.\"	$OpenBSD: compress.3,v 1.21 2021/07/06 06:26:05 jmc Exp $
.\"
.\"  Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
.\"
.\"  This software is provided 'as-is', without any express or implied
.\"  warranty.  In no event will the authors be held liable for any damages
.\"  arising from the use of this software.
.\"
.\"  Permission is granted to anyone to use this software for any purpose,
.\"  including commercial applications, and to alter it and redistribute it
.\"  freely, subject to the following restrictions:
.\"
.\"  The origin of this software must not be misrepresented; you must not
.\"  claim that you wrote the original software. If you use this software
.\"  in a product, an acknowledgment in the product documentation would be
.\"  appreciated but is not required.
.\"  Altered source versions must be plainly marked as such, and must not be
.\"  misrepresented as being the original software.
.\"  This notice may not be removed or altered from any source distribution.
.\"
.\" Converted to mdoc format for the OpenBSD project
.\" by Jason McIntyre <jmc@openbsd.org>
.\"
.\" This page corresponds to zlib version 1.2.3
.\"
.Dd $Mdocdate: July 6 2021 $
.Dt COMPRESS 3
.Os
.Sh NAME
.Nm compress ,
.Nm zlibVersion ,
.Nm deflateInit ,
.Nm deflate ,
.Nm deflateEnd ,
.Nm inflateInit ,
.Nm inflate ,
.Nm inflateEnd ,
.Nm deflateInit2 ,
.Nm deflateSetDictionary ,
.Nm deflateGetDictionary ,
.Nm deflateCopy ,
.Nm deflateReset ,
.Nm deflateParams ,
.Nm deflateTune ,
.Nm deflateBound ,
.Nm deflatePending ,
.Nm deflatePrime ,
.Nm deflateSetHeader ,
.Nm inflateInit2 ,
.Nm inflateSetDictionary ,
.Nm inflateGetDictionary ,
.Nm inflateSync ,
.Nm inflateCopy ,
.Nm inflateReset ,
.Nm inflateReset2 ,
.Nm inflatePrime ,
.Nm inflateMark ,
.Nm inflateGetHeader ,
.Nm inflateBackInit ,
.Nm inflateBack ,
.Nm inflateBackEnd ,
.Nm zlibCompileFlags ,
.Nm compress2 ,
.Nm compressBound ,
.Nm uncompress ,
.Nm uncompress2 ,
.Nm gzopen ,
.Nm gzdopen ,
.Nm gzbuffer ,
.Nm gzsetparams ,
.Nm gzread ,
.Nm gzfread ,
.Nm gzwrite ,
.Nm gzfwrite ,
.Nm gzprintf ,
.Nm gzputs ,
.Nm gzgets ,
.Nm gzputc ,
.Nm gzgetc ,
.Nm gzungetc ,
.Nm gzflush ,
.Nm gzseek ,
.Nm gzrewind ,
.Nm gztell ,
.Nm gzoffset ,
.Nm gzeof ,
.Nm gzdirect ,
.Nm gzclose ,
.Nm gzclose_r ,
.Nm gzclose_w ,
.Nm gzerror ,
.Nm gzclearerr ,
.Nm adler32 ,
.Nm adler32_z ,
.Nm adler32_combine ,
.Nm crc32 ,
.Nm crc32_z ,
.Nm crc32_combine
.Nd zlib general purpose compression library
.Sh SYNOPSIS
.In zlib.h
.Pp
Basic functions
.Pp
.Ft const char *
.Fn zlibVersion "void"
.Ft int
.Fn deflateInit "z_streamp strm" "int level"
.Ft int
.Fn deflate "z_streamp strm" "int flush"
.Ft int
.Fn deflateEnd "z_streamp strm"
.Ft int
.Fn inflateInit "z_streamp strm"
.Ft int
.Fn inflate "z_streamp strm" "int flush"
.Ft int
.Fn inflateEnd "z_streamp strm"
.Pp
Advanced functions
.Pp
.Ft int
.Fn deflateInit2 "z_streamp strm" "int level" "int method" "int windowBits" "int memLevel" "int strategy"
.Ft int
.Fn deflateSetDictionary "z_streamp strm" "const Bytef *dictionary" "uInt dictLength"
.Ft int
.Fn deflateGetDictionary "z_streamp strm" "Bytef *dictionary" "uInt *dictLength"
.Ft int
.Fn deflateCopy "z_streamp dest" "z_streamp source"
.Ft int
.Fn deflateReset "z_streamp strm"
.Ft int
.Fn deflateParams "z_streamp strm" "int level" "int strategy"
.Ft int
.Fn deflateTune "z_streamp strm" "int good_length" "int max_lazy" "int nice_length" "int max_chain"
.Ft uLong
.Fn deflateBound "z_streamp strm" "uLong sourceLen"
.Ft int
.Fn deflatePending "z_streamp strm" "unsigned *pending" "int *bits"
.Ft int
.Fn deflatePrime "z_streamp strm" "int bits" "int value"
.Ft int
.Fn deflateSetHeader "z_streamp strm" "gz_headerp head"
.Ft int
.Fn inflateInit2 "z_streamp strm" "int windowBits"
.Ft int
.Fn inflateSetDictionary "z_streamp strm" "const Bytef *dictionary" "uInt dictLength"
.Ft int
.Fn inflateGetDictionary "z_streamp strm" "Bytef *dictionary" "uInt *dictLength"
.Ft int
.Fn inflateSync "z_streamp strm"
.Ft int
.Fn inflateCopy "z_streamp dst" "z_streamp source"
.Ft int
.Fn inflateReset "z_streamp strm"
.Ft int
.Fn inflateReset2 "z_streamp strm" "int windowBits"
.Ft int
.Fn inflatePrime "z_streamp strm" "int bits" "int value"
.Ft int
.Fn inflateMark "z_streamp strm"
.Ft int
.Fn inflateGetHeader "z_streamp strm" "gz_headerp head"
.Ft int
.Fn inflateBackInit "z_stream *strm" "int windowBits" "unsigned char FAR *window"
.Ft int
.Fn inflateBack "z_stream *strm" "in_func in" "void FAR *in_desc" "out_func out" "void FAR *out_desc"
.Ft int
.Fn inflateBackEnd "z_stream *strm"
.Ft uLong
.Fn zlibCompileFlags "void"
.Pp
Utility functions
.Pp
.Fd typedef voidp gzFile;
.Pp
.Ft int
.Fn compress "Bytef *dest" "uLongf *destLen" "const Bytef *source" "uLong sourceLen"
.Ft int
.Fn compress2 "Bytef *dest" "uLongf *destLen" "const Bytef *source" "uLong sourceLen" "int level"
.Ft uLong
.Fn compressBound "uLong sourceLen"
.Ft int
.Fn uncompress "Bytef *dest" "uLongf *destLen" "const Bytef *source" "uLong sourceLen"
.Ft int
.Fn uncompress2 "Bytef *dest" "uLongf *destLen" "const Bytef *source" "uLong *sourceLen"
.Ft gzFile
.Fn gzopen "const char *path" "const char *mode"
.Ft gzFile
.Fn gzdopen "int fd" "const char *mode"
.Ft int
.Fn gzbuffer "gzFile file" "unsigned size"
.Ft int
.Fn gzsetparams "gzFile file" "int level" "int strategy"
.Ft int
.Fn gzread "gzFile file" "voidp buf" "unsigned len"
.Ft int
.Fn gzfread "voidp buf" "z_size_t size" "z_size_t nitems" "gzFile file"
.Ft int
.Fn gzwrite "gzFile file" "voidpc buf" "unsigned len"
.Ft int
.Fn gzfwrite "voidpc buf" "z_size_t size" "z_size_t nitems" "gzFile file"
.Ft int
.Fn gzprintf "gzFile file" "const char *format" "..."
.Ft int
.Fn gzputs "gzFile file" "const char *s"
.Ft char *
.Fn gzgets "gzFile file" "char *buf" "int len"
.Ft int
.Fn gzputc "gzFile file" "int c"
.Ft int
.Fn gzgetc "gzFile file"
.Ft int
.Fn gzungetc "int c" "gzFile file"
.Ft int
.Fn gzflush "gzFile file" "int flush"
.Ft z_off_t
.Fn gzseek "gzFile file" "z_off_t offset" "int whence"
.Ft int
.Fn gzrewind "gzFile file"
.Ft z_off_t
.Fn gztell "gzFile file"
.Ft int
.Fn gzoffset "gzFile file"
.Ft int
.Fn gzeof "gzFile file"
.Ft int
.Fn gzdirect "gzFile file"
.Ft int
.Fn gzclose "gzFile file"
.Ft int
.Fn gzclose_r "gzFile file"
.Ft int
.Fn gzclose_w "gzFile file"
.Ft const char *
.Fn gzerror "gzFile file" "int *errnum"
.Ft void
.Fn gzclearerr "gzFile file"
.Pp
Checksum functions
.Pp
.Ft uLong
.Fn adler32 "uLong adler" "const Bytef *buf" "uInt len"
.Ft uLong
.Fn adler32_z "uLong adler" "const Bytef *buf" "z_size_t len"
.Ft uLong
.Fn adler32_combine "uLong adler1" "uLong adler2" "z_off_t len2"
.Ft uLong
.Fn crc32 "uLong crc" "const Bytef *buf" "uInt len"
.Ft uLong
.Fn crc32_z "uLong adler" "const Bytef *buf" "z_size_t len"
.Ft uLong
.Fn crc32_combine "uLong crc1" "uLong crc2" "z_off_t len2"
.Sh DESCRIPTION
This manual page describes the
.Nm zlib
general purpose compression library, version 1.2.11.
.Pp
The
.Nm zlib
compression library provides in-memory compression and decompression functions,
including integrity checks of the uncompressed data.
This version of the library supports only one compression method
.Pq deflation
but other algorithms will be added later and will have the same
stream interface.
.Pp
Compression can be done in a single step if the buffers are large enough
or can be done by repeated calls of the compression function.
In the latter case, the application must provide more input
and/or consume the output
.Pq providing more output space
before each call.
.Pp
The compressed data format used by default by the in-memory functions is the
.Nm zlib
format, which is a zlib wrapper documented in RFC 1950,
wrapped around a deflate stream, which is itself documented in RFC 1951.
.Pp
The library also supports reading and writing files in
.Xr gzip 1
.Pq .gz
format with an interface similar to that of
.Xr stdio 3
using the functions that start with
.Qq gz .
The gzip format is different from the zlib format.
gzip is a gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
This library can optionally read and write gzip and raw deflate streams
in memory as well.
.Pp
The zlib format was designed to be compact and fast for use in memory
and on communications channels.
The gzip format was designed for single-file compression on file systems,
has a larger header than zlib to maintain directory information,
and uses a different, slower, check method than zlib.
.Pp
The library does not install any signal handler.
The decoder checks the consistency of the compressed data,
so the library should never crash even in the case of corrupted input.
.Pp
The functions within the library are divided into the following sections:
.Pp
.Bl -dash -offset indent -compact
.It
Basic functions
.It
Advanced functions
.It
Utility functions
.It
Checksum functions
.El
.Sh BASIC FUNCTIONS
.Bl -tag -width Ds
.It Xo
.Fa const char *
.Fn zlibVersion "void" ;
.Xc
.Pp
The application can compare
.Fn zlibVersion
and
.Dv ZLIB_VERSION
for consistency.
If the first character differs, the library code actually used is
not compatible with the
.In zlib.h
header file used by the application.
This check is automatically made by
.Fn deflateInit
and
.Fn inflateInit .
.It Xo
.Fa int
.Fn deflateInit "z_streamp strm" "int level" ;
.Xc
.Pp
The
.Fn deflateInit
function initializes the internal stream state for compression.
The fields
.Fa zalloc ,
.Fa zfree ,
and
.Fa opaque
must be initialized before by the caller.
If
.Fa zalloc
and
.Fa zfree
are set to
.Dv NULL ,
.Fn deflateInit
updates them to use default allocation functions.
.Pp
The compression level must be
.Dv Z_DEFAULT_COMPRESSION ,
or between 0 and 9:
1 gives best speed, 9 gives best compression, 0 gives no compression at all
(the input data is simply copied a block at a time).
.Pp
.Dv Z_DEFAULT_COMPRESSION
requests a default compromise between speed and compression
.Pq currently equivalent to level 6 .
.Pp
.Fn deflateInit
returns
.Dv Z_OK
if successful,
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_STREAM_ERROR
if level is not a valid compression level,
.Dv Z_VERSION_ERROR
if the
.Nm zlib
library version
.Pq zlib_version
is incompatible with the version assumed by the caller
.Pq ZLIB_VERSION .
.Fa msg
is set to null if there is no error message.
.Fn deflateInit
does not perform any compression: this will be done by
.Fn deflate .
.It Xo
.Fa int
.Fn deflate "z_streamp strm" "int flush" ;
.Xc
.Pp
.Fn deflate
compresses as much data as possible, and stops when the input
buffer becomes empty or the output buffer becomes full.
It may introduce some output latency
.Pq reading input without producing any output
except when forced to flush.
.Pp
The detailed semantics are as follows.
.Fn deflate
performs one or both of the following actions:
.Pp
Compress more input starting at
.Fa next_in
and update
.Fa next_in
and
.Fa avail_in
accordingly.
If not all input can be processed
(because there is not enough room in the output buffer),
.Fa next_in
and
.Fa avail_in
are updated and processing will resume at this point for the next call to
.Fn deflate .
.Pp
Generate more output starting at
.Fa next_out
and update
.Fa next_out
and
.Fa avail_out
accordingly.
This action is forced if the parameter
.Fa flush
is non-zero.
Forcing
.Fa flush
frequently degrades the compression ratio,
so this parameter should be set only when necessary.
Some output may be provided even if
.Fa flush
is not set.
.Pp
Before the call to
.Fn deflate ,
the application should ensure that at least
one of the actions is possible, by providing more input and/or consuming
more output, and updating
.Fa avail_in
or
.Fa avail_out
accordingly;
.Fa avail_out
should never be zero before the call.
The application can consume the compressed output when it wants,
for example when the output buffer is full
.Pq avail_out == 0 ,
or after each call to
.Fn deflate .
If
.Fn deflate
returns
.Dv Z_OK
and with zero
.Fa avail_out ,
it must be called again after making room in the
output buffer because there might be more output pending.
See
.Fn deflatePending ,
which can be used if desired to determine whether or not there is more output
in that case.
.Pp
Normally the parameter
.Fa flush
is set to
.Dv Z_NO_FLUSH ,
which allows
.Fn deflate
to decide how much data to accumulate before producing output,
in order to maximise compression.
.Pp
If the parameter
.Fa flush
is set to
.Dv Z_SYNC_FLUSH ,
all pending output is flushed to the output buffer and the output
is aligned on a byte boundary,
so that the decompressor can get all input data available so far.
(In particular
.Fa avail_in
is zero after the call
if enough output space has been provided before the call.)
Flushing may degrade compression for some compression algorithms
and so it should be used only when necessary.
This completes the current deflate block and follows it with
an empty stored block that is three bits plus filler bits to the next byte,
followed by four bytes (00 00 ff ff).
.Pp
If
.Fa flush
is set to
.Dv Z_PARTIAL_FLUSH ,
all pending output is flushed to the output buffer,
but the output is not aligned to a byte boundary.
All of the input data so far will be available to the decompressor, as for
.Dv Z_SYNC_FLUSH .
This completes the current deflate block and follows it with an empty fixed
code block that is 10 bits long.
This assures that enough bytes are output in order for the decompressor to
finish the block before the empty fixed codes block.
.Pp
If
.Fa flush
is set to
.Dv Z_BLOCK ,
a deflate block is completed and emitted, as for
.Dv Z_SYNC_FLUSH ,
but the output is not aligned on a byte boundary,
and up to seven bits of the current block are held to be written as
the next byte after the next deflate block is completed.
In this case, the decompressor may not be provided enough bits at this point in
order to complete decompression of the data provided so far to the compressor.
It may need to wait for the next block to be emitted.
This is for advanced applications that need to control
the emission of deflate blocks.
.Pp
If
.Fa flush
is set to
.Dv Z_FULL_FLUSH ,
all output is flushed as with
.Dv Z_SYNC_FLUSH ,
and the compression state is reset so that decompression can restart from this
point if previous compressed data has been damaged or if random access
is desired.
Using
.Dv Z_FULL_FLUSH
too often can seriously degrade compression.
.Pp
If
.Fn deflate
returns with avail_out == 0, this function must be called again
with the same value of the flush parameter and more output space
(updated
.Fa avail_out ) ,
until the flush is complete
.Pf ( Fn deflate
returns with non-zero
.Fa avail_out ) .
In the case of a
.Dv Z_FULL_FLUSH
or a
.Dv Z_SYNC_FLUSH ,
make sure that
.Fa avail_out
is greater than six to avoid repeated flush markers due to avail_out == 0
on return.
.Pp
If the parameter
.Fa flush
is set to
.Dv Z_FINISH ,
pending input is processed, pending output is flushed and
.Fn deflate
returns with
.Dv Z_STREAM_END
if there was enough output space.
If
.Fn deflate
returns with
.Dv Z_OK
or
.Dv Z_BUF_ERROR ,
this function must be called again with
.Dv Z_FINISH
and more output space
(updated
.Fa avail_out
but no more input data, until it returns with
.Dv Z_STREAM_END
or an error.
After
.Fn deflate
has returned
.Dv Z_STREAM_END ,
the only possible operations on the stream are
.Fn deflateReset
or
.Fn deflateEnd .
.Pp
.Dv Z_FINISH
can be used in the first deflate call after
.Fn deflateInit
if all the compression is to be done in a single step.
In order to complete in one call,
.Fa avail_out
must be at least the value returned by
.Fn deflateBound
(see below).
Then
.Fn deflate
is guaranteed to return
.Dv Z_STREAM_END .
If not enough output space is provided,
.Fn deflate
will not return
.Dv Z_STREAM_END ,
and it must be called again as described above.
.Pp
.Fn deflate
sets strm->adler to the Adler-32 checksum of all input read so far
(that is,
.Fa total_in
bytes).
If a gzip stream is being generated,
then strm->adler will be the CRC-32 checksum of the input read so far.
(See
.Fn deflateInit2
below.)
.Pp
.Fn deflate
may update strm->data_type
if it can make a good guess about the input data type
.Pq Z_BINARY or Z_TEXT .
If in doubt, the data is considered binary.
This field is only for information purposes and does not affect
the compression algorithm in any manner.
.Pp
.Fn deflate
returns
.Dv Z_OK
if some progress has been made
.Pq more input processed or more output produced ,
.Dv Z_STREAM_END
if all input has been consumed and all output has been produced
(only when
.Fa flush
is set to
.Dv Z_FINISH ) ,
.Dv Z_STREAM_ERROR
if the stream state was inconsistent
(for example, if
.Fa next_in
or
.Fa next_out
was
.Dv NULL
or the state was inadvertently written over by the application), or
.Dv Z_BUF_ERROR
if no progress is possible
(for example,
.Fa avail_in
or
.Fa avail_out
was zero).
Note that
.Dv Z_BUF_ERROR
is not fatal, and
.Fn deflate
can be called again with more input and more output space
to continue compressing.
.It Xo
.Fa int
.Fn deflateEnd "z_streamp strm" ;
.Xc
.Pp
All dynamically allocated data structures for this stream are freed.
This function discards any unprocessed input and does not flush any
pending output.
.Pp
.Fn deflateEnd
