /dev/block/loop* more uniformly, and teach the tests which to expect.
2019-06-25Start over on toysh.Rob Landley
Basic line continuation logic (to prompt with $PS2). Doesn't use result yet.
2019-06-25losetup: minor fixes.Elliott Hughes
Fix `losetup -f` to not fail with an error. Add the missing \n for `losetup -f --show FILE`. Use decimal for the device number, like the desktop losetup. Switch to the FLAG macro. Make the tests runnable as tests, and expand coverage a bit. With this patch, the tests pass both with and without TEST_HOST on the desktop. Note though that this patch is part of fixing some real-life losetup issues, not part of the "test cleanup" I'm also looking at. losetup is low down that list!
2019-06-25tar: implement --mode.Elliott Hughes
Used by build/make/tools/mktarball.sh in AOSP. (Which is why today's switch to toybox tar got reverted.)
2019-06-24diff: fix diff of stdin for systems without /tmp.Elliott Hughes
xtempfile() alreay does the right thing, so switch to that. Also use xsendfile() for the actual copying. Fixes the cat tests on Android.
2019-06-23Switch cp.c to FLAG() macros.Rob Landley
2019-06-22Use FORCE_FLAGS in kill.c.Elliott Hughes
Otherwise kill flags don't work unless killall5 is also configured. Also switch to the FLAG() macro.
2019-06-22Fix mv with trailing slash in source.Denys Nykula
Press tab, have bash complete dir name with a slash, notice musl rename() dislikes that. Replace trailing slash in the cp loop with a null character, if the command name is mv. Add the slash back if an error occurs.
2019-06-21bc: fix a few bugs found in upstreamGavin Howard
2019-06-21Fix cp -r dir/. symlink child.makepost
Remove the existing link before trying to re-create, passing the test. Add -p to the -r test as a regression guard, portage calls cp with both.
2019-06-19Avoid a double-definition (iphdr) from netinet/in.h and linux/ip_tunnel.h by ↵Mike Bennett
locally defining the single constant definition ip.c uses (IP_DF) if not already defined.