| Age | Commit message (Collapse) | Author |
|---|
|
Before this patch, we're effectively doing `pidof -x` all the time. This
patch changes names_to_pid() to allow us to say whether or not we want to
include scripts, and adjusts the callers appropriately.
Also add tests for `pidof` versus `pidof -x` which pass after this
patch, without regressing the existing killall tests.
|
|
On BSD these are actually the same, and there's a -S that you need in
addition. So strictly this is a behavior change for Android (which is
going from BSD grep to toybox grep), but it's a behavior preserving
change for the AOSP build (which is going from GNU grep to toybox grep),
and the latter actually has a checked-in use of -R where the former
doesn't.
|
|
|
|
Rename the existing xbind/xconnect to xbindany/xconnectany, to make room
for new xbind/xconnect that are more like 'x' versions of the regular
bind and connect. Move explicit bind/connect callers over to
xbind/xconnect.
Of the affected commands, only netcat is actually used by Android. It
was the most recent patch to netcat that made the lack of a more
traditional xbind/xconnect apparent.
|
|
The other xargs implementations in the wild don't seem to count the
space taken by each `char *`. Go for bug compatibility unless future
experience proves that to be a bad idea.
|
|
Investigating why the toybox tar tests fail on Android with toybox dd, I
realized I was rewriting a part of dd I'd rewritten before!
This is a re-send of my 2019-02-22 patch, rebased against the current
ToT...
This patch was originally motivated because after suggesting to the author of
https://stackoverflow.com/questions/17157820/access-vdsolinux/54797221#54797221
that he could tell dd to work in bytes rather than blocks, I realized
that our dd doesn't actually support that. But the rewrite of the main
loop is necessary to fix the incorrect output from the dd calls in the
tar test.
Without this patch, `yes | dd bs=65536 count=1 > fweep` basically gives
random output, based on how many bytes the pipe feels like giving you in
your first read. (As far as I know, dd *without* bs= was fine, but I
can't guarantee that that's true, just that I haven't seen it fail.)
Also switch to TAGGED_ARRAY and comma_* for conv rather than add two more
copies of an undesired idiom. It turned out -- contrary to the belief of
cp(1) -- that comma_scan isn't suitable for this because of its magic
handling of "no" prefixes. (It's actually harmless in cp because none
of the --preserve options begin with "no", but some dd options do.) To
this end, comma_remove is a less-magic comma_scan.
I've also changed an `if` to a `while` because other implementations
allow things like `--preserve=mode,mode` or `conv=sync,sync`. (If we
decide this is a bug rather than a feature, we should at least fix the
error message to be clear that we're rejecting the *duplication*, not
the option itself.)
I've also fixed the ^C behavior by simply adding a direct SIGINT handler
rather than trying to be clever inside the read loop (which is why we
weren't handling the SIGINT until the read returned).
I've also removed `strstarteq` and just added the '=' to each literal
when calling regular `strstart`.
Plus basic tests.
|
|
|
|
"xz compressed data" was missing a newline. Also switch a couple of
other unnecessary (but correct) xprintf calls over to xputs.
Also add .otf fonts, perf/simpleperf data files, and Android boot
images, sparse images, and device tree blobs/overlays.
|
|
Change names_to_pid() so that we can actually match shell scripts with
long names (the code to get the shell script's name was correct, but
there was an extra test preventing us from actually comparing it to the
sought name).
In kill.c itself, remove a dead test for -l and switch to the FLAG()
macro.
Also extend the tests to explicitly cover long and short names.
|
|
|
|
My app runs npm i -S better-sqlite3, and node-gyp-bin from the npm
upstream has #!/usr/bin/env sh, expecting the system shell.
|
|
Implement nl -v supporting negative and zero starting values.
|
|
Other implementations of netcat support UNIX domain sockets via -U, so
this change adds it to toybox too.
Example usage:
Create ./uds as a UNIX domain socket and listen on it, forwarding
messages to bash:
> nc -U -s ./uds -L /bin/bash
Connect to ./uds as a UNIX domain socket
> nc -U ./uds
|
|
|
|
Improve Android support (see code comments).
Remove unnecessary fixed-length limits.
Show error if module not found (plus test).
Expand help text.
Switch to FLAG macro.
Stop hard-coding module assumptions in the tests.
|
|
file now shows the target of a symbolic link and calls out broken
symbolic links.
file now shows the device type for block/character special files.
file now shows specific reason when it can't open.
stat now includes the device type, plus a little more space between the
number of blocks and the human-readable file type.
Adjusted tests accordingly, which actually makes more of them pass on
the host as a convenient side-effect, but I actually made these changes
because I've been finding the desktop file and stat output more convenient
in these cases.
|
|
Use /dev/block/loop* more uniformly, and teach the tests which to expect.
|
|
Basic line continuation logic (to prompt with $PS2). Doesn't use result yet.
|
|
Fix `losetup -f` to not fail with an error.
Add the missing \n for `losetup -f --show FILE`.