returns
.Dv Z_OK
if successful,
.Dv Z_STREAM_ERROR
if the stream state was inconsistent,
.Dv Z_DATA_ERROR
if the stream was freed prematurely
.Pq some input or output was discarded .
In the error case,
.Fa msg
may be set but then points to a static string
.Pq which must not be deallocated .
.It Xo
.Fa int
.Fn inflateInit "z_streamp strm" ;
.Xc
The
.Fn inflateInit
function initializes the internal stream state for decompression.
The fields
.Fa next_in ,
.Fa avail_in ,
.Fa zalloc ,
.Fa zfree ,
and
.Fa opaque
must be initialized before by the caller.
In the current version of
.Fn inflate ,
the provided input is not read or consumed.
The allocation of a sliding window will be deferred to the first call of
.Fn inflate
(if the decompression does not complete on the first call).
If
.Fa zalloc
and
.Fa zfree
are set to
.Dv NULL ,
.Fn inflateInit
updates them to use default allocation functions.
.Pp
.Fn inflateInit
returns
.Dv Z_OK
if successful,
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_VERSION_ERROR
if the
.Nm zlib
library version is incompatible with the version assumed by the caller or
.Dv Z_STREAM_ERROR
if the parameters are invalid, such as a null pointer to the structure.
.Fa msg
is set to null if there is no error message.
.Fn inflateInit
does not perform any decompression.
Actual decompression will be done by
.Fn inflate .
So
.Fa next_in , avail_in , next_out ,
and
.Fa avail_out
are unused and unchanged.
The current implementation of
.Fn inflateInit
does not process any header information \(em
that is deferred until
.Fn inflate
is called.
.It Xo
.Fa int
.Fn inflate "z_streamp strm" "int flush" ;
.Xc
.Fn inflate
decompresses as much data as possible, and stops when the input
buffer becomes empty or the output buffer becomes full.
It may introduce some output latency
.Pq reading input without producing any output
except when forced to flush.
.Pp
The detailed semantics are as follows.
.Fn inflate
performs one or both of the following actions:
.Pp
Decompress more input starting at
.Fa next_in
and update
.Fa next_in
and
.Fa avail_in
accordingly.
If not all input can be processed
(because there is not enough room in the output buffer), then
.Fa next_in
and
.Fa avail_in
are updated accordingly,
and processing will resume at this point for the next call to
.Fn inflate .
.Pp
Generate more output starting at
.Fa next_out
and update
.Fa next_out
and
.Fa avail_out
accordingly.
.Fn inflate
provides as much output as possible,
until there is no more input data or no more space in the output buffer
.Pq see below about the flush parameter .
.Pp
Before the call to
.Fn inflate ,
the application should ensure that at least one of the actions is possible,
by providing more input and/or consuming more output,
and updating the next_* and avail_* values accordingly.
If the caller of
.Fn inflate
does not provide both available input and available output space,
it is possible that there will be no progress made.
The application can consume the uncompressed output when it wants,
for example when the output buffer is full (avail_out == 0),
or after each call to
.Fn inflate .
If
.Fn inflate
returns
.Dv Z_OK
and with zero
.Fa avail_out ,
it must be called again after making room
in the output buffer because there might be more output pending.
.Pp
The
.Fa flush
parameter of
.Fn inflate
can be
.Dv Z_NO_FLUSH , Z_SYNC_FLUSH , Z_FINISH , Z_BLOCK
or
.Dv Z_TREES .
.Dv Z_SYNC_FLUSH
requests that
.Fn inflate
flush as much output as possible to the output buffer.
.Dv Z_BLOCK
requests that
.Fn inflate
stop if and when it gets to the next deflate block boundary.
When decoding the zlib or gzip format, this will cause
.Fn inflate
to return immediately after the header and before the first block.
When doing a raw inflate,
.Fn inflate
will go ahead and process the first block,
and will return when it gets to the end of that block,
or when it runs out of data.
.Pp
The
.Dv Z_BLOCK
option assists in appending to or combining deflate streams.
To assist in this, on return
.Fn inflate
always sets strm->data_type to the number of unused bits
in the last byte taken from strm->next_in, plus 64 if
.Fn inflate
is currently decoding the last block in the deflate stream, plus 128 if
.Fn inflate
returned immediately after decoding an end-of-block code or decoding the
complete header up to just before the first byte of the deflate stream.
The end-of-block will not be indicated until all of the uncompressed
data from that block has been written to strm->next_out.
The number of unused bits may in general be greater than seven,
except when bit 7 of data_type is set,
in which case the number of unused bits will be less than eight.
.Fa data_type
is set as noted here every time
.Fn inflate
returns for all flush options,
and so can be used to determine the amount of currently consumed input in bits.
.Pp
The
.Dv Z_TREES
option behaves as
.Dv Z_BLOCK
does, but it also returns when the end of each deflate block header is reached,
before any actual data in that block is decoded.
This allows the caller to determine the length of the deflate block header for
later use in random access within a deflate block.
256 is added to the value of strm->data_type when
.Fn inflate
returns immediately after reaching the end of the deflate block header.
.Pp
.Fn inflate
should normally be called until it returns
.Dv Z_STREAM_END
or an error.
However if all decompression is to be performed in a single step
.Pq a single call to inflate ,
the parameter
.Fa flush
should be set to
.Dv Z_FINISH .
In this case all pending input is processed and all pending output is flushed;
.Fa avail_out
must be large enough to hold all the uncompressed data
for the operation to complete.
(The size of the uncompressed data may have been saved
by the compressor for this purpose.)
The use of
.Dv Z_FINISH
is not required to perform an inflation in one step.
However it may be used to inform
.Fn inflate
that a faster approach can be used for the single
.Fn inflate
call.
.Dv Z_FINISH
also informs
.Fn inflate
to not maintain a sliding window if the stream completes,
which reduces its memory footprint.
If the stream does not complete,
either because not all of the stream is provided or not enough output space
is provided, then a sliding window will be allocated and
.Fn inflate
can be called again to continue the operation as if
.Dv Z_NO_FLUSH
had been used.
.Pp
In this implementation,
.Fn inflate
always flushes as much output as possible to the output buffer,
and always uses the faster approach on the first call.
So the effects of the flush parameter in this implementation are
on the return value of
.Fn inflate
as noted below,
when
.Fn inflate
returns early when
.Dv Z_BLOCK
or
.Dv Z_TREES
is used, and when
.Fn inflate
avoids the allocation of memory for a sliding window when
.Dv Z_FINISH
is used.
.Pp
If a preset dictionary is needed after this call (see
.Fn inflateSetDictionary
below),
.Fn inflate
sets strm->adler to the Adler-32 checksum of the dictionary
chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
strm->adler to the Adler-32 checksum of all output produced so far
(that is,
.Fa total_out
bytes) and returns
.Dv Z_OK , Z_STREAM_END
or an error code as described below.
At the end of the stream,
.Fn inflate
checks that its computed Adler-32 checksum is equal to that saved by
the compressor and returns
.Dv Z_STREAM_END
only if the checksum is correct.
.Pp
.Fn inflate
can decompress and check either zlib-wrapped or gzip-wrapped deflate data.
The header type is detected automatically, if requested when initializing with
.Fn inflateInit2 .
Any information contained in the gzip header is not retained unless
.Fn inflateGetHeader
is used.
When processing gzip-wrapped deflate data, strm->adler32 is set to the CRC-32
of the output produced so far.
The CRC-32 is checked against the gzip trailer,
as is the uncompressed length, modulo 2^32.
.Pp
.Fn inflate
returns
.Dv Z_OK
if some progress has been made
.Pq more input processed or more output produced ,
.Dv Z_STREAM_END
if the end of the compressed data has been reached and all uncompressed output
has been produced,
.Dv Z_NEED_DICT
if a preset dictionary is needed at this point,
.Dv Z_DATA_ERROR
if the input data was corrupted (input stream not conforming to the
.Nm zlib
format or incorrect check value,
in which case strm->msg points to a string with a more specific error),
.Dv Z_STREAM_ERROR
if the stream structure was inconsistent
(for example,
.Fa next_in
or
.Fa next_out
was
.Dv NULL ,
or the state was inadvertently over by the application),
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_BUF_ERROR
if no progress was possible or if there was not enough room in the output buffer
when
.Dv Z_FINISH
is used.
Note that
.Dv Z_BUF_ERROR
is not fatal, and
.Fn inflate
can be called again with more input and more output space
to continue compressing.
If
.Dv Z_DATA_ERROR
is returned, the application may then call
.Fn inflateSync
to look for a good compression block if a partial recovery
of the data is desired.
.It Xo
.Fa int
.Fn inflateEnd "z_streamp strm" ;
.Xc
All dynamically allocated data structures for this stream are freed.
This function discards any unprocessed input and does not flush any
pending output.
.Pp
.Fn inflateEnd
returns
.Dv Z_OK
if successful, or
.Dv Z_STREAM_ERROR
if the stream state was inconsistent.
In the error case,
.Fa msg
may be set but then points to a static string
.Pq which must not be deallocated .
.El
.Sh ADVANCED FUNCTIONS
The following functions are needed only in some special applications.
.Bl -tag -width Ds
.It Xo
.Fa int
.Fn deflateInit2 "z_streamp strm" "int level" "int method" "int windowBits" "int memLevel" "int strategy" ;
.Xc
.Pp
This is another version of
.Fn deflateInit
with more compression options.
The fields
.Fa next_in ,
.Fa zalloc ,
.Fa zfree ,
and
.Fa opaque
must be initialized before by the caller.
.Pp
The
.Fa method
parameter is the compression method.
It must be
.Dv Z_DEFLATED
in this version of the library.
.Pp
The
.Fa windowBits
parameter is the base two logarithm of the window size
.Pq the size of the history buffer .
It should be in the range 8..15 for this version of the library.
Larger values of this parameter result in better compression
at the expense of memory usage.
The default value is 15 if
.Fn deflateInit
is used instead.
.Pp
For the current implementation of
.Fn deflate ,
a
.Fa windowBits
value of 8 (a window size of 256 bytes) is not supported.
As a result, a request for 8 will result in 9 (a 512-byte window).
In that case, providing 8 to
.Fn inflateInit2
will result in an error when the zlib header with 9 is
checked against the initialization of
.Fn inflate .
The remedy is to not use 8 with
.Fn deflateInit2
with this initialization, or at least in that case use 9 with
.Fn inflateInit2 .
.Pp
.Fa windowBits
can also be -8..-15 for raw deflate.
In this case, -windowBits determines the window size.
.Fn deflate
will then generate raw deflate data with no zlib header or trailer,
and will not compute a check value.
.Pp
.Fa windowBits
can also be greater than 15 for optional gzip encoding.
Add 16 to
.Fa windowBits
to write a simple gzip header and trailer around the
compressed data instead of a zlib wrapper.
The gzip header will have no file name, no extra data, no comment,
no modification time
.Pq set to zero ,
no header crc, and the operating system will be set to
the appropriate value,
if the operating system was determined at compile time.
If a gzip stream is being written,
strm->adler is a CRC-32 instead of an Adler-32.
.Pp
For raw deflate or gzip encoding, a request for a 256-byte window is
rejected as invalid, since only the zlib header provides a means of
transmitting the window size to the decompressor.
.Pp
The
.Fa memLevel
parameter specifies how much memory should be allocated
for the internal compression state.
memLevel=1 uses minimum memory but is slow and reduces compression ratio;
memLevel=9 uses maximum memory for optimal speed.
The default value is 8.
See
.In zconf.h
for total memory usage as a function of
.Fa windowBits
and
.Fa memLevel .
.Pp
The
.Fa strategy
parameter is used to tune the compression algorithm.
Use the value
.Dv Z_DEFAULT_STRATEGY
for normal data;
.Dv Z_FILTERED
for data produced by a filter
.Pq or predictor ;
.Dv Z_HUFFMAN_ONLY
to force Huffman encoding only
.Pq no string match ,
or
.Dv Z_RLE
to limit match distances to one
.Pq run-length encoding .
Filtered data consists mostly of small values with a
somewhat random distribution.
In this case, the compression algorithm is tuned to compress them better.
The effect of
.Dv Z_FILTERED
is to force more Huffman coding and less string matching;
it is somewhat intermediate between
.Dv Z_DEFAULT_STRATEGY
and
.Dv Z_HUFFMAN_ONLY .
.Dv Z_RLE
is designed to be almost as fast as
.Dv Z_HUFFMAN_ONLY ,
but gives better compression for PNG image data.
The
.Fa strategy
parameter only affects the compression ratio but not the correctness of the
compressed output, even if it is not set appropriately.
.Dv Z_FIXED
prevents the use of dynamic Huffman codes,
allowing for a simpler decoder for special applications.
.Pp
.Fn deflateInit2
returns
.Dv Z_OK
if successful,
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_STREAM_ERROR
if any parameter is invalid
.Pq such as an invalid method ,
or
.Dv Z_VERSION_ERROR
if the zlib library version (zlib_version) is
incompatible with the version assumed by the caller (ZLIB_VERSION).
.Fa msg
is set to null if there is no error message.
.Fn deflateInit2
does not perform any compression: this will be done by
.Fn deflate .
.It Xo
.Fa int
.Fn deflateSetDictionary "z_streamp strm" "const Bytef *dictionary" "uInt dictLength" ;
.Xc
.Pp
Initializes the compression dictionary from the given byte sequence
without producing any compressed output.
When using the zlib format, this function must be called immediately after
.Fn deflateInit , deflateInit2
or
.Fn deflateReset ,
and before any call of
.Fn deflate .
When doing raw deflate, this function must be called either before any call of
.Fn deflate ,
or immediately after the completion of a deflate block,
i.e. after all input has been consumed and all output has been delivered
when using any of the flush options
.Dv Z_BLOCK , Z_PARTIAL_FLUSH , Z_SYNC_FLUSH ,
or
.Dv Z_FULL_FLUSH .
The compressor and decompressor must use exactly the same dictionary
(see
.Fn inflateSetDictionary ) .
.Pp
The dictionary should consist of strings
.Pq byte sequences
that are likely to be encountered later in the data to be compressed,
with the most commonly used strings preferably put towards
the end of the dictionary.
Using a dictionary is most useful when the data to be compressed is short
and can be predicted with good accuracy;
the data can then be compressed better than with the default empty dictionary.
.Pp
Depending on the size of the compression data structures selected by
.Fn deflateInit
or
.Fn deflateInit2 ,
a part of the dictionary may in effect be discarded,
for example if the dictionary is larger than the window size provided in
.Fn deflateInit
or
.Fn deflateInit2 .
Thus the strings most likely to be useful should be
put at the end of the dictionary, not at the front.
In addition, the current implementation of
.Fn deflate
will use at most the window size minus 262 bytes of the provided dictionary.
.Pp
Upon return of this function, strm->adler is set to the Adler-32 value
of the dictionary; the decompressor may later use this value to determine
which dictionary has been used by the compressor.
(The Adler-32 value applies to the whole dictionary even if only a subset
of the dictionary is actually used by the compressor.)
If a raw deflate was requested, then the Adler-32 value is not computed
and strm->adler is not set.
.Pp
.Fn deflateSetDictionary
returns
.Dv Z_OK
if successful,
or
.Dv Z_STREAM_ERROR
if a parameter is invalid
.Pq e.g. dictionary being NULL
or the stream state is inconsistent
(for example if
.Fn deflate
has already been called for this stream or if not at a block boundary for raw
deflate).
.Fn deflateSetDictionary
does not perform any compression: this will be done by
.Fn deflate .
.It Xo
.Fa int
.Fn deflateGetDictionary "z_streamp strm" "Bytef *dictionary uInt *dictLength" ;
.Xc
.Pp
Returns the sliding dictionary being maintained by
.Fn deflate .
.Fa dictLength
is set to the number of bytes in the dictionary, and that many bytes are copied
to
.Fa dictionary .
.Fa dictionary
must have enough space, where 32768 bytes is always enough.
If
.Fn deflateGetDictionary
is called with dictionary equal to
.Dv NULL ,
then only the dictionary length is returned, and nothing is copied.
Similary, if
.Fa dictLength
is
.Dv NULL ,
then it is not set.
.Pp
.Fn deflateGetDictionary
may return a length less than the window size,
even when more than the window size in input has been provided.
It may return up to 258 bytes less in that case,
due to how zlib's implementation of
.Fn deflate
manages the sliding window and lookahead for matches,
where matches can be up to 258 bytes long.
If the application needs the last window-size bytes of input,
then that would need to be saved by the application outside of
