Installation Instructions ========================= This post will guide you step-by-step in order to install Carbs Linux. It is not complete yet. Downloading and Getting Ready to Chroot --------------------------------------- Installing Carbs Linux is the same as installing most rootfs distributions, such as Gentoo, or Void Linux. ### Requirements You simply need a Live Linux ISO. Gentoo would be the best as programs you will require will be already there. Get the ISO, boot it and set up your network. **Required Programs:** * tar * wget * xz Rest of the instructions assume that you have set all of these up, and will continue on. ### Download First, we need to download the rootfs tarball. In your terminal type $ wget https://carbslinux.org/releases/carbs-rootfs-20191210.tar.xz ### Check the integrity of the tarball While optional, it is highly recommended to check the integrity of the tarball. $ wget https://carbslinux.org/releases/carbs-rootfs-20191210.tar.xz.sha256sum $ sha256sum -c carbs-rootfs-20191210.tar.xz.sha256sum ### Check the signatures While optional, it is highly recommended to check the signature of the tarball $ wget https://carbslinux.org/releases/carbs-rootfs-20191210.tar.xz.sig Import the public key of release@carbslinux.org $ gpg --recv-keys FF484BDFEFCEF8FF $ gpg --verify carbs-rootfs-20191210.tar.xz.sig ### Download Kiss Linux Chroot Helper $ wget https://dl.getkiss.org/kiss-chroot Make the script executable $ chmod +x kiss-chroot ### Extract the rootfs tarball You need to extract the tarball to your mounted partition $ tar xvpf carbs-rootfs-20191210.tar.xz -C /mnt Chroot ------ Chroot into Carbs Linux $ ./kiss-chroot /mnt ### Enable repository signing (Highly Recommended) This step is optional, but very highly recommended (I cannot stress out the amount I am recommending this). This ensures you are receiving updates from Carbs Linux and not some other source. **Install GnuPG** It is also a great time to learn how to use your new package manager, KISS! You simply build and install the package $ kiss build gnupg1 $ kiss install gnupg1 **Import my key** Import my public key (cem@ckyln.com) $ gpg --recv-key 4356EE08A364CE09 Create a .gnupg directory if it doesn't exist $ mkdir -p /root/.gnupg Trust my public key $ echo trusted-key 0x4356ee08a364ce09 >> /root/.gnupg/gpg.conf **Enable signature verification** Git has a built in signature verification feature. You can go to the repository directory and enable it $ cd /var/db/kiss/repo $ git config merge.verifySignatures true ### Installing Important Tools Since Carbs gives you one of the most minimal base, you might need to apply some add-ons to your system. **Update packages** It might be a good idea to update your packages before installing new packages. This ensure compatibility. $ kiss update **Filesystems** Currently, e2fsprogs and dosfstools are supported, as they are the most-used filesystems. Support for ext2, ext3, and ex4 $ kiss build e2fsprogs $ kiss install e2fsprogs Support for dosfstools $ kiss build dosfstools $ kiss install dosfstools **Device management** $ kiss build eudev $ kiss install eudev **Wireless** **wpa_supplicant** $ kiss build wpa_supplicant $ kiss install wpa_supplicant **eiwd (WIP)** $ kiss build eiwd $ kiss install eiwd **dhcpcd** $ kiss build dhcpcd $ kiss install dhcpcd **Shells** Carbs Linux comes preinstalled with busybox ash, but other shells can be found on the repository Install bash $ kiss build bash $ kiss install bash Install zsh $ kiss build zsh $ kiss install zsh Install Plan9 rc-shell $ kiss build 9base $ kiss install 9base ### Install the Kernel Next step is installing the kernel, which might sound as a challenge you should download and extract the kernel tarball first. $ wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.5.tar.xz Let's move the sources to /usr/src $ mv linux-5.5.tar.xz /usr/src $ tar xf linux-5.5.tar.xz $ cd linux-5.5 **Configure the Kernel** You can check to learn more about kernel configuration. Overall, [Gentoo Wiki](https://wiki.gentoo.org) is a good place to learn about kernel configuration related to your hardware. **Build and install the kernel** The rest of it is simple, build the kernel with `make` and install it with `make install` ### Bootloader The default bootloader is GRUB (GRand Unified Bootloader). Build and install GRUB $ kiss b grub $ kiss i grub Install efibootmgr as well if your system requires it $ kiss b efibootmgr $ kiss i efibootmgr **Setup GRUB** For BIOS: $ grub-install --target=i386-pc /dev/sdX For UEFI: $ grub-install --target=x86_64-efi --efi-directory=esp --bootloader-id=CarbsLinux $ grub-mkconfig -o /boot/grub/grub.cfg ### Install init Currently, default init for Carbs Linux is `sinit`, but busybox-init is also supported. You can also change this yourself. To install init, you have to $ kiss b sinit $ kiss i sinit This will also fetch busybox-init as its dependency. ### Enabling other repositories There are other repositories out there that might be of your interest. The Official Repositories come with community and testing repositories that are not enabled by default. You could also want to add the Kiss Linux community repository, or someone's personal kiss repository. **Obtaining repositories** Obtaining a repository is as simple as a git clone. You can do it with Cem's personal repository as an example, but any other repository will be the same. # Clone the repository to your desired location # Optionally add "--depth 1" to save precious disk space $ git clone --depth 1 git://git.ckyln.com/kiss-repository /var/db/kiss/cem-repository That's it, you have obtained a new repository! Adding a repository to your KISS_PATH Now that we have obtained Cem's repository, we can add it to our KISS\_PATH! We need to edit `/etc/profile.d/kiss_path.sh` for this, but you can also change your KISS\_PATH from your shellrc. Add the full path to the repository, in this case `/var/db/kiss/cem-repository/cem` to the variable and add a `:` before/after it. It must be looking like this. export KISS_PATH=/var/db/kiss/repo/core:/var/db/kiss/repo/extra:/var/db/kiss/repo/xorg:/var/db/kiss/cem-repository/cem Update your shell variables by doing `. /etc/profile.d/kiss_path.sh` so you can immediately access the repository packages More ---- You should now be able to boot into you Carbs Linux installation. To learn more, you can visit the [wiki](//carbslinux.org/wiki)