config: deindent all help texts

Those two spaces after tab have no effect, and always a nuisance when editing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

1 files changed, 309 insertions, 309 deletions

diff --git a/Config.in b/Config.in
index cf72287be..c1cc591f3 100644
--- a/Config.in
+++ b/Config.in
@@ -15,314 +15,314 @@ config DESKTOP
 	bool "Enable compatibility for full-blown desktop systems"
 	default y
 	help
-	  Enable applet options and features which are not essential.
-	  Many applet options have dedicated config options to (de)select them
-	  under that applet; this options enables those options which have no
-	  individual config item for them.
+	Enable applet options and features which are not essential.
+	Many applet options have dedicated config options to (de)select them
+	under that applet; this options enables those options which have no
+	individual config item for them.
 
-	  Select this if you plan to use busybox on full-blown desktop machine
-	  with common Linux distro, which needs higher level of command-line
-	  compatibility.
+	Select this if you plan to use busybox on full-blown desktop machine
+	with common Linux distro, which needs higher level of command-line
+	compatibility.
 
-	  If you are preparing your build to be used on an embedded box
-	  where you have tighter control over the entire set of userspace
-	  tools, you can unselect this option for smaller code size.
+	If you are preparing your build to be used on an embedded box
+	where you have tighter control over the entire set of userspace
+	tools, you can unselect this option for smaller code size.
 
 config EXTRA_COMPAT
 	bool "Provide compatible behavior for rare corner cases (bigger code)"
 	default n
 	help
-	  This option makes grep, sed etc handle rare corner cases
-	  (embedded NUL bytes and such). This makes code bigger and uses
-	  some GNU extensions in libc. You probably only need this option
-	  if you plan to run busybox on desktop.
+	This option makes grep, sed etc handle rare corner cases
+	(embedded NUL bytes and such). This makes code bigger and uses
+	some GNU extensions in libc. You probably only need this option
+	if you plan to run busybox on desktop.
 
 config INCLUDE_SUSv2
 	bool "Enable obsolete features removed before SUSv3"
 	default y
 	help
-	  This option will enable backwards compatibility with SuSv2,
-	  specifically, old-style numeric options ('command -1 <file>')
-	  will be supported in head, tail, and fold. (Note: should
-	  affect renice too.)
+	This option will enable backwards compatibility with SuSv2,
+	specifically, old-style numeric options ('command -1 <file>')
+	will be supported in head, tail, and fold. (Note: should
+	affect renice too.)
 
 config LONG_OPTS
 	bool "Support --long-options"
 	default y
 	help
-	  Enable this if you want busybox applets to use the gnu --long-option
-	  style, in addition to single character -a -b -c style options.
+	Enable this if you want busybox applets to use the gnu --long-option
+	style, in addition to single character -a -b -c style options.
 
 config SHOW_USAGE
 	bool "Show applet usage messages"
 	default y
 	help
-	  Enabling this option, BusyBox applets will show terse help messages
-	  when invoked with wrong arguments.
-	  If you do not want to show any (helpful) usage message when
-	  issuing wrong command syntax, you can say 'N' here,
-	  saving approximately 7k.
+	Enabling this option, BusyBox applets will show terse help messages
+	when invoked with wrong arguments.
+	If you do not want to show any (helpful) usage message when
+	issuing wrong command syntax, you can say 'N' here,
+	saving approximately 7k.
 
 config FEATURE_VERBOSE_USAGE
 	bool "Show verbose applet usage messages"
 	default y
 	depends on SHOW_USAGE
 	help
-	  All BusyBox applets will show verbose help messages when
-	  busybox is invoked with --help. This will add a lot of text to the
-	  busybox binary. In the default configuration, this will add about
-	  13k, but it can add much more depending on your configuration.
+	All BusyBox applets will show verbose help messages when
+	busybox is invoked with --help. This will add a lot of text to the
+	busybox binary. In the default configuration, this will add about
+	13k, but it can add much more depending on your configuration.
 
 config FEATURE_COMPRESS_USAGE
 	bool "Store applet usage messages in compressed form"
 	default y
 	depends on SHOW_USAGE
 	help
-	  Store usage messages in .bz compressed form, uncompress them
-	  on-the-fly when <applet> --help is called.
+	Store usage messages in .bz compressed form, uncompress them
+	on-the-fly when <applet> --help is called.
 