.Nm zlib .
.Pp
.Fn deflateGetDictionary
returns
.Dv Z_OK
on success, or
.Dv Z_STREAM_ERROR
if the stream state is inconsistent.
.It Xo
.Fa int
.Fn deflateCopy "z_streamp dest" "z_streamp source" ;
.Xc
.Pp
The
.Fn deflateCopy
function sets the destination stream as a complete copy of the source stream.
.Pp
This function can be useful when several compression strategies will be
tried, for example when there are several ways of pre-processing the input
data with a filter.
The streams that will be discarded should then be freed by calling
.Fn deflateEnd .
Note that
.Fn deflateCopy
duplicates the internal compression state which can be quite large,
so this strategy is slow and can consume lots of memory.
.Pp
.Fn deflateCopy
returns
.Dv Z_OK
if successful,
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent
(such as
.Fa zalloc
being NULL).
.Fa msg
is left unchanged in both source and destination.
.It Xo
.Fa int
.Fn deflateReset "z_streamp strm" ;
.Xc
.Pp
This function is equivalent to
.Fn deflateEnd
followed by
.Fn deflateInit ,
but does not free and reallocate the internal compression state.
The stream will leave the compression level and any other attributes
that may have been set unchanged.
.Pp
.Fn deflateReset
returns
.Dv Z_OK
if successful, or
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent
(such as
.Fa zalloc
or
.Fa state
being NULL).
.It Xo
.Fa int
.Fn deflateParams "z_streamp strm" "int level" "int strategy" ;
.Xc
.Pp
The
.Fn deflateParams
function dynamically updates the compression level and compression strategy.
The interpretation of level and strategy is as in
.Fn deflateInit2 .
This can be used to switch between compression and straight copy
of the input data, or to switch to a different kind of input data
requiring a different strategy.
If the compression approach (which is a function of the level) or the
strategy is changed, and if any input has been consumed in a previous
.Fn deflate
call, then the input available so far is compressed with the old
level and strategy using deflate(strm, Z_BLOCK).
There are three approaches for the compression levels 0, 1..3, and 4..9,
respectively.
The new level and strategy will take effect at the next call of
.Fn deflate .
.Pp
If a deflate(strm, Z_BLOCK) is performed by
.Fn deflateParams ,
and it does not have enough output space to complete,
then the parameter change will not take effect.
In this case,
.Fn deflateParams
can be called again with the same parameters and more output space to try again.
.Pp
In order to assure a change in the parameters on the first try, the
deflate stream should be flushed using
.Fn deflate
with
.Dv Z_BLOCK
or other flush request until
.Fa strm.avail_out
is not zero, before calling
.Fn deflateParams .
Then no more input data should be provided before the
.Fn deflateParams
call.
If this is done, the old level and strategy will be applied to the data
compressed before
.Fn deflateParams ,
and the new level and strategy will be applied to the the data compressed after
.Fn deflateParams .
.Pp
.Fn deflateParams
returns
.Dv Z_OK
on success,
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent or if a parameter was invalid, or
.Dv Z_BUF_ERROR
if there was not enough output space to complete the compression of the
available input data before a change in the strategy or approach.
Note that in the case of a
.Dv Z_BUF_ERROR ,
the parameters are not changed.
A return value of
.Dv Z_BUF_ERROR
is not fatal, in which case
.Fn deflateParams
can be retried with more output space.
.It Xo
.Fa int
.Fn deflateTune "z_streamp strm" "int good_length" "int max_lazy" "int nice_length" "int max_chain" ;
.Xc
.Pp
Fine tune
.Fn deflate Ns 's
internal compression parameters.
This should only be used by someone who understands the algorithm
used by zlib's deflate for searching for the best matching string,
and even then only by the most fanatic optimizer
trying to squeeze out the last compressed bit for their specific input data.
Read the
.Pa deflate.c
source code for the meaning of the
.Fa max_lazy , good_length , nice_length ,
and
.Fa max_chain
parameters.
.Pp
.Fn deflateTune
can be called after
.Fn deflateInit
or
.Fn deflateInit2 ,
and returns
.Dv Z_OK
on success, or
.Dv Z_STREAM_ERROR
for an invalid deflate stream.
.It Xo
.Fa uLong
.Fn deflateBound "z_streamp strm" "uLong sourceLen" ;
.Xc
.Pp
.Fn deflateBound
returns an upper bound on the compressed size after deflation of
.Fa sourceLen
bytes.
It must be called after
.Fn deflateInit
or
.Fn deflateInit2 .
and after
.Fn deflateSetHeader ,
if used.
This would be used to allocate an output buffer for deflation in a single pass,
and so would be called before
.Fn deflate .
If that first
.Fn deflate
call is provided the
.Fa sourceLen
input bytes, an output buffer allocated to the size returned by
.Fn deflateBound ,
and the flush value
.Dv Z_FINISH ,
then
.Fn deflate
is guaranteed to return
.Dv Z_STREAM_END .
Note that it is possible for the compressed size to be larger than
the value returned by
.Fn deflateBound
if flush options other than
.Dv Z_FINISH
or
.Dv Z_NO_FLUSH
are used.
.It Xo
.Fa int
.Fn deflatePending "z_streamp strm" "unsigned *pending" "int *bits" ;
.Xc
.Pp
.Fn deflatePending
returns the number of bytes and bits of output that have been generated,
but not yet provided in the available output.
The bytes not provided would be due to the available output space
having been consumed.
The number of bits of output not provided are between 0 and 7,
where they await more bits to join them in order to fill out a full byte.
If
.Fa pending
or
.Fa bits
are
.Dv NULL ,
then those values are not set.
.Pp
.Fn deflatePending returns
.Dv Z_OK
if success, or
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent.
.It Xo
.Fa int
.Fn deflatePrime "z_streamp strm" "int bits" "int value" ;
.Xc
.Pp
.Fn deflatePrime
inserts
.Fa bits
in the deflate output stream.
The intent is that this function is used to start off the deflate output
with the bits left over from a previous deflate stream when appending to it.
As such, this function can only be used for raw deflate,
and must be used before the first
.Fn deflate
call after a
.Fn deflateInit2
or
.Fn deflateReset .
.Fa bits
must be less than or equal to 16,
and that many of the least significant bits of
.Fa value
will be inserted in the output.
.Pp
.Fn deflatePrime
returns
.Dv Z_OK
if successful,
.Dv Z_BUF_ERROR
if there was not enough room in the internal buffer to insert the bits, or
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent.
.It Xo
.Fa int
.Fn deflateSetHeader "z_streamp strm" "gz_headerp head" ;
.Xc
.Pp
.Fn deflateSetHeader
provides gzip header information for when a gzip
stream is requested by
.Fn deflateInit2 .
.Fn deflateSetHeader
may be called after
.Fn deflateInit2
or
.Fn deflateReset
and before the first call of
.Fn deflate .
The text, time, os, extra field, name, and comment information
in the provided gz_header structure are written to the gzip header
(xflag is ignored \- the extra flags are set
according to the compression level).
The caller must assure that, if not
.Dv NULL ,
.Fa name
and
.Fa comment
are terminated with a zero byte,
and that if
.Fa extra
is not
.Dv NULL ,
that
.Fa extra_len
bytes are available there.
If hcrc is true, a gzip header CRC is included.
Note that the current versions of the command-line version of
.Xr gzip 1
do not support header CRCs, and will report that it is a
.Dq multi-part gzip file
and give up.
.Pp
If
.Fn deflateSetHeader
is not used, the default gzip header has text false,
the time set to zero, and os set to 255, with no extra, name, or comment
fields.
The gzip header is returned to the default state by
.Fn deflateReset .
.Pp
.Fn deflateSetHeader
returns
.Dv Z_OK
if successful, or
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent.
.It Xo
.Fa int
.Fn inflateInit2 "z_streamp strm" "int windowBits" ;
.Xc
.Pp
This is another version of
.Fn inflateInit
with an extra parameter.
The fields
.Fa next_in ,
.Fa avail_in ,
.Fa zalloc ,
.Fa zfree ,
and
.Fa opaque
must be initialized before by the caller.
.Pp
The
.Fa windowBits
parameter is the base two logarithm of the maximum window size
.Pq the size of the history buffer .
It should be in the range 8..15 for this version of the library.
The default value is 15 if
.Fn inflateInit
is used instead.
.Fa windowBits
must be greater than or equal to the
.Fa windowBits
value provided to
.Fn deflateInit2
while compressing, or it must be equal to 15 if
.Fn deflateInit2
was not used.
If a compressed stream with a larger window size is given as input,
.Fn inflate
will return with the error code
.Dv Z_DATA_ERROR
instead of trying to allocate a larger window.
.Pp
.Fa windowBits
can also be zero to request that inflate use the window size in the zlib header
of the compressed stream.
.Pp
.Fa windowBits
can also be -8..-15 for raw inflate.
In this case, -windowBits determines the window size.
.Fn inflate
will then process raw deflate data, not looking for a zlib or gzip header,
not generating a check value, and not looking for any check values
for comparison at the end of the stream.
This is for use with other formats that use the deflate compressed data format
such as zip.
Those formats provide their own check values.
If a custom format is developed using the raw deflate format
for compressed data, it is recommended that a check value such as an Adler-32
or a CRC-32 be applied to the uncompressed data as is done in the zlib, gzip,
and zip formats.
For most applications, the zlib format should be used as is.
Note that comments above on the use in
.Fn deflateInit2
applies to the magnitude of
.Fa windowBits .
.Pp
.Fa windowBits
can also be greater than 15 for optional gzip decoding.
Add 32 to windowBits to enable zlib and gzip decoding with automatic header
detection, or add 16 to decode only the gzip format
(the zlib format will return a
.Dv Z_DATA_ERROR ) .
If a gzip stream is being decoded,
strm->adler is a CRC-32 instead of an Adler-32.
Unlike the
.Xr gunzip 1
utility and
.Fn gzread
(see below),
.Fn inflate
will not automatically decode concatenated gzip streams.
.Fn inflate
will return
.Dv Z_STREAM_END
at the end of the gzip stream.
The state would need to be reset to continue decoding a subsequent gzip stream.
.Pp
.Fn inflateInit2
returns
.Dv Z_OK
if successful,
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_VERSION_ERROR
if the
.Nm zlib
library version is incompatible with the version assumed by the caller, or
.Dv Z_STREAM_ERROR
if the parameters are invalid, such as a null pointer to the structure.
.Fa msg
is set to null if there is no error message.
.Fn inflateInit2
does not perform any decompression apart from possibly reading the zlib header
if present: actual decompression will be done by
.Fn inflate .
(So
.Fa next_in
and
.Fa avail_in
may be modified, but
.Fa next_out
and
.Fa avail_out
are unused and unchanged.)
The current implementation of
.Fn inflateInit2
does not process any header information \(em that is deferred until
.Fn inflate
is called.
.It Xo
.Fa int
.Fn inflateSetDictionary "z_streamp strm" "const Bytef *dictionary" "uInt dictLength" ;
.Xc
.Pp
Initializes the decompression dictionary from the given uncompressed byte
sequence.
This function must be called immediately after a call to
.Fn inflate
if that call returned
.Dv Z_NEED_DICT .
The dictionary chosen by the compressor can be determined from the
Adler-32 value returned by that call to
.Fn inflate .
The compressor and decompressor must use exactly the same dictionary
(see
.Fn deflateSetDictionary ) .
For raw inflate, this function can be called at any time to set the dictionary.
If the provided dictionary is smaller than the window and there is already
data in the window, then the provided dictionary will amend what's there.
The application must ensure that the dictionary
that was used for compression is provided.
.Pp
.Fn inflateSetDictionary
returns
.Dv Z_OK
if successful,
.Dv Z_STREAM_ERROR
if a parameter is invalid
.Pq e.g. dictionary being NULL
or the stream state is inconsistent,
.Dv Z_DATA_ERROR
if the given dictionary doesn't match the expected one
.Pq incorrect Adler-32 value .
.Fn inflateSetDictionary
does not perform any decompression: this will be done by subsequent calls of
.Fn inflate .
.It Xo
.Fa int
.Fn inflateGetDictionary "z_streamp strm" "Bytef *dictionary" "uInt *dictLength" ;
.Xc
.Pp
Returns the sliding dictionary being maintained by
.Fn inflate .
.Fa dictLength
is set to the number of bytes in the dictionary, and that many bytes are copied
to
.Fa dictionary .
.Fa dictionary
must have enough space, where 32768 bytes is always enough.
If
.Fn inflateGetDictionary
is called with dictionary equal to
.Dv NULL ,
then only the dictionary length is returned, and nothing is copied.
Similary, if
.Fa dictLength is
.Dv NULL ,
then it is not set.
.Pp
.Fn inflateGetDictionary
returns
.Dv Z_OK
on success, or
.Dv Z_STREAM_ERROR
if the stream state is inconsistent.
.It Xo
.Fa int
.Fn inflateSync "z_streamp strm" ;
.Xc
.Pp
Skips invalid compressed data until a possible full flush point
(see above the description of
.Fn deflate
with
.Dv Z_FULL_FLUSH )
can be found, or until all available input is skipped.
No output is provided.
.Pp
.Fn inflateSync
searches for a 00 00 FF FF pattern in the compressed data.
All full flush points have this pattern, but not all occurrences of this
pattern are full flush points.
.Pp
.Fn inflateSync
returns
.Dv Z_OK
if a possible full flush point has been found,
.Dv Z_BUF_ERROR
if no more input was provided,
.Dv Z_DATA_ERROR
if no flush point has been found, or
.Dv Z_STREAM_ERROR
if the stream structure was inconsistent.
In the success case, the application may save the current value of
.Fa total_in
which indicates where valid compressed data was found.
In the error case, the application may repeatedly call
.Fn inflateSync ,
providing more input each time, until success or end of the input data.
.It Xo
.Fa int
.Fn inflateCopy "z_streamp dest" "z_streamp source" ;
.Xc
.Pp
Sets the destination stream as a complete copy of the source stream.
.Pp
This function can be useful when randomly accessing a large stream.
The first pass through the stream can periodically record the inflate state,
allowing restarting inflate at those points when randomly accessing the stream.
.Pp
.Fn inflateCopy
returns
.Dv Z_OK
if success,
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent
(such as
.Fa zalloc
being NULL).
.Fa msg
is left unchanged in both
.Fa source
and
.Fa dest .
.It Xo
.Fa int
.Fn inflateReset "z_streamp strm" ;
.Xc
.Pp
This function is equivalent to
.Fn inflateEnd
followed by
.Fn inflateInit ,
but does not free and reallocate the internal decompression state.
The stream will keep attributes that may have been set by
.Fn inflateInit2 .
.Pp
.Fn inflateReset
returns
.Dv Z_OK
if successful, or
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent
(such as
.Fa zalloc
or
.Fa state
being NULL).
.It Xo
.Fa int
.Fn inflateReset2 "z_streamp strm" "int windowBits" ;
.Xc
.Pp
This function is the same as
.Fn inflateReset ,
but it also permits changing the wrap and window size requests.
The
.Fa windowBits
parameter is interpreted the same as it is for
.Fa inflateInit2 .
If the window size is changed, then the memory allocated for the window
is freed, and the window will be reallocated by
.Fn inflate
if needed.
.Pp
.Fn inflateReset2
returns
.Dv Z_OK
if success, or
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent
(such as
.Fa zalloc
or
.Fa state
being
.Dv NULL ) ,
or if the
.Fa windowBits
parameter is invalid.
.It Xo
.Fa int
.Fn inflatePrime "z_stream strm" "int bits" "int value" ;
.Xc
.Pp
This function inserts bits in the inflate input stream.
The intent is that this function is used
to start inflating at a bit position in the middle of a byte.
The provided bits will be used before any bytes are used from
.Fa next_in .
This function should only be used with raw inflate,
and should be used before the first
.Fn inflate
call after
.Fn inflateInit2
or
.Fn inflateReset .
.Fa bits
must be less than or equal to 16,
and that many of the least significant bits of value
will be inserted in the input.
.Pp
If
.Fa bits
is negative, then the input stream bit buffer is emptied.
Then
.Fn inflatePrime
can be called again to put bits in the buffer.
This is used to clear out bits left over after feeding
.Fn inflate
a block description prior to feeding it codes.
.Pp
.Fn inflatePrime
returns
.Dv Z_OK
if successful, or
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent.
.It Xo
.Fa long
.Fn inflateMark "z_streamp strm" ;
.Xc
.Pp
This function returns two values: one in the lower 16 bits of the return
value, and the other in the remaining upper bits, obtained by shifting the
return value down 16 bits.
If the upper value is -1 and the lower value is zero, then
.Fn inflate
is currently decoding information outside of a block.
If the upper value is -1 and the lower value is non-zero, then
.Fn inflate
is in the middle of a stored block, with the lower value equaling the number of
bytes from the input remaining to copy.
If the upper value is not -1, then it is the number of bits back from