Use decimal for the device number, like the desktop losetup.
Switch to the FLAG macro.
Make the tests runnable as tests, and expand coverage a bit. With this
patch, the tests pass both with and without TEST_HOST on the desktop.
Note though that this patch is part of fixing some real-life losetup
issues, not part of the "test cleanup" I'm also looking at. losetup is
low down that list!
|
|
Used by build/make/tools/mktarball.sh in AOSP. (Which is why today's
switch to toybox tar got reverted.)
|
|
xtempfile() alreay does the right thing, so switch to that.
Also use xsendfile() for the actual copying.
Fixes the cat tests on Android.
|
|
|
|
Otherwise kill flags don't work unless killall5 is also configured.
Also switch to the FLAG() macro.
|
|
Press tab, have bash complete dir name with a slash, notice musl
rename() dislikes that. Replace trailing slash in the cp loop with a
null character, if the command name is mv. Add the slash back if an
error occurs.
|
|
|
|
Remove the existing link before trying to re-create, passing the test.
Add -p to the -r test as a regression guard, portage calls cp with both.
|
|
locally defining the single constant definition ip.c uses (IP_DF) if not already defined.
|
|
I put the check into the wrong if. That was my bad. Again.
|
|
This bug is that an error should be returned when the user tries to take
0 to a negative power, since that is undefined, but bc would return 0.
|
|
Used near the end of the AOSP build. Almost there!
(This patch also fiddles with the help text to be able to slip the new
options in without requiring so much extra space.)
|
|
Include all the signals, not just the POSIX ones.
In particular, improve support for real-time signals. My attempt to
switch AOSP builds over to toybox timeout got reverted when I broke the
ART build bots which use SIGRTMIN+2.
Also fix `kill -l 3` to show "QUIT" and `kill -l QUIT` to show "3".
Also make the `kill -l` output include numbers and names, and format it
to look better on a 80x24 tty, because it's always August 1978 somewhere.
|
|
This patch adds a BSD version of xgetmountlist (for the path ==
NULL case only), tested on macOS. It also papers over the differences
between macOS' and Linux's xattr APIs. For once I think the macOS
one is better. The imitation of mknodat I've had to write swings
things back in Linux's favor though.
BSD calls f_frsize by the name f_iosize instead. (FWIW, it looks
like this is meaningless on Linux and actually meaningful on macOS.)
I've added one #if to toys/ --- I'm calling pathconf in stat.c to
work around the absence of f_namelen, and have left a TODO with an
explanation. I'm not sure what the best fix is here, so punting.
No-one can agree what f_fsid is, even if they're all basically the
same, so work around the `val` versus `__val` issue between macOS
and Linux.
With this patch, it's now possible to build cp/mv/install and stat
for macOS too. (Which completes the set of "toybox commands currently
used on Linux as part of the AOSP build" if you ignore stuff that
deals with processes, which I doubt we'll ever be able to support
for lack of any API.)
|
|
These are Android specific, so not really helping the outside
community, and are getting more and more Android dependencies to work
correctly, so let's drop these from toybox and build them within
Android.
Change-Id: Ic6022f1f506e10868c61f55d64fa4e7c1b14eba2
|
|
We'd documented find %Z but not implemented it. We'd neither documented
nor implemented stat's corresponding %C (they'd already taken %Z for
ctime, which is ironic because %c/%C sounds more obvious than %z/%Z for
that to me).
|
|
Yeah, it's twice the size and two codepaths, but seekable is the common
case, it won't work in pipelines without a non-seek codepath, and the
performance penalty not using seek on large files is a enormous.
|
|
|
|
|
|
|
|
|
|
This only implements the format specifiers that I've seen used in the
wild (which is actually a significant fraction of the total supported by
findutils' find). The most obvious gap is in the time support. I'm happy
to add more, but didn't want to add stuff "just because".
I'd say %A@, %C@, and -- for SELinux users -- %Z are probably the most
plausibly useful formats still missing. I don't think the human-readable
date formatting is particularly useful unless someone's seen it actually
used in the wild. The %T+ "full ISO" format being the most likely
exception to that.
Anyway, this is enough for me get started building AOSP with toybox find.
|
|
Used quite a lot, especially with `--exclude-dir=.git`.
|
|
Copy-and-paste mistake from the regular output.
Bug: http://b/133502489
|
|
into a structure passed as arguments, add x prefix to functions that can fail,
add overflow test.
|
|
Factor out the inotify code and add a kqueue equivalent.
Specifically tested on macOS 10.14, but I assume this works for other
BSDs too, given that I worked from the FreeBSD man page...
|
|
out of scope), but the AOSP build airlock doesn't provide bzcat and friends.
So tar needs to be able to use both: check for *zcat first, and fall back to
"compressor -d" if it's not there.
|
|
Found trying to build the aosp_cf_x86_phone-userdebug target. The good
news is that the targets that I knew were using tar with sparse files
all pass now.
|
|
|
|
|
|
|
|
There's no possible use for this, but debian's tar produces it, so...
|