-	  If you have a really tiny busybox with few applets enabled (and
-	  bunzip2 isn't one of them), the overhead of the decompressor might
-	  be noticeable. Also, if you run executables directly from ROM
-	  and have very little memory, this might not be a win. Otherwise,
-	  you probably want this.
+	If you have a really tiny busybox with few applets enabled (and
+	bunzip2 isn't one of them), the overhead of the decompressor might
+	be noticeable. Also, if you run executables directly from ROM
+	and have very little memory, this might not be a win. Otherwise,
+	you probably want this.
 
 config LFS
 	bool "Support files > 2 GB"
 	default y
 	help
-	  If you want to build BusyBox with large file support, then enable
-	  this option. This will have no effect if your kernel or your C
-	  library lacks large file support for large files. Some of the
-	  programs that can benefit from large file support include dd, gzip,
-	  cp, mount, tar, and many others. If you want to access files larger
-	  than 2 Gigabytes, enable this option.
+	If you want to build BusyBox with large file support, then enable
+	this option. This will have no effect if your kernel or your C
+	library lacks large file support for large files. Some of the
+	programs that can benefit from large file support include dd, gzip,
+	cp, mount, tar, and many others. If you want to access files larger
+	than 2 Gigabytes, enable this option.
 
 config PAM
 	bool "Support PAM (Pluggable Authentication Modules)"
 	default n
 	help
-	  Use PAM in some busybox applets (currently login and httpd) instead
-	  of direct access to password database.
+	Use PAM in some busybox applets (currently login and httpd) instead
+	of direct access to password database.
 
 config FEATURE_DEVPTS
 	bool "Use the devpts filesystem for Unix98 PTYs"
 	default y
 	help
-	  Enable if you want BusyBox to use Unix98 PTY support. If enabled,
-	  busybox will use /dev/ptmx for the master side of the pseudoterminal
-	  and /dev/pts/<number> for the slave side. Otherwise, BSD style
-	  /dev/ttyp<number> will be used. To use this option, you should have
-	  devpts mounted.
+	Enable if you want BusyBox to use Unix98 PTY support. If enabled,
+	busybox will use /dev/ptmx for the master side of the pseudoterminal
+	and /dev/pts/<number> for the slave side. Otherwise, BSD style
+	/dev/ttyp<number> will be used. To use this option, you should have
+	devpts mounted.
 
 config FEATURE_UTMP
 	bool "Support utmp file"
 	default y
 	help
-	  The file /var/run/utmp is used to track who is currently logged in.
-	  With this option on, certain applets (getty, login, telnetd etc)
-	  will create and delete entries there.
-	  "who" applet requires this option.
+	The file /var/run/utmp is used to track who is currently logged in.
+	With this option on, certain applets (getty, login, telnetd etc)
+	will create and delete entries there.
+	"who" applet requires this option.
 
 config FEATURE_WTMP
 	bool "Support wtmp file"
 	default y
 	depends on FEATURE_UTMP
 	help
-	  The file /var/run/wtmp is used to track when users have logged into
-	  and logged out of the system.
-	  With this option on, certain applets (getty, login, telnetd etc)
-	  will append new entries there.
-	  "last" applet requires this option.
+	The file /var/run/wtmp is used to track when users have logged into
+	and logged out of the system.
+	With this option on, certain applets (getty, login, telnetd etc)
+	will append new entries there.
+	"last" applet requires this option.
 
 config FEATURE_PIDFILE
 	bool "Support writing pidfiles"
 	default y
 	help
-	  This option makes some applets (e.g. crond, syslogd, inetd) write
-	  a pidfile at the configured PID_FILE_PATH.  It has no effect
-	  on applets which require pidfiles to run.
+	This option makes some applets (e.g. crond, syslogd, inetd) write
+	a pidfile at the configured PID_FILE_PATH.  It has no effect
+	on applets which require pidfiles to run.
 
 config PID_FILE_PATH
 	string "Directory for pidfiles"
 	default "/var/run"
 	depends on FEATURE_PIDFILE
 	help
-	  This is the default path where pidfiles are created.  Applets which
-	  allow you to set the pidfile path on the command line will override
-	  this value.  The option has no effect on applets that require you to
-	  specify a pidfile path.
+	This is the default path where pidfiles are created.  Applets which
+	allow you to set the pidfile path on the command line will override
+	this value.  The option has no effect on applets that require you to
+	specify a pidfile path.
 