the current bit position in the input of the code
(literal or length/distance pair)
currently being processed.
In that case the lower value is the number of bytes
already emitted for that code.
.Pp
A code is being processed if
.Fn inflate
is waiting for more input to complete decoding of the code,
or if it has completed decoding but is waiting for
more output space to write the literal or match data.
.Pp
.Fn inflateMark
is used to mark locations in the input data for random access,
which may be at bit positions,
and to note those cases where the output of a code may span
boundaries of random access blocks.
The current location in the input stream can be determined from
.Fa avail_in
and
.Fa data_type
as noted in the description for the
.Dv Z_BLOCK
flush parameter for
.Fn inflate .
.Pp
.Fn inflateMark
returns the value noted above,
or -65536 if the provided source stream state was inconsistent.
.It Xo
.Fa int
.Fn inflateGetHeader "z_streamp strm" "gz_headerp head" ;
.Xc
.Pp
.Fn inflateGetHeader
requests that gzip header information be stored in the
provided gz_header structure.
.Fn inflateGetHeader
may be called after
.Fn inflateInit2
or
.Fn inflateReset ,
and before the first call of
.Fn inflate .
As
.Fn inflate
processes the gzip stream, head->done is zero until the header
is completed, at which time head->done is set to one.
If a zlib stream is being decoded,
then head->done is set to -1 to indicate that there will be
no gzip header information forthcoming.
Note that
.Dv Z_BLOCK
or
.Dv Z_TREES
can be used to force
.Fn inflate
to return immediately after header processing is complete
and before any actual data is decompressed.
.Pp
The text, time, xflags, and os fields are filled in with the gzip header
contents.
hcrc is set to true if there is a header CRC.
(The header CRC was valid if done is set to one.)
If extra is not
.Dv NULL ,
then
.Fa extra_max
contains the maximum number of bytes to write to
.Fa extra .
Once done is true,
.Fa extra_len
contains the actual extra field length, and
.Fa extra
contains the extra field, or that field truncated if
.Fa extra_max
is less than
.Fa extra_len .
If name is not
.Dv NULL ,
then up to
.Fa name_max
characters are written there,
terminated with a zero unless the length is greater than
.Fa name_max .
If comment is not
.Dv NULL ,
then up to
.Fa comm_max
characters are written there,
terminated with a zero unless the length is greater than
.Fa comm_max .
When any of extra, name, or comment are not
.Dv NULL
and the respective field is not present in the header,
then that field is set to
.Dv NULL
to signal its absence.
This allows the use of
.Fn deflateSetHeader
with the returned structure to duplicate the header.
However if those fields are set to allocated memory,
then the application will need to save those pointers
elsewhere so that they can be eventually freed.
.Pp
If
.Fn inflateGetHeader
is not used, then the header information is simply discarded.
The header is always checked for validity,
including the header CRC if present.
.Fn inflateReset
will reset the process to discard the header information.
The application would need to call
.Fn inflateGetHeader
again to retrieve the header from the next gzip stream.
.Pp
.Fn inflateGetHeader
returns
.Dv Z_OK
if successful,
or
.Dv Z_STREAM_ERROR
if the source stream state was inconsistent.
.It Xo
.Fa int
.Fn inflateBackInit "z_stream *strm" "int windowBits" "unsigned char FAR *window" ;
.Xc
.Pp
Initialize the internal stream state for decompression using
.Fn inflateBack
calls.
The fields
.Fa zalloc , zfree
and
.Fa opaque
in
.Fa strm
must be initialized before the call.
If
.Fa zalloc
and
.Fa zfree
are
.Dv NULL ,
then the default library-derived memory allocation routines are used.
.Fa windowBits
is the base two logarithm of the window size, in the range 8..15.
.Fa window
is a caller supplied buffer of that size.
Except for special applications where it is assured that
.Fn deflate
was used with small window sizes,
.Fa windowBits
must be 15 and a 32K byte window must be supplied to be able to decompress
general deflate streams.
.Pp
See
.Fn inflateBack
for the usage of these routines.
.Pp
.Fn inflateBackInit
will return
.Dv Z_OK
on success,
.Dv Z_STREAM_ERROR
if any of the parameters are invalid,
.Dv Z_MEM_ERROR
if the internal state could not be allocated, or
.Dv Z_VERSION_ERROR
if the version of the library does not match the version of the header file.
.It Xo
.Fa int
.Fn inflateBack "z_stream *strm" "in_func in" "void FAR *in_desc" "out_func out" "void FAR *out_desc" ;
.Xc
.Pp
.Fn inflateBack
does a raw inflate with a single call using a call-back
interface for input and output.
This is potentially more efficient than
.Fn inflate
for file I/O applications, in that it avoids copying between the output and the
sliding window by simply making the window itself the output buffer.
.Fn inflate
can be faster on modern CPUs when used with large buffers.
.Fn inflateBack
trusts the application to not change the output buffer passed by
the output function, at least until
.Fn inflateBack
returns.
.Pp
.Fn inflateBackInit
must be called first to allocate the internal state
and to initialize the state with the user-provided window buffer.
.Fn inflateBack
may then be used multiple times to inflate a complete, raw
deflate stream with each call.
.Fn inflateBackEnd
is then called to free the allocated state.
.Pp
A raw deflate stream is one with no zlib or gzip header or trailer.
This routine would normally be used in a utility that reads zip or gzip
files and writes out uncompressed files.
The utility would decode the header and process the trailer on its own,
hence this routine expects only the raw deflate stream to decompress.
This is different from the default behavior of
.Fn inflate ,
which expects either a zlib header and trailer around the deflate stream.
.Pp
.Fn inflateBack
uses two subroutines supplied by the caller that are then called by
.Fn inflateBack
for input and output.
.Fn inflateBack
calls those routines until it reads a complete deflate stream and writes out
all of the uncompressed data, or until it encounters an error.
The function's parameters and return types are defined above in the
in_func and out_func typedefs.
.Fn inflateBack
will call in(in_desc, &buf) which should return the
number of bytes of provided input, and a pointer to that input in
.Fa buf .
If there is no input available,
.Fn in
must return zero
\(em buf is ignored in that case \(em
and
.Fn inflateBack
will return a buffer error.
.Fn inflateBack
will call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1].
.Fn out
should return zero on success, or non-zero on failure.
If
.Fn out
returns non-zero,
.Fn inflateBack
will return with an error.
Neither
.Fn in
nor
.Fn out
are permitted to change the contents of the window provided to
.Fn inflateBackInit ,
which is also the buffer that
.Fn out
uses to write from.
The length written by
.Fn out
will be at most the window size.
Any non-zero amount of input may be provided by
.Fn in .
.Pp
For convenience,
.Fn inflateBack
can be provided input on the first call by setting strm->next_in
and strm->avail_in.
If that input is exhausted, then
.Fn in
will be called.
Therefore strm->next_in must be initialized before calling
.Fn inflateBack .
If strm->next_in is
.Dv NULL ,
then
.Fn in
will be called immediately for input.
If strm->next_in is not
.Dv NULL ,
then strm->avail_in must also be initialized,
and then if strm->avail_in is not zero,
input will initially be taken from
strm->next_in[0 .. strm->avail_in \- 1].
.Pp
The
.Fa in_desc
and
.Fa out_desc
parameters of
.Fn inflateBack
are passed as the first parameter of
.Fn in
and
.Fn out ,
respectively, when they are called.
These descriptors can be optionally used to pass any information that the
caller-supplied
.Fn in
and
.Fn out
functions need to do their job.
.Pp
On return,
.Fn inflateBack
will set strm->next_in and strm->avail_in to pass back any unused input
that was provided by the last
.Fn in
call.
The return values of
.Fn inflateBack
can be
.Dv Z_STREAM_END
on success,
.Dv Z_BUF_ERROR
if
.Fn in
or
.Fn out
returned an error,
.Dv Z_DATA_ERROR
if there was a format error in the deflate stream
(in which case strm->msg is set to indicate the nature of the error),
or
.Dv Z_STREAM_ERROR
if the stream was not properly initialized.
In the case of
.Dv Z_BUF_ERROR ,
an input or output error can be distinguished using strm->next_in which
will be
.Dv NULL
only if
.Fn in
returned an error.
If strm->next is not
.Dv NULL ,
then the
.Dv Z_BUF_ERROR
was due to
.Fn out
returning non-zero.
.Po
.Fn in
will always be called before
.Fn out ,
so strm->next_in is assured to be defined if
.Fn out
returns non-zero.
.Pc
Note that
.Fn inflateBack
cannot return
.Dv Z_OK .
.It Xo
.Fa int
.Fn inflateBackEnd "z_stream *strm" ;
.Xc
.Pp
All memory allocated by
.Fn inflateBackInit
is freed.
.Pp
.Fn inflateBackEnd
returns
.Dv Z_OK
on success, or
.Dv Z_STREAM_ERROR
if the stream state was inconsistent.
.It Xo
.Fa uLong
.Fn zlibCompileFlags "void" ;
.Xc
.Pp
This function returns flags indicating compile-time options.
.Pp
Type sizes, two bits each:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 00
16 bits
.It 01
32 bits
.It 10
64 bits
.It 11
other:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 1.0
size of uInt
.It 3.2
size of uLong
.It 5.4
size of voidpf
.Pq pointer
.It 7.6
size of z_off_t
.El
.El
.Pp
Compiler, assembler, and debug options:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 8
ZLIB_DEBUG
.It 9
ASMV or ASMINF \(em use ASM code
.It 10
ZLIB_WINAPI \(em exported functions use the WINAPI calling convention
.It 11
0
.Pq reserved
.El
.Pp
One-time table building
.Pq smaller code, but not thread-safe if true :
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 12
BUILDFIXED \(em build static block decoding tables when needed
.It 13
DYNAMIC_CRC_TABLE \(em build CRC calculation tables when needed
.It 14,15
0
.Pq reserved
.El
.Pp
Library content (indicates missing functionality):
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 16
NO_GZCOMPRESS \(em gz* functions cannot compress
.Pq to avoid linking deflate code when not needed
.It 17
NO_GZIP \(em deflate can't write gzip streams, and inflate can't detect
and decode gzip streams
.Pq to avoid linking CRC code
.It 18-19
0
.Pq reserved
.El
.Pp
Operation variations (changes in library functionality):
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 20
PKZIP_BUG_WORKAROUND \(em slightly more permissive inflate
.It 21
FASTEST \(em deflate algorithm with only one, lowest compression level
.It 22,23
0
.Pq reserved
.El
.Pp
The sprintf variant used by gzprintf
.Pq zero is best :
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 24
0 = vs*, 1 = s* \(em 1 means limited to 20 arguments after the format
.It 25
0 = *nprintf, 1 = *printf \(em 1 means
.Fn gzprintf
not secure!
.It 26
0 = returns value, 1 = void \(em 1 means inferred string length returned
.El
.Pp
Remainder:
.Pp
.Bl -tag -width Ds -offset indent -compact
.It 27-31
0
.Pq reserved
.El
.El
.Sh UTILITY FUNCTIONS
The following utility functions are implemented on top of the
basic stream-oriented functions.
To simplify the interface,
some default options are assumed (compression level and memory usage,
standard memory allocation functions).
The source code of these utility functions can be modified
if you need special options.
.Bl -tag -width Ds
.It Xo
.Fa int
.Fn compress "Bytef *dest" "uLongf *destLen" "const Bytef *source" "uLong sourceLen" ;
.Xc
.Pp
The
.Fn compress
function compresses the source buffer into the destination buffer.
.Fa sourceLen
is the byte length of the source buffer.
Upon entry,
.Fa destLen
is the total size of the destination buffer,
which must be at least the value returned by
.Fn compressBound sourcelen .
Upon exit,
.Fa destLen
is the actual size of the compressed data.
.Fn compress
is equivalent to
.Fn compress2
with a level parameter of
.Dv Z_DEFAULT_COMPRESSION .
.Pp
.Fn compress
returns
.Dv Z_OK
if successful,
.Dv Z_MEM_ERROR
if there was not enough memory, or
.Dv Z_BUF_ERROR
if there was not enough room in the output buffer.
.It Xo
.Fa int
.Fn compress2 "Bytef *dest" "uLongf *destLen" "const Bytef *source" "uLong sourceLen" "int level" ;
.Xc
.Pp
The
.Fn compress2
function compresses the source buffer into the destination buffer.
The
.Fa level
parameter has the same meaning as in
.Fn deflateInit .
.Fa sourceLen
is the byte length of the source buffer.
Upon entry,
.Fa destLen
is the total size of the destination buffer,
which must be at least the value returned by
.Fn compressBound sourceLen .
Upon exit,
.Fa destLen
is the actual size of the compressed buffer.
.Pp
.Fn compress2
returns
.Dv Z_OK
if successful,
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_BUF_ERROR
if there was not enough room in the output buffer, or
.Dv Z_STREAM_ERROR
if the level parameter is invalid.
.It Xo
.Fa uLong
.Fn compressBound "uLong sourceLen" ;
.Xc
.Pp
.Fn compressBound
returns an upper bound on the compressed size after
.Fn compress
or
.Fn compress2
on
.Fa sourceLen
bytes.
It would be used before a
.Fn compress
or
.Fn compress2
call to allocate the destination buffer.
.It Xo
.Fa int
.Fn uncompress "Bytef *dest" "uLongf *destLen" "const Bytef *source" "uLong sourceLen" ;
.Xc
.Pp
The
.Fn uncompress
function decompresses the source buffer into the destination buffer.
.Fa sourceLen
is the byte length of the source buffer.
Upon entry,
.Fa destLen
is the total size of the destination buffer,
which must be large enough to hold the entire uncompressed data.
(The size of the uncompressed data must have been saved previously
by the compressor and transmitted to the decompressor
by some mechanism outside the scope of this compression library.)
Upon exit,
.Fa destLen
is the actual size of the uncompressed data.
This function can be used to decompress a whole file at once if the
input file is mmap'ed.
.Pp
.Fn uncompress
returns
.Dv Z_OK
if successful,
.Dv Z_MEM_ERROR
if there was not enough memory,
.Dv Z_BUF_ERROR
if there was not enough room in the output buffer, or
.Dv Z_DATA_ERROR
if the input data was corrupted or incomplete.
In the case where there is not enough room,
.Fn uncompress
will fill the output buffer with the uncompressed data up to that point.
.It Xo
.Fa int
.Fn uncompress2 "Bytef *dest" "uLongf *destLen" "const Bytef *source" "uLong *sourceLen" ;
.Xc
.Pp
Same as
.Fn uncompress ,
except that
.Fa sourceLen
is a pointer, where the length of the source is
.Fa *sourceLen .
On return,
.Fa *sourceLen
is the number of source bytes consumed.
.It Xo
.Fa gzFile
.Fn gzopen "const char *path" "const char *mode" ;
.Xc
.Pp
This library supports reading and writing files in gzip (.gz) format with
an interface similar to that of stdio, using the functions that start with "gz".
The gzip format is different from the zlib format.
gzip is a gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
.Pp
The
.Fn gzopen
function opens a gzip
.Pq .gz
file for reading or writing.
The mode parameter is as in
.Xr fopen 3
.Po
.Qq rb
or
.Qq wb
.Pc
but can also include a compression level
.Pq "wb9"
or a strategy:
.Sq f
for filtered data, as in
.Qq wb6f ;
.Sq h
for Huffman only compression, as in
.Qq wb1h ,
or
.Sq R
for run-length encoding as in
.Qq wb1R ,
or
.Sq F
for fixed code compression as in
.Qq wb9F .
(See the description of
.Fn deflateInit2
for more information about the strategy parameter.)
.Sq T
will request transparent writing or appending with no compression and not using
the gzip format.
.Pp
.Sq a
can be used instead of
.Sq w
to request that the gzip stream that will be written be appended to the file.
.Sq +
will result in an error,
since reading and writing to the same gzip file is not supported.
The addition of
.Sq x
when writing will create the file exclusively,
which fails if the file already exists.
On systems that support it, the addition of
.Sq e
when reading or writing will set the flag to close the file on an
.Xr execve 2
call.
.Pp
These functions, as well as gzip,
will read and decode a sequence of gzip streams in a file.
The append function of
.Fn gzopen
can be used to create such a file.
(Also see
.Fn gzflush
for another way to do this.)
When appending,
.Fn gzopen
does not test whether the file begins with a gzip stream,
nor does it look for the end of the gzip streams to begin appending.
.Fn gzopen
will simply append a gzip stream to the existing file.
.Pp
.Fn gzopen
can be used to read a file which is not in gzip format;
in this case
.Fn gzread
will directly read from the file without decompression.
When reading, this will be detected automatically
by looking for the magic two-byte gzip header.
.Pp
.Fn gzopen
returns
.Dv NULL
if the file could not be opened,
if there was insufficient memory to allocate the gzFile state,
or if an invalid mode was specified
(an
.Sq r ,
.Sq w ,
or
.Sq a
was not provided, or
.Sq +
was provided).
.Fa errno
can be checked to determine if the reason
.Fn gzopen
failed was that the file could not be opened.
.It Xo
.Fa gzFile
.Fn gzdopen "int fd" "const char *mode" ;
.Xc
.Pp
The
.Fn gzdopen
function associates a gzFile with the file descriptor
.Fa fd .
