From e2abcdca396661cbe0ae2ddb13d5c2b85682c13a Mon Sep 17 00:00:00 2001 From: Cem Keylan Date: Fri, 16 Oct 2020 17:41:25 +0300 Subject: initial commit --- sys/sys/protosw.h | 237 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 237 insertions(+) create mode 100644 sys/sys/protosw.h (limited to 'sys/sys/protosw.h') diff --git a/sys/sys/protosw.h b/sys/sys/protosw.h new file mode 100644 index 0000000..995a038 --- /dev/null +++ b/sys/sys/protosw.h @@ -0,0 +1,237 @@ +/* $OpenBSD: protosw.h,v 1.31 2018/01/23 20:49:58 bluhm Exp $ */ +/* $NetBSD: protosw.h,v 1.10 1996/04/09 20:55:32 cgd Exp $ */ + +/*- + * Copyright (c) 1982, 1986, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)protosw.h 8.1 (Berkeley) 6/2/93 + */ + +/* + * Protocol switch table. + * + * Each protocol has a handle initializing one of these structures, + * which is used for protocol-protocol and system-protocol communication. + * + * A protocol is called through the pr_init entry before any other. + * Thereafter it is called every 200ms through the pr_fasttimo entry and + * every 500ms through the pr_slowtimo for timer based actions. + * + * Protocols pass data between themselves as chains of mbufs using + * the pr_input and pr_output hooks. Pr_input passes data up (towards + * UNIX) and pr_output passes it down (towards the imps); control + * information passes up and down on pr_ctlinput and pr_ctloutput. + * The protocol is responsible for the space occupied by any the + * arguments to these entries and must dispose it. + * + * The userreq routine interfaces protocols to the system and is + * described below. + */ + +struct mbuf; +struct sockaddr; +struct socket; +struct domain; +struct proc; + +struct protosw { + short pr_type; /* socket type used for */ + struct domain *pr_domain; /* domain protocol a member of */ + short pr_protocol; /* protocol number */ + short pr_flags; /* see below */ + +/* protocol-protocol hooks */ + /* input to protocol (from below) */ + int (*pr_input)(struct mbuf **, int *, int, int); + /* output to protocol (from above) */ + int (*pr_output)(struct mbuf *, struct socket *, struct sockaddr *, + struct mbuf *); + /* control input (from below) */ + void (*pr_ctlinput)(int, struct sockaddr *, u_int, void *); + /* control output (from above) */ + int (*pr_ctloutput)(int, struct socket *, int, int, struct mbuf *); + +/* user-protocol hook */ + /* user request: see list below */ + int (*pr_usrreq)(struct socket *, int, struct mbuf *, + struct mbuf *, struct mbuf *, struct proc *); + + int (*pr_attach)(struct socket *, int); + int (*pr_detach)(struct socket *); + +/* utility hooks */ + void (*pr_init)(void); /* initialization hook */ + void (*pr_fasttimo)(void); /* fast timeout (200ms) */ + void (*pr_slowtimo)(void); /* slow timeout (500ms) */ + /* sysctl for protocol */ + int (*pr_sysctl)(int *, u_int, void *, size_t *, void *, size_t); +}; + +#define PR_SLOWHZ 2 /* 2 slow timeouts per second */ +#define PR_FASTHZ 5 /* 5 fast timeouts per second */ + +/* + * Values for pr_flags. + * PR_ADDR requires PR_ATOMIC; + * PR_ADDR and PR_CONNREQUIRED are mutually exclusive. + */ +#define PR_ATOMIC 0x01 /* exchange atomic messages only */ +#define PR_ADDR 0x02 /* addresses given with messages */ +#define PR_CONNREQUIRED 0x04 /* connection required by protocol */ +#define PR_WANTRCVD 0x08 /* want PRU_RCVD calls */ +#define PR_RIGHTS 0x10 /* passes capabilities */ +#define PR_ABRTACPTDIS 0x20 /* abort on accept(2) to disconnected + socket */ +#define PR_SPLICE 0x40 /* socket splicing is possible */ + +/* + * The arguments to usrreq are: + * (*protosw[].pr_usrreq)(up, req, m, nam, opt); + * where up is a (struct socket *), req is one of these requests, + * m is a optional mbuf chain containing a message, + * nam is an optional mbuf chain containing an address, + * and opt is a pointer to a socketopt structure or nil. + * The protocol is responsible for disposal of the mbuf chain m, + * the caller is responsible for any space held by nam and opt. + * A non-zero return from usrreq gives an + * UNIX error number which should be passed to higher level software. + */ +#define PRU_ATTACH 0 /* attach protocol to up */ +#define PRU_DETACH 1 /* detach protocol from up */ +#define PRU_BIND 2 /* bind socket to address */ +#define PRU_LISTEN 3 /* listen for connection */ +#define PRU_CONNECT 