 config BUSYBOX
 	bool "Include busybox applet"
 	default y
 	help
-	  The busybox applet provides general help regarding busybox and
-	  allows the included applets to be listed.  It's also required
-	  if applet links are to be installed at runtime. If you unselect
-	  this option, running busybox without any arguments will give
-	  just a cryptic error message:
+	The busybox applet provides general help regarding busybox and
+	allows the included applets to be listed.  It's also required
+	if applet links are to be installed at runtime. If you unselect
+	this option, running busybox without any arguments will give
+	just a cryptic error message:
 
-	  $ busybox
-	  busybox: applet not found
+	$ busybox
+	busybox: applet not found
 
-	  Running "busybox APPLET [ARGS...]" will still work, of course.
+	Running "busybox APPLET [ARGS...]" will still work, of course.
 
 config FEATURE_INSTALLER
 	bool "Support --install [-s] to install applet links at runtime"
 	default y
 	depends on BUSYBOX
 	help
-	  Enable 'busybox --install [-s]' support. This will allow you to use
-	  busybox at runtime to create hard links or symlinks for all the
-	  applets that are compiled into busybox.
+	Enable 'busybox --install [-s]' support. This will allow you to use
+	busybox at runtime to create hard links or symlinks for all the
+	applets that are compiled into busybox.
 
 config INSTALL_NO_USR
 	bool "Don't use /usr"
 	default n
 	help
-	  Disable use of /usr. busybox --install and "make install"
-	  will install applets only to /bin and /sbin,
-	  never to /usr/bin or /usr/sbin.
+	Disable use of /usr. busybox --install and "make install"
+	will install applets only to /bin and /sbin,
+	never to /usr/bin or /usr/sbin.
 
 config FEATURE_SUID
 	bool "Drop SUID state for most applets"
 	default y
 	help
-	  With this option you can install the busybox binary belonging
-	  to root with the suid bit set, enabling some applets to perform
-	  root-level operations even when run by ordinary users
-	  (for example, mounting of user mounts in fstab needs this).
+	With this option you can install the busybox binary belonging
+	to root with the suid bit set, enabling some applets to perform
+	root-level operations even when run by ordinary users
+	(for example, mounting of user mounts in fstab needs this).
 
-	  With this option enabled, Busybox drops privileges for applets
-	  that don't need root access, before entering their main() function.
+	With this option enabled, Busybox drops privileges for applets
+	that don't need root access, before entering their main() function.
 
-	  If you are really paranoid and don't want even initial busybox code
-	  to run under root for evey applet, build two busybox binaries with
-	  different applets in them (and the appropriate symlinks pointing
-	  to each binary), and only set the suid bit on the one that needs it.
+	If you are really paranoid and don't want even initial busybox code
+	to run under root for evey applet, build two busybox binaries with
+	different applets in them (and the appropriate symlinks pointing
+	to each binary), and only set the suid bit on the one that needs it.
 
-	  Some applets which require root rights (need suid bit on the binary
-	  or to be run by root) and will refuse to execute otherwise:
-	  crontab, login, passwd, su, vlock, wall.
+	Some applets which require root rights (need suid bit on the binary
+	or to be run by root) and will refuse to execute otherwise:
+	crontab, login, passwd, su, vlock, wall.
 
-	  The applets which will use root rights if they have them
-	  (via suid bit, or because run by root), but would try to work
-	  without root right nevertheless:
-	  findfs, ping[6], traceroute[6], mount.
+	The applets which will use root rights if they have them
+	(via suid bit, or because run by root), but would try to work
+	without root right nevertheless:
+	findfs, ping[6], traceroute[6], mount.
 
-	  Note that if you DO NOT select this option, but DO make busybox
-	  suid root, ALL applets will run under root, which is a huge
-	  security hole (think "cp /some/file /etc/passwd").
+	Note that if you DO NOT select this option, but DO make busybox
+	suid root, ALL applets will run under root, which is a huge
+	security hole (think "cp /some/file /etc/passwd").
 