File descriptors are obtained from calls like
.Xr open 2 ,
.Xr dup 2 ,
.Xr creat 3 ,
.Xr pipe 2 ,
or
.Xr fileno 3
(if the file has been previously opened with
.Xr fopen 3 ) .
The
.Fa mode
parameter is as in
.Fn gzopen .
.Pp
The next call to
.Fn gzclose
on the returned gzFile will also close the file descriptor fd,
just like fclose(fdopen(fd), mode) closes the file descriptor fd.
If you want to keep fd open, use
.Dq fd = dup(fd_keep); gz = gzdopen(fd, mode); .
The duplicated descriptor should be saved to avoid a leak, since
.Fn gzdopen
does not close fd if it fails.
If you are using
.Fn fileno
to get the file descriptor from a FILE *,
then you will have to use
.Xr dup 2
to avoid double-closing the file descriptor.
Both
.Fn gzclose
and
.Fn fclose
will close the associated file descriptor,
so they need to have different file descriptors.
.Pp
.Fn gzdopen
returns NULL if there was insufficient memory to allocate the gzFile state,
if an invalid mode was specified
(an 'r', 'w', or 'a' was not provided, or '+' was provided), or if fd is -1.
The file descriptor is not used until the next gz* read, write, seek,
or close operation, so
.Fn gzdopen
will not detect if fd is invalid (unless fd is -1).
.It Xo
.Fa int
.Fn gzbuffer "gzFile file" "unsigned size" ;
.Xc
.Pp
Set the internal buffer size used by this library's functions.
The default buffer size is 8192 bytes.
This function must be called after
.Fn gzopen
or
.Fn gzdopen ,
and before any other calls that read or write the file.
The buffer memory allocation is always deferred to the first read or write.
Three times that size in buffer space is allocated.
A larger buffer size of, for example, 64K or 128K bytes,
will noticeably increase the speed of decompression (reading).
.Pp
The new buffer size also affects the maximum length for
.Fn gzprintf .
.Pp
.Fn gzbuffer
returns 0 on success, or -1 on failure, such as being called too late.
.It Xo
.Fa int
.Fn gzsetparams "gzFile file" "int level" "int strategy" ;
.Xc
.Pp
The
.Fn gzsetparams
function dynamically updates the compression level or strategy.
See the description of
.Fn deflateInit2
for the meaning of these parameters.
Previously provided data is flushed before the parameter change.
.Pp
.Fn gzsetparams
returns
.Dv Z_OK
if successful,
.Dv Z_STREAM_ERROR
if the file was not opened for writing,
.Dv Z_ERRNO
if there is an error writing the flushed data, or
.Dv Z_MEM_ERROR
if there is a memory allocation error.
.It Xo
.Fa int
.Fn gzread "gzFile file" "voidp buf" "unsigned len" ;
.Xc
.Pp
Reads the given number of uncompressed bytes from the compressed file.
If the input file is not in gzip format,
.Fn gzread
copies the given number ofbytes into the buffer directly from the file.
.Pp
After reaching the end of a gzip stream in the input,
.Fn gzread
will continue to read, looking for another gzip stream.
Any number of gzip streams may be concatenated in the input file,
and will all be decompressed by
.Fn gzread .
If something other than a gzip stream is encountered after a gzip stream,
that remaining trailing garbage is ignored (and no error is returned).
.Pp
.Fn gzread
can be used to read a gzip file that is being concurrently written.
Upon reaching the end of the input,
.Fn gzread
will return with the available data.
If the error code returned by
.Fn gzerror
is
.Dv Z_OK
or
.Dv Z_BUF_ERROR ,
then
.Fn gzclearerr
can be used to clear the end of file indicator in order to permit
.Fn gzread
to be tried again.
.Dv Z_OK
indicates that a gzip stream was completed on the last
.Fn gzread .
.Dv Z_BUF_ERROR
indicates that the input file ended in the middle of a gzip stream.
Note that
.Fn gzread
does not return -1 in the event of an incomplete gzip stream.
This error is deferred until
.Fn gzclose ,
which will return
.Dv Z_BUF_ERROR
if the last
.Fn gzread
ended in the middle of a gzip stream.
Alternatively,
.Fn gzerror
can be used before
.Fn gzclose
to detect this case.
.Pp
.Fn gzread
returns the number of uncompressed bytes actually read,
less than
.Fa len
for end of file, or -1 for error.
If
.Fa len
is too large to fit in an int,
then nothing is read, -1 is returned, and the error state is set to
.Dv Z_STREAM_ERROR .
.It Xo
.Fa z_size_t
.Fn gzfread "voidp buf" "z_size_t size" "z_size_t nitems" "gzFile file" ;
.Xc
.Pp
Read up to
.Fa nitems
items of size
.Fa size
from
.Fa file
to
.Fa buf ,
otherwise operating as
.Fn gzread
does.
This duplicates the interface of stdio's
.Xr fread 3 ,
with size_t request and return types.
If the library defines size_t, then z_size_t is identical to size_t.
If not, then z_size_t is an unsigned integer type that can contain a pointer.
.Pp
.Fn gzfread
returns the number of full items read of size
.Fa size ,
or zero if the end of the file was reached and a full item could not be read,
or if there was an error.
.Fn gzerror
must be consulted if zero is returned in order to determine
if there was an error.
If the multiplication of
.Fa size
and
.Fa nitems
overflows, i.e. the product does not fit in a z_size_t, then nothing is read,
zero is returned, and the error state is set to
.Dv Z_STREAM_ERROR .
.Pp
In the event that the end of file is reached and only a partial item is
available at the end, i.e. the remaining uncompressed data length is not a
multiple of size, then the final partial item is nevetheless read into
.Fa buf
and the end-of-file flag is set.
The length of the partial item read is not provided,
but could be inferred from the result of
.Fn gztell .
This behavior is the same as the behavior of
.Xr fread 3
implementations in common libraries,
but it prevents the direct use of
.Fn gzfread
to read a concurrently written file, resetting and retrying on end-of-file,
when size is not 1.
.It Xo
.Fa int
.Fn gzwrite "gzFile file" "voidpc buf" "unsigned len" ;
.Xc
.Pp
The
.Fn gzwrite
function writes the given number of uncompressed bytes into the compressed file.
.Fn gzwrite
returns the number of uncompressed bytes written or 0 in case of error.
.It Xo
.Fa z_size_t
.Fn gzfwrite "voidpc buf" "z_size_t size" "z_size_t nitems" "gzFile file" ;
.Xc
.Pp
.Fn gzfwrite
writes
.Fa nitems
items of size
.Fa size
from
.Fa buf
to
.Fa file ,
duplicating the interface of stdio's
.Xr fwrite 3 ,
with size_t request and return types.
If the library defines size_t, then z_size_t is identical to size_t.
If not, then z_size_t is an unsigned integer type that can contain a pointer.
.Pp
.Fn gzfwrite
returns the number of full items written of size
.Fa size ,
or zero if there was an error.
If the multiplication of
.Fa size
and
.Fa nitems
overflows,
i.e. the product does not fit in a z_size_t, then nothing is written,
zero is returned, and the error state is set to
.Dv Z_STREAM_ERROR .
.It Xo
.Fa int
.Fn gzprintf "gzFile file" "const char *format" "..." ;
.Xc
.Pp
The
.Fn gzprintf
function converts, formats, and writes the args to the compressed file
under control of the format string, as in
.Xr fprintf 3 .
.Fn gzprintf
returns the number of uncompressed bytes actually written,
or a negative zlib error code in case of error.
The number of uncompressed bytes written is limited to 8191,
or one less than the buffer size given to
.Fn gzbuffer .
The caller should ensure that this limit is not exceeded.
If it is exceeded, then
.Fn gzprintf
will return an error
.Pq 0
with nothing written.
In this case, there may also be a buffer overflow
with unpredictable consequences, which is possible only if
.Nm zlib
was compiled with the insecure functions
.Fn sprintf
or
.Fn vsprintf
because the secure
.Fn snprintf
or
.Fn vsnprintf
functions were not available.
This can be determined using
.Fn zlibCompileFlags .
.It Xo
.Fa int
.Fn gzputs "gzFile file" "const char *s" ;
.Xc
.Pp
The
.Fn gzputs
function writes the given NUL-terminated string to the compressed file,
excluding the terminating NUL character.
.Pp
.Fn gzputs
returns the number of characters written, or -1 in case of error.
.It Xo
.Fa char *
.Fn gzgets "gzFile file" "char *buf" "int len" ;
.Xc
.Pp
The
.Fn gzgets
function reads bytes from the compressed file until len-1 characters are read,
or a newline character is read and transferred to
.Fa buf ,
or an end-of-file condition is encountered.
If any characters are read or if len == 1,
the string is terminated with a NUL character.
If no characters are read due to an end-of-file or len < 1,
then the buffer is left untouched.
.Pp
.Fn gzgets
returns
.Fa buf ,
which is a NUL-terminated string, or it returns
.Dv NULL
for end-of-file or in case of error.
If there was an error, the contents at
.Fa buf
are indeterminate.
.Pp
.Fn gzgets
returns
.Fa buf ,
or
.Dv NULL
in case of error.
.It Xo
.Fa int
.Fn gzputc "gzFile file" "int c" ;
.Xc
.Pp
The
.Fn gzputc
function writes
.Fa c ,
converted to an unsigned char, into the compressed file.
.Fn gzputc
returns the value that was written, or -1 in case of error.
.It Xo
.Fa int
.Fn gzgetc "gzFile file" ;
.Xc
.Pp
The
.Fn gzgetc
function reads one byte from the compressed file.
.Fn gzgetc
returns this byte or -1 in case of end of file or error.
This is implemented as a macro for speed.
As such, it does not do all of the checking the other functions do.
That is, it does not check to see if file is
.Dv NULL ,
nor whether the structure
.Fa file
points to has been clobbered or not.
.It Xo
.Fa int
.Fn gzungetc "int c" "gzFile file" ;
.Xc
.Pp
Push one character back onto the stream to be read as the first character
on the next read.
At least one character of push-back is allowed.
.Fn gzungetc
returns the character pushed, or -1 on failure.
.Fn gzungetc
will fail if c is -1,
and may fail if a character has been pushed but not read yet.
If
.Fn gzungetc
is used immediately after
.Fn gzopen
or
.Fn gzdopen ,
at least the output buffer size of pushed characters is allowed.
(See
.Fn gzbuffer
above.)
The pushed character will be discarded if the stream is repositioned with
.Fn gzseek
or
.Fn gzrewind .
.It Xo
.Fa int
.Fn gzflush "gzFile file" "int flush" ;
.Xc
.Pp
The
.Fn gzflush
function flushes all pending output into the compressed file.
The parameter
.Fa flush
is as in the
.Fn deflate
function.
The return value is the
.Nm zlib
error number (see function
.Fn gzerror
below).
.Fn gzflush
is only permitted when writing.
.Pp
If the flush parameter is
.Dv Z_FINISH ,
the remaining data is written and the gzip stream is completed in the output.
If
.Fn gzwrite
is called again, a new gzip stream will be started in the output.
.Fn gzread
is able to read such concatenated gzip streams.
.Pp
.Fn gzflush
should be called only when strictly necessary because it will
degrade compression if called too often.
.It Xo
.Fa z_off_t
.Fn gzseek "gzFile file" "z_off_t offset" "int whence" ;
.Xc
.Pp
Sets the starting position for the next
.Fn gzread
or
.Fn gzwrite
on the given compressed file.
The offset represents a number of bytes in the uncompressed data stream.
The whence parameter is defined as in
.Xr lseek 2 ;
the value
.Dv SEEK_END
is not supported.
.Pp
If the file is opened for reading, this function is emulated but can be
extremely slow.
If the file is opened for writing, only forward seeks are supported;
.Fn gzseek
then compresses a sequence of zeroes up to the new starting position.
.Pp
.Fn gzseek
returns the resulting offset location as measured in bytes from
the beginning of the uncompressed stream, or -1 in case of error,
in particular if the file is opened for writing and the new starting position
would be before the current position.
.It Xo
.Fa int
.Fn gzrewind "gzFile file" ;
.Xc
.Pp
The
.Fn gzrewind
function rewinds the given
.Fa file .
This function is supported only for reading.
.Pp
gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET).
.It Xo
.Fa z_off_t
.Fn gztell "gzFile file" ;
.Xc
.Pp
The
.Fn gztell
function returns the starting position for the next
.Fn gzread
or
.Fn gzwrite
on the given compressed file.
This position represents a number of bytes in the uncompressed data stream,
and is zero when starting,
even if appending or reading a gzip stream from the middle of a file using
.Fn gzdopen .
.Pp
gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR).
.It Xo
.Fa int
.Fn gzeoffset "gzFile file" ;
.Xc
.Pp
Returns the current offset in the file being read or written.
This offset includes the count of bytes that precede the gzip stream,
for example when appending or when using
.Fn gzdopen
for reading.
When reading, the offset does not include as yet unused buffered input.
This information can be used for a progress indicator.
On error,
.Fn gzoffset
returns -1.
.It Xo
.Fa int
.Fn gzeof "gzFile file" ;
.Xc
.Pp
Returns true (1) if the end-of-file indicator has been set while reading,
false (0) otherwise.
Note that the end-of-file indicator is set only if the
read tried to go past the end of the input, but came up short.
Therefore just like
.Xr feof 3 ,
.Fn gzeof
may return false even if there is no more data to read,
in the event that the last read request was for the exact number of
bytes remaining in the input file.
This will happen if the input file size is an exact multiple of the buffer size.
.Pp
If
.Fn gzeof
returns true, then the read functions will return no more data,
unless the end-of-file indicator is reset by
.Fn gzclearerr
and the input file has grown since the previous end of file was detected.
.It Xo
.Fa int
.Fn gzdirect "gzFile file" ;
.Xc
.Pp
Returns true (1) if
.Fa file
is being copied directly while reading,
or false (0) if
.Fa file
is a gzip stream being decompressed.
.Pp
If the input file is empty,
.Fn gzdirect
will return true, since the input does not contain a gzip stream.
.Pp
If
.Fn gzdirect
is used immediately after
.Fn gzopen
or
.Fn gzdopen ,
it will cause buffers to be allocated to allow reading the file
to determine if it is a gzip file.
Therefore if
.Fn gzbuffer
is used, it should be called before
.Fn gzdirect .
.Pp
When writing,
.Fn gzdirect
returns true (1) if transparent writing was requested
("wT" for the
.Fn gzopen
mode),
or false (0) otherwise.
(Note:
.Fn gzdirect
is not needed when writing.
Transparent writing must be explicitly requested,
so the application already knows the answer.
When linking statically, using
.Fn gzdirect
will include all of the zlib code for gzip file reading and decompression,
which may not be desired.)
.It Xo
.Fa int
.Fn gzclose "gzFile file" ;
.Xc
.Pp
Flushes all pending output if necessary, closes the compressed file and
deallocates the (de)compression state.
Note that once file is closed, you cannot call
.Fn gzerror
with
.Fa file ,
since its structures have been deallocated.
.Fn gzclose
must not be called more than once on the same file,
just as
.Xr free 3
must not be called more than once on the same allocation.
.Pp
.Fn gzclose
will return
.Dv Z_STREAM_ERROR
if
.Fa file
is not valid,
.Dv Z_ERRNO
on a file operation error,
.Dv Z_MEM_ERROR
if out of memory,
.Dv Z_BUF_ERROR
if the last read ended in the middle of a gzip stream, or
.Dv Z_OK
on success.
.It Xo
.Fa int
.Fn gzclose_r "gzFile file" ;
.Xc
.It Xo
.Fa int
.Fn gzclose_w "gzFile file" ;
.Xc
.Pp
Same as
.Fn gzclose ,
but
.Fn gzclose_r
is only for use when reading, and
.Fn gzclose_w
is only for use when writing or appending.
The advantage to using these instead of
.Fn gzclose
is that they avoid linking in zlib compression or decompression code
that is not used when only reading or only writing, respectively.
If
.Fn gzclose
is used, then both compression and decompression code will be included
in the application when linking to a static zlib library.
.It Xo
.Fa const char *
.Fn gzerror "gzFile file" "int *errnum" ;
.Xc
.Pp
The
.Fn gzerror
function returns the error message for the last error which occurred on the
given compressed
.Fa file .
.Fa errnum
is set to the
.Nm zlib
error number.
If an error occurred in the file system and not in the compression library,
.Fa errnum
is set to
.Dv Z_ERRNO
and the application may consult errno to get the exact error code.
.Pp
The application must not modify the returned string.
Future calls to this function may invalidate the previously returned string.
If
.Ar file
is closed, then the string previously returned by
.Fn gzerror
will no longer be available.
.Pp
.Fn gzerror
should be used to distinguish errors from end-of-file for those
functions above that do not distinguish those cases in their return values.
.It Xo
.Fa void
.Fn gzclearerr "gzFile file" ;
.Xc
Clears the error and end-of-file flags for
.Fa file .
This is analogous to the
.Fn clearerr
function in stdio.
This is useful for continuing to read a gzip file
that is being written concurrently.
.El
.Sh CHECKSUM FUNCTIONS
These functions are not related to compression but are exported
anyway because they might be useful in applications using the
compression library.
.Bl -tag -width Ds
.It Xo
.Fa uLong
.Fn adler32 "uLong adler" "const Bytef *buf" "uInt len" ;
.Xc
The
.Fn adler32
function updates a running Adler-32 checksum with the bytes buf[0..len-1]
and returns the updated checksum.
If
.Fa buf
is
.Dv NULL ,
this function returns the required initial value for the checksum.
.Pp
An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed
much faster.
Usage example:
.Bd -unfilled -offset indent
uLong adler = adler32(0L, NULL, 0);