4 /* establish connection to peer */ +#define PRU_ACCEPT 5 /* accept connection from peer */ +#define PRU_DISCONNECT 6 /* disconnect from peer */ +#define PRU_SHUTDOWN 7 /* won't send any more data */ +#define PRU_RCVD 8 /* have taken data; more room now */ +#define PRU_SEND 9 /* send this data */ +#define PRU_ABORT 10 /* abort (fast DISCONNECT, DETACH) */ +#define PRU_CONTROL 11 /* control operations on protocol */ +#define PRU_SENSE 12 /* return status into m */ +#define PRU_RCVOOB 13 /* retrieve out of band data */ +#define PRU_SENDOOB 14 /* send out of band data */ +#define PRU_SOCKADDR 15 /* fetch socket's address */ +#define PRU_PEERADDR 16 /* fetch peer's address */ +#define PRU_CONNECT2 17 /* connect two sockets */ +/* begin for protocols internal use */ +#define PRU_FASTTIMO 18 /* 200ms timeout */ +#define PRU_SLOWTIMO 19 /* 500ms timeout */ +#define PRU_PROTORCV 20 /* receive from below */ +#define PRU_PROTOSEND 21 /* send to below */ + +#define PRU_NREQ 22 + +#ifdef PRUREQUESTS +const char *prurequests[] = { + "ATTACH", "DETACH", "BIND", "LISTEN", + "CONNECT", "ACCEPT", "DISCONNECT", "SHUTDOWN", + "RCVD", "SEND", "ABORT", "CONTROL", + "SENSE", "RCVOOB", "SENDOOB", "SOCKADDR", + "PEERADDR", "CONNECT2", "FASTTIMO", "SLOWTIMO", + "PROTORCV", "PROTOSEND", +}; +#endif + +/* + * The arguments to the ctlinput routine are + * (*protosw[].pr_ctlinput)(cmd, sa, arg); + * where cmd is one of the commands below, sa is a pointer to a sockaddr, + * and arg is an optional caddr_t argument used within a protocol family. + */ +#define PRC_IFDOWN 0 /* interface transition */ +#define PRC_ROUTEDEAD 1 /* select new route if possible ??? */ +#define PRC_MTUINC 2 /* increase in mtu to host */ +#define PRC_QUENCH2 3 /* DEC congestion bit says slow down */ +#define PRC_QUENCH 4 /* some one said to slow down */ +#define PRC_MSGSIZE 5 /* message size forced drop */ +#define PRC_HOSTDEAD 6 /* host appears to be down */ +#define PRC_HOSTUNREACH 7 /* deprecated (use PRC_UNREACH_HOST) */ +#define PRC_UNREACH_NET 8 /* no route to network */ +#define PRC_UNREACH_HOST 9 /* no route to host */ +#define PRC_UNREACH_PROTOCOL 10 /* dst says bad protocol */ +#define PRC_UNREACH_PORT 11 /* bad port # */ +/* was PRC_UNREACH_NEEDFRAG 12 (use PRC_MSGSIZE) */ +#define PRC_UNREACH_SRCFAIL 13 /* source route failed */ +#define PRC_REDIRECT_NET 14 /* net routing redirect */ +#define PRC_REDIRECT_HOST 15 /* host routing redirect */ +#define PRC_REDIRECT_TOSNET 16 /* redirect for type of service & net */ +#define PRC_REDIRECT_TOSHOST 17 /* redirect for tos & host */ +#define PRC_TIMXCEED_INTRANS 18 /* packet lifetime expired in transit */ +#define PRC_TIMXCEED_REASS 19 /* lifetime expired on reass q */ +#define PRC_PARAMPROB 20 /* header incorrect */ + +#define PRC_NCMDS 21 + +#define PRC_IS_REDIRECT(cmd) \ + ((cmd) >= PRC_REDIRECT_NET && (cmd) <= PRC_REDIRECT_TOSHOST) + +#ifdef PRCREQUESTS +char *prcrequests[] = { + "IFDOWN", "ROUTEDEAD", "MTUINC", "DEC-BIT-QUENCH2", + "QUENCH", "MSGSIZE", "HOSTDEAD", "#7", + "NET-UNREACH", "HOST-UNREACH", "PROTO-UNREACH", "PORT-UNREACH", + "#12", "SRCFAIL-UNREACH", "NET-REDIRECT", "HOST-REDIRECT", + "TOSNET-REDIRECT", "TOSHOST-REDIRECT", "TX-INTRANS", "TX-REASS", + "PARAMPROB" +}; +#endif + +/* + * The arguments to ctloutput are: + * (*protosw[].pr_ctloutput)(req, so, level, optname, optval); + * req is one of the actions listed below, so is a (struct socket *), + * level is an indication of which protocol layer the option is intended. + * optname is a protocol dependent socket option request, + * optval is a pointer to a mbuf-chain pointer, for value-return results. + * The protocol is responsible for disposal of the mbuf chain *optval + * if supplied, + * the caller is responsible for any space held by *optval, when returned. + * A non-zero return from usrreq gives an + * UNIX error number which should be passed to higher level software. + */ +#define PRCO_GETOPT 0 +#define PRCO_SETOPT 1 + +#define PRCO_NCMDS 2 + +#ifdef PRCOREQUESTS +char *prcorequests[] = { + "GETOPT", "SETOPT", +}; +#endif + +#ifdef _KERNEL +struct sockaddr; +const struct protosw *pffindproto(int, int, int); +const struct protosw *pffindtype(int, int); +void pfctlinput(int, struct sockaddr *); + +extern u_char ip_protox[]; +extern const struct protosw inetsw[]; +#endif -- cgit v1.2.3