 config FEATURE_SUID_CONFIG
 	bool "Enable SUID configuration via /etc/busybox.conf"
 	default y
 	depends on FEATURE_SUID
 	help
-	  Allow the SUID/SGID state of an applet to be determined at runtime
-	  by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
-	  The format of this file is as follows:
-
-	  APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
-
-	  s: USER or GROUP is allowed to execute APPLET.
-	     APPLET will run under USER or GROUP
-	     (reagardless of who's running it).
-	  S: USER or GROUP is NOT allowed to execute APPLET.
-	     APPLET will run under USER or GROUP.
-	     This option is not very sensical.
-	  x: USER/GROUP/others are allowed to execute APPLET.
-	     No UID/GID change will be done when it is run.
-	  -: USER/GROUP/others are not allowed to execute APPLET.
-
-	  An example might help:
-
-	  [SUID]
-	  su = ssx root.0 # applet su can be run by anyone and runs with
-	                  # euid=0,egid=0
-	  su = ssx        # exactly the same
-
-	  mount = sx- root.disk # applet mount can be run by root and members
-	                        # of group disk (but not anyone else)
-	                        # and runs with euid=0 (egid is not changed)
-
-	  cp = --- # disable applet cp for everyone
-
-	  The file has to be owned by user root, group root and has to be
-	  writeable only by root:
-	        (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
-	  The busybox executable has to be owned by user root, group
-	  root and has to be setuid root for this to work:
-	        (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
-
-	  Robert 'sandman' Griebl has more information here:
-	  <url: http://www.softforge.de/bb/suid.html >.
+	Allow the SUID/SGID state of an applet to be determined at runtime
+	by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
+	The format of this file is as follows:
+
+	APPLET = [Ssx-][Ssx-][x-] [USER.GROUP]
+
+	s: USER or GROUP is allowed to execute APPLET.
+	   APPLET will run under USER or GROUP
+	   (regardless of who's running it).
+	S: USER or GROUP is NOT allowed to execute APPLET.
+	   APPLET will run under USER or GROUP.
+	   This option is not very sensical.
+	x: USER/GROUP/others are allowed to execute APPLET.
+	   No UID/GID change will be done when it is run.
+	-: USER/GROUP/others are not allowed to execute APPLET.
+
+	An example might help:
+
+	|[SUID]
+	|su = ssx root.0 # applet su can be run by anyone and runs with
+	|                # euid=0,egid=0
+	|su = ssx        # exactly the same
+	|
+	|mount = sx- root.disk # applet mount can be run by root and members
+	|                      # of group disk (but not anyone else)
+	|                      # and runs with euid=0 (egid is not changed)
+	|
+	|cp = --- # disable applet cp for everyone
+
+	The file has to be owned by user root, group root and has to be
+	writeable only by root:
+		(chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
+	The busybox executable has to be owned by user root, group
+	root and has to be setuid root for this to work:
+		(chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
+
+	Robert 'sandman' Griebl has more information here:
+	<url: http://www.softforge.de/bb/suid.html >.
 
 config FEATURE_SUID_CONFIG_QUIET
 	bool "Suppress warning message if /etc/busybox.conf is not readable"
 	default y
 	depends on FEATURE_SUID_CONFIG
 	help
-	  /etc/busybox.conf should be readable by the user needing the SUID,
-	  check this option to avoid users to be notified about missing
-	  permissions.
+	/etc/busybox.conf should be readable by the user needing the SUID,
+	check this option to avoid users to be notified about missing
+	permissions.
 
 config FEATURE_PREFER_APPLETS
 	bool "exec prefers applets"
 	default n
 	help
-	  This is an experimental option which directs applets about to
-	  call 'exec' to try and find an applicable busybox applet before
-	  searching the PATH. This is typically done by exec'ing
-	  /proc/self/exe.
+	This is an experimental option which directs applets about to
+	call 'exec' to try and find an applicable busybox applet before
+	searching the PATH. This is typically done by exec'ing
+	/proc/self/exe.
 
-	  This may affect shell, find -exec, xargs and similar applets.
-	  They will use applets even if /bin/APPLET -> busybox link
-	  is missing (or is not a link to busybox). However, this causes
-	  problems in chroot jails without mounted /proc and with ps/top
-	  (command name can be shown as 'exe' for applets started this way).
+	This may affect shell, find -exec, xargs and similar applets.
+	They will use applets even if /bin/APPLET -> busybox link
+	is missing (or is not a link to busybox). However, this causes
+	problems in chroot jails without mounted /proc and with ps/top
+	(command name can be shown as 'exe' for applets started this way).
 
 config BUSYBOX_EXEC_PATH
 	string "Path to BusyBox executable"
 	default "/proc/self/exe"
 	help
-	  When Busybox applets need to run other busybox applets, BusyBox
-	  sometimes needs to exec() itself. When the /proc filesystem is
-	  mounted, /proc/self/exe always points to the currently running
-	  executable. If you haven't got /proc, set this to wherever you
-	  want to run BusyBox from.
+	When Busybox applets need to run other busybox applets, BusyBox
+	sometimes needs to exec() itself. When the /proc filesystem is
+	mounted, /proc/self/exe always points to the currently running
+	executable. If you haven't got /proc, set this to wherever you
+	want to run BusyBox from.
 
 config SELINUX
 	bool "Support NSA Security Enhanced Linux"
 	default n
 	select PLATFORM_LINUX
 	help
-	  Enable support for SELinux in applets ls, ps, and id. Also provide
-	  the option of compiling in SELinux applets.
+	Enable support for SELinux in applets ls, ps, and id. Also provide
+	the option of compiling in SELinux applets.
 
-	  If you do not have a complete SELinux userland installed, this stuff
-	  will not compile.  Specifially, libselinux 1.28 or better is
-	  directly required by busybox. If the installation is located in a
-	  non-standard directory, provide it by invoking make as follows:
+	If you do not have a complete SELinux userland installed, this stuff
+	will not compile.  Specifially, libselinux 1.28 or better is
+	directly required by busybox. If the installation is located in a
+	non-standard directory, provide it by invoking make as follows:
 
 		CFLAGS=-I<libselinux-include-path> \
 		LDFLAGS=-L<libselinux-lib-path> \
 		make
 
-	  Most people will leave this set to 'N'.
+	Most people will leave this set to 'N'.
 
 config FEATURE_CLEAN_UP
 	bool "Clean up all memory before exiting (usually not needed)"
 	default n
 	help
-	  As a size optimization, busybox normally exits without explicitly
-	  freeing dynamically allocated memory or closing files. This saves
-	  space since the OS will clean up for us, but it can confuse debuggers
-	  like valgrind, which report tons of memory and resource leaks.
+	As a size optimization, busybox normally exits without explicitly
+	freeing dynamically allocated memory or closing files. This saves
+	space since the OS will clean up for us, but it can confuse debuggers
+	like valgrind, which report tons of memory and resource leaks.
 
-	  Don't enable this unless you have a really good reason to clean
-	  things up manually.
+	Don't enable this unless you have a really good reason to clean
+	things up manually.
 
 # These are auto-selected by other options
 
@@ -330,26 +330,26 @@ config FEATURE_SYSLOG
 	bool #No description makes it a hidden option
 	default n
 	#help
-	#  This option is auto-selected when you select any applet which may
-	#  send its output to syslog. You do not need to select it manually.
+	#This option is auto-selected when you select any applet which may
+	#send its output to syslog. You do not need to select it manually.
 
 config FEATURE_HAVE_RPC
 	bool #No description makes it a hidden option
 	default n
 	#help
-	#  This is automatically selected if any of enabled applets need it.
-	#  You do not need to select it manually.
+	#This is automatically selected if any of enabled applets need it.
+	#You do not need to select it manually.
 
 config PLATFORM_LINUX
 	bool #No description makes it a hidden option
 	default n
 	#help
-	#  For the most part, busybox requires only POSIX compatibility
-	#  from the target system, but some applets and features use
-	#  Linux-specific interfaces.
+	#For the most part, busybox requires only POSIX compatibility
+	#from the target system, but some applets and features use
+	#Linux-specific interfaces.
 	#
-	#  This is automatically selected if any applet or feature requires
-	#  Linux-specific interfaces. You do not need to select it manually.
+	#This is automatically selected if any applet or feature requires
+	#Linux-specific interfaces. You do not need to select it manually.
 
 comment 'Build Options'
 
@@ -357,37 +357,37 @@ config STATIC
 	bool "Build BusyBox as a static binary (no shared libs)"
 	default n
 	help
-	  If you want to build a static BusyBox binary, which does not
-	  use or require any shared libraries, then enable this option.
-	  This can cause BusyBox to be considerably larger, so you should
-	  leave this option false unless you have a good reason (i.e.
-	  your target platform does not support shared libraries, or
-	  you are building an initrd which doesn't need anything but
-	  BusyBox, etc).
+	If you want to build a static BusyBox binary, which does not
+	use or require any shared libraries, then enable this option.
+	This can cause BusyBox to be considerably larger, so you should
+	leave this option false unless you have a good reason (i.e.
+	your target platform does not support shared libraries, or
+	you are building an initrd which doesn't need anything but
+	BusyBox, etc).
 
-	  Most people will leave this set to 'N'.
+	Most people will leave this set to 'N'.
 
 config PIE
 	bool "Build BusyBox as a position independent executable"
 	default n
 	depends on !STATIC
 	help
-	  Hardened code option. PIE binaries are loaded at a different
-	  address at each invocation. This has some overhead,
-	  particularly on x86-32 which is short on registers.
+	Hardened code option. PIE binaries are loaded at a different
+	address at each invocation. This has some overhead,
+	particularly on x86-32 which is short on registers.
 
-	  Most people will leave this set to 'N'.
+	Most people will leave this set to 'N'.
 
 config NOMMU
 	bool "Force NOMMU build"
 	default n
 	help
-	  Busybox tries to detect whether architecture it is being
-	  built against supports MMU or not. If this detection fails,
-	  or if you want to build NOMMU version of busybox for testing,
-	  you may force NOMMU build here.
+	Busybox tries to detect whether architecture it is being
+	built against supports MMU or not. If this detection fails,
+	or if you want to build NOMMU version of busybox for testing,
+	you may force NOMMU build here.
 
-	  Most people will leave this set to 'N'.
+	Most people will leave this set to 'N'.
 
 # PIE can be made to work with BUILD_LIBBUSYBOX, but currently
 # build system does not support that
@@ -396,128 +396,128 @@ config BUILD_LIBBUSYBOX
 	default n
 	depends on !FEATURE_PREFER_APPLETS && !PIE && !STATIC
 	help
-	  Build a shared library libbusybox.so.N.N.N which contains all
-	  busybox code.
+	Build a shared library libbusybox.so.N.N.N which contains all
+	busybox code.
 
-	  This feature allows every applet to be built as a really tiny
-	  separate executable linked against the library:
-	  $ size 0_lib/l*
-	    text  data   bss     dec    hex filename
-	     939   212    28    1179    49b 0_lib/last
-	     939   212    28    1179    49b 0_lib/less
-	  919138  8328  1556  929022  e2cfe 0_lib/libbusybox.so.1.N.M
+	This feature allows every applet to be built as a really tiny
+	separate executable linked against the library:
+	|$ size 0_lib/l*
+	|    text  data   bss     dec    hex filename
+	|     939   212    28    1179    49b 0_lib/last
+	|     939   212    28    1179    49b 0_lib/less
+	|  919138  8328  1556  929022  e2cfe 0_lib/libbusybox.so.1.N.M
 
-	  This is useful on NOMMU systems which are not capable
-	  of sharing executables, but are capable of sharing code
-	  in dynamic libraries.
+	This is useful on NOMMU systems which are not capable
+	of sharing executables, but are capable of sharing code
+	in dynamic libraries.
 
 config FEATURE_LIBBUSYBOX_STATIC
 	bool "Pull in all external references into libbusybox"
 	default n
 	depends on BUILD_LIBBUSYBOX
 	help
-	  Make libbusybox library independent, not using or requiring
-	  any other shared libraries.
+	Make libbusybox library independent, not using or requiring
+	any other shared libraries.
 
 config FEATURE_INDIVIDUAL
 	bool "Produce a binary for each applet, linked against libbusybox"
 	default y
 	depends on BUILD_LIBBUSYBOX
 	help
-	  If your CPU architecture doesn't allow for sharing text/rodata
-	  sections of running binaries, but allows for runtime dynamic
-	  libraries, this option will allow you to reduce memory footprint
-	  when you have many different applets running at once.
+	If your CPU architecture doesn't allow for sharing text/rodata
+	sections of running binaries, but allows for runtime dynamic
+	libraries, this option will allow you to reduce memory footprint
+	when you have many different applets running at once.
 
-	  If your CPU architecture allows for sharing text/rodata,
-	  having single binary is more optimal.
+	If your CPU architecture allows for sharing text/rodata,
+	having single binary is more optimal.
 
-	  Each applet will be a tiny program, dynamically linked
-	  against libbusybox.so.N.N.N.
+	Each applet will be a tiny program, dynamically linked
+	against libbusybox.so.N.N.N.
 
-	  You need to have a working dynamic linker.
+	You need to have a working dynamic linker.
 
 config FEATURE_SHARED_BUSYBOX
 	bool "Produce additional busybox binary linked against libbusybox"
 	default y
 	depends on BUILD_LIBBUSYBOX
 	help
-	  Build busybox, dynamically linked against libbusybox.so.N.N.N.
+	Build busybox, dynamically linked against libbusybox.so.N.N.N.
 
-	  You need to have a working dynamic linker.
+	You need to have a working dynamic linker.
 
 ### config BUILD_AT_ONCE
 ###	bool "Compile all sources at once"
 ###	default n
 ###	help
-###	  Normally each source-file is compiled with one invocation of
-###	  the compiler.
-###	  If you set this option, all sources are compiled at once.
-###	  This gives the compiler more opportunities to optimize which can
-###	  result in smaller and/or faster binaries.
+###	Normally each source-file is compiled with one invocation of
+###	the compiler.
+###	If you set this option, all sources are compiled at once.
+###	This gives the compiler more opportunities to optimize which can
+###	result in smaller and/or faster binaries.
 ###
-###	  Setting this option will consume alot of memory, e.g. if you
-###	  enable all applets with all features, gcc uses more than 300MB
-###	  RAM during compilation of busybox.
+###	Setting this option will consume alot of memory, e.g. if you
+###	enable all applets with all features, gcc uses more than 300MB
+###	RAM during compilation of busybox.
 ###
-###	  This option is most likely only beneficial for newer compilers
-###	  such as gcc-4.1 and above.
+###	This option is most likely only beneficial for newer compilers
+###	such as gcc-4.1 and above.
 ###
-###	  Say 'N' unless you know what you are doing.
+###	Say 'N' unless you know what you are doing.
 
 config CROSS_COMPILER_PREFIX
 	string "Cross Compiler prefix"
 	default ""
 	help
-	  If you want to build BusyBox with a cross compiler, then you
-	  will need to set this to the cross-compiler prefix, for example,
-	  "i386-uclibc-".
+	If you want to build BusyBox with a cross compiler, then you
+	will need to set this to the cross-compiler prefix, for example,
+	"i386-uclibc-".
 
-	  Note that CROSS_COMPILE environment variable or
-	  "make CROSS_COMPILE=xxx ..." will override this selection.
+	Note that CROSS_COMPILE environment variable or
+	"make CROSS_COMPILE=xxx ..." will override this selection.
 
-	  Native builds leave this empty.
+	Native builds leave this empty.
 
 config SYSROOT
 	string "Path to sysroot"
 	default ""
 	help
-	  If you want to build BusyBox with a cross compiler, then you
-	  might also need to specify where /usr/include and /usr/lib
-	  will be found.
+	If you want to build BusyBox with a cross compiler, then you
+	might also need to specify where /usr/include and /usr/lib
+	will be found.
 
-	  For example, BusyBox can be built against an installed
-	  Android NDK, platform version 9, for ARM ABI with
+	For example, BusyBox can be built against an installed
+	Android NDK, platform version 9, for ARM ABI with
 
-	  CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
+	CONFIG_SYSROOT=/opt/android-ndk/platforms/android-9/arch-arm
 
-	  Native builds leave this empty.
+	Native builds leave this empty.
 
 config EXTRA_CFLAGS
 	string "Additional CFLAGS"
 	default ""
 	help
-	  Additional CFLAGS to pass to the compiler verbatim.
+	Additional CFLAGS to pass to the compiler verbatim.
 
 config EXTRA_LDFLAGS
 	string "Additional LDFLAGS"
 	default ""
 	help
-	  Additional LDFLAGS to pass to the linker verbatim.
+	Additional LDFLAGS to pass to the linker verbatim.
 
 config EXTRA_LDLIBS
 	string "Additional LDLIBS"
 	default ""
 	help
-	  Additional LDLIBS to pass to the linker with -l.
+	Additional LDLIBS to pass to the linker with -l.
 
 config USE_PORTABLE_CODE
 	bool "Avoid using GCC-specific code constructs"
 	default n
 	help
-	  Use this option if you are trying to compile busybox with
-	  compiler other than gcc.
-	  If you do use gcc, this option may needlessly increase code size.
+	Use this option if you are trying to compile busybox with
+	compiler other than gcc.
+	If you do use gcc, this option may needlessly increase code size.
 
 comment 'Installation Options ("make install" behavior)'
 
@@ -525,32 +525,32 @@ choice
 	prompt "What kind of applet links to install"
 	default INSTALL_APPLET_SYMLINKS
 	help
-	  Choose what kind of links to applets are created by "make install".
+	Choose what kind of links to applets are created by "make install".
 
 config INSTALL_APPLET_SYMLINKS
 	bool "as soft-links"
 	help
-	  Install applets as soft-links to the busybox binary. This needs some
-	  free inodes on the filesystem, but might help with filesystem
-	  generators that can't cope with hard-links.
+	Install applets as soft-links to the busybox binary. This needs some
+	free inodes on the filesystem, but might help with filesystem
+	generators that can't cope with hard-links.
 
 config INSTALL_APPLET_HARDLINKS
 	bool "as hard-links"
 	help
-	  Install applets as hard-links to the busybox binary. This might
-	  count on a filesystem with few inodes.
+	Install applets as hard-links to the busybox binary. This might
+	count on a filesystem with few inodes.
 
 config INSTALL_APPLET_SCRIPT_WRAPPERS
 	bool "as script wrappers"
 	help
-	  Install applets as script wrappers that call the busybox binary.
+	Install applets as script wrappers that call the busybox binary.
 
 config INSTALL_APPLET_DONT
 	bool "not installed"
 	help
-	  Do not install applet links. Useful when you plan to use
-	  busybox --install for installing links, or plan to use
-	  a standalone shell and thus don't need applet links.
+	Do not install applet links. Useful when you plan to use
+	busybox --install for installing links, or plan to use
+	a standalone shell and thus don't need applet links.
 
 endchoice
 
@@ -559,23 +559,23 @@ choice
 	default INSTALL_SH_APPLET_SYMLINK
 	depends on INSTALL_APPLET_SCRIPT_WRAPPERS
 	help
-	  Choose how you install /bin/sh applet link.
+	Choose how you install /bin/sh applet link.
 
 config INSTALL_SH_APPLET_SYMLINK
 	bool "as soft-link"
 	help
-	  Install /bin/sh applet as soft-link to the busybox binary.
+	Install /bin/sh applet as soft-link to the busybox binary.
 
 config INSTALL_SH_APPLET_HARDLINK
 	bool "as hard-link"
 	help
-	  Install /bin/sh applet as hard-link to the busybox binary.
+	Install /bin/sh applet as hard-link to the busybox binary.
 
 config INSTALL_SH_APPLET_SCRIPT_WRAPPER
 	bool "as script wrapper"
 	help
-	  Install /bin/sh applet as script wrapper that calls
-	  the busybox binary.
+	Install /bin/sh applet as script wrapper that calls
+	the busybox binary.
 
 endchoice
 
@@ -583,7 +583,7 @@ config PREFIX
 	string "BusyBox installation prefix"
 	default "./_install"
 	help
-	  Define your directory to install BusyBox files/subdirs in.
+	Define your directory to install BusyBox files/subdirs in.
 
 comment 'Debugging Options'
 
@@ -591,81 +591,81 @@ config DEBUG
 	bool "Build BusyBox with extra Debugging symbols"
 	default n
 	help
-	  Say Y here if you wish to examine BusyBox internals while applets are
-	  running. This increases the size of the binary considerably, and
-	  should only be used when doing development. If you are doing
-	  development and want to debug BusyBox, answer Y.
+	Say Y here if you wish to examine BusyBox internals while applets are
+	running. This increases the size of the binary considerably, and
+	should only be used when doing development. If you are doing
+	development and want to debug BusyBox, answer Y.
 
-	  Most people should answer N.
+	Most people should answer N.
 
 config DEBUG_PESSIMIZE
 	bool "Disable compiler optimizations"
 	default n
 	depends on DEBUG
 	help
-	  The compiler's optimization of source code can eliminate and reorder
-	  code, resulting in an executable that's hard to understand when
-	  stepping through it with a debugger. This switches it off, resulting
-	  in a much bigger executable that more closely matches the source
-	  code.
+	The compiler's optimization of source code can eliminate and reorder
+	code, resulting in an executable that's hard to understand when
+	stepping through it with a debugger. This switches it off, resulting
+	in a much bigger executable that more closely matches the source
+	code.
 
 config DEBUG_SANITIZE
 	bool "Enable runtime sanitizers (