while (read_buffer(buffer, length) != EOF) {
adler = adler32(adler, buffer, length);
}
if (adler != original_adler) error();
.Ed
.It Xo
.Fa uLong
.Fn adler32_z "uLong adler" "const Bytef *buf" "z_size_t len" ;
.Xc
.Pp
The same as
.Fn adler32 ,
but with a size_t length.
.It Xo
.Fa uLong
.Fn adler32_combine "uLong adler1" "uLong adler2" "z_off_t len2" ;
.Xc
.Pp
The
.Fn adler32_combine
function combines two Adler-32 checksums into one.
For two sequences of bytes, seq1 and seq2 with lengths len1 and len2,
Adler-32 checksums are calculated for each, adler1 and adler2.
.Fn adler32_combine
returns the Adler-32 checksum of seq1 and seq2 concatenated,
requiring only adler1, adler2, and len2.
Note that the z_off_t type (like off_t) is a signed integer.
If
.Ar len2
is negative, the result has no meaning or utility.
.It Xo
.Fa uLong
.Fn crc32 "uLong crc" "const Bytef *buf" "uInt len" ;
.Xc
.Pp
The
.Fn crc32
function updates a running CRC-32 with the bytes buf[0..len-1]
and returns the updated CRC-32.
If
.Fa buf
is
.Dv NULL ,
this function returns the required initial value for the CRC.
Pre- and post-conditioning
.Pq one's complement
is performed within this function so it shouldn't be done by the application.
Usage example:
.Bd -unfilled -offset indent
uLong crc = crc32(0L, NULL, 0);

while (read_buffer(buffer, length) != EOF) {
crc = crc32(crc, buffer, length);
}
if (crc != original_crc) error();
.Ed
.It Xo
.Fa uLong
.Fn crc32_z "uLong adler "const Bytef *buf" "z_size_t len" ;
.Xc
.Pp
The same as
.Fn crc32 ,
but with a size_t length.
.It Xo
.Fa uLong
.Fn crc32_combine "uLong crc1" "uLong crc2" "z_off_t len2" ;
.Xc
.Pp
The
.Fn crc32_combine
function combines two CRC-32 check values into one.
For two sequences of bytes,
seq1 and seq2 with lengths len1 and len2,
CRC-32 check values are calculated for each, crc1 and crc2.
.Fn crc32_combine
returns the CRC-32 check value of seq1 and seq2 concatenated,
requiring only crc1, crc2, and len2.
.El
.Sh STRUCTURES
.Bd -unfilled
struct internal_state;

typedef struct z_stream_s {
    Bytef    *next_in;  /* next input byte */
    uInt     avail_in;  /* number of bytes available at next_in */
    off_t    total_in;  /* total number of input bytes read so far */

    Bytef    *next_out; /* next output byte will go here */
    uInt     avail_out; /* remaining free space at next_out */
    off_t    total_out; /* total number of bytes output so far */

    char     *msg;      /* last error message, NULL if no error */
    struct internal_state FAR *state; /* not visible by applications */

    alloc_func zalloc;  /* used to allocate the internal state */
    free_func  zfree;   /* used to free the internal state */
    voidpf     opaque;  /* private data object passed to zalloc and zfree*/

    int     data_type;  /* best guess about the data type: binary or text
                           for deflate, or the decoding state for inflate */
    uLong   adler;      /* Adler-32 or CRC-32 value of the uncompressed data */
    uLong   reserved;   /* reserved for future use */
} z_stream;

typedef z_stream FAR * z_streamp;
.Ed
.Bd -unfilled
/*
     gzip header information passed to and from zlib routines.
  See RFC 1952 for more details on the meanings of these fields.
*/
typedef struct gz_header_s {
    int     text;       /* true if compressed data believed to be text */
    uLong   time;       /* modification time */
    int     xflags;     /*extra flags (not used when writing a gzip file)*/
    int     os;         /* operating system */
    Bytef   *extra;     /* pointer to extra field or NULL if none */
    uInt    extra_len;  /* extra field length (valid if extra != NULL) */
    uInt    extra_max;  /* space at extra (only when reading header) */
    Bytef   *name;      /* pointer to zero-terminated file name or NULL*/
    uInt    name_max;   /* space at name (only when reading header) */
    Bytef   *comment;   /* pointer to zero-terminated comment or NULL */
    uInt    comm_max;   /* space at comment (only when reading header) */
    int     hcrc;       /* true if there was or will be a header crc */
    int     done;       /* true when done reading gzip header (not used
                           when writing a gzip file) */
} gz_header;

typedef gz_header FAR *gz_headerp;
.Ed
.Pp
The application must update
.Fa next_in
and
.Fa avail_in
when
.Fa avail_in
has dropped to zero.
It must update
.Fa next_out
and
.Fa avail_out
when
.Fa avail_out
has dropped to zero.
The application must initialize
.Fa zalloc ,
.Fa zfree ,
and
.Fa opaque
before calling the init function.
All other fields are set by the compression library
and must not be updated by the application.
.Pp
The
.Fa opaque
value provided by the application will be passed as the first
parameter for calls to
.Fn zalloc
and
.Fn zfree .
This can be useful for custom memory management.
The compression library attaches no meaning to the
.Fa opaque
value.
.Pp
.Fa zalloc
must return
.Dv NULL
if there is not enough memory for the object.
If
.Nm zlib
is used in a multi-threaded application,
.Fa zalloc
and
.Fa zfree
must be thread safe.
In that case,
.Nm zlib
is thread-safe.
When
.Fa zalloc
and
.Fa zfree
are
.Dv NULL
on entry to the initialization function,
they are set to internal routines that use the standard library functions
.Xr malloc 3
and
.Xr free 3 .
.Pp
On 16-bit systems, the functions
.Fa zalloc
and
.Fa zfree
must be able to allocate exactly 65536 bytes,
but will not be required to allocate more than this if the symbol MAXSEG_64K
is defined (see
.In zconf.h ) .
.Pp
WARNING: On MSDOS, pointers returned by
.Fa zalloc
for objects of exactly 65536 bytes *must* have their offset normalized to zero.
The default allocation function provided by this library ensures this (see
.Pa zutil.c ) .
To reduce memory requirements and avoid any allocation of 64K objects,
at the expense of compression ratio,
compile the library with -DMAX_WBITS=14 (see
.In zconf.h ) .
.Pp
The fields
.Fa total_in
and
.Fa total_out
can be used for statistics or progress reports.
After compression,
.Fa total_in
holds the total size of the uncompressed data and may be saved for use
in the decompressor
(particularly if the decompressor wants to decompress everything
in a single step).
.Sh CONSTANTS
.Bd -unfilled
#define Z_NO_FLUSH      0
#define Z_PARTIAL_FLUSH 1
#define Z_SYNC_FLUSH    2
#define Z_FULL_FLUSH    3
#define Z_FINISH        4
#define Z_BLOCK         5
#define Z_TREES         6
/* Allowed flush values; see deflate() and inflate() below for details */

#define Z_OK            0
#define Z_STREAM_END    1
#define Z_NEED_DICT     2
#define Z_ERRNO        (-1)
#define Z_STREAM_ERROR (-2)
#define Z_DATA_ERROR   (-3)
#define Z_MEM_ERROR    (-4)
#define Z_BUF_ERROR    (-5)
#define Z_VERSION_ERROR (-6)
/* Return codes for the compression/decompression functions.
 * Negative values are errors,
 * positive values are used for special but normal events.
 */

#define Z_NO_COMPRESSION         0
#define Z_BEST_SPEED             1
#define Z_BEST_COMPRESSION       9
#define Z_DEFAULT_COMPRESSION  (-1)
/* compression levels */

#define Z_FILTERED            1
#define Z_HUFFMAN_ONLY        2
#define Z_RLE                 3
#define Z_FIXED               4
#define Z_DEFAULT_STRATEGY    0
/* compression strategy; see deflateInit2() below for details */

#define Z_BINARY   0
#define Z_TEXT     1
#define Z_ASCII    Z_TEXT /* for compatibility with 1.2.2 and earlier */
#define Z_UNKNOWN  2
/* Possible values of the data_type field for deflate() */

#define Z_DEFLATED   8
/* The deflate compression method
 * (the only one supported in this version)
*/

#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */

#define zlib_version zlibVersion()
/* for compatibility with versions < 1.0.2 */
.Ed
.Sh VARIOUS HACKS
deflateInit and inflateInit are macros to allow checking the
.Nm zlib
version and the compiler's view of
.Fa z_stream .
.Bl -tag -width Ds
.It Xo
.Fa int
.Fn deflateInit_ "z_stream strm" "int level" "const char *version" "int stream_size" ;
.Xc
.It Xo
.Fa int
.Fn inflateInit_ "z_stream strm" "const char *version" "int stream_size" ;
.Xc
.It Xo
.Fa int
.Fo deflateInit2_
.Fa "z_stream strm"
.Fa "int level"
.Fa "int method"
.Fa "int windowBits"
.Fa "int memLevel"
.Fa "int strategy"
.Fa "const char *version"
.Fa "int stream_size"
.Fc ;
.Xc
.It Xo
.Fa int
.Fn inflateInit2_ "z_stream strm" "int windowBits" "const char *version" "int stream_size" ;
.Xc
.It Xo
.Fa int
.Fn inflateBackInit_ "z_stream *strm" "int windowBits" "unsigned char FAR *window" "const char *version" "int stream_size" ;
.Xc
.It Xo
.Fa const char *
.Fn zError "int err" ;
.Xc
.It Xo
.Fa int
.Fn inflateSyncPoint "z_streamp z" ;
.Xc
.It Xo
.Fa const uLongf *
.Fn "get_crc_table" "void" ;
.Xc
.El
.Sh SEE ALSO
.Xr compress 1 ,
.Xr gzip 1
.Sh STANDARDS
.Rs
.%A P. Deutsch
.%A J-L. Gailly
.%D May 1996
.%R RFC 1950
.%T ZLIB Compressed Data Format Specification version 3.3
.Re
.Pp
.Rs
.%A P. Deutsch
.%D May 1996
.%R RFC 1951
.%T DEFLATE Compressed Data Format Specification version 1.3
.Re
.Pp
.Rs
.%A P. Deutsch
.%D May 1996
.%R RFC 1952
.%T GZIP file format specification version 4.3
.Re
.Sh HISTORY
This manual page is based on an HTML version of
.In zlib.h
converted by
.An piaip Aq Mt piaip@csie.ntu.edu.tw
and was converted to mdoc format by the
.Ox
project.
.Sh AUTHORS
.An Jean-loup Gailly Aq Mt jloup@gzip.org
.An Mark Adler Aq Mt madler@alumni.caltech.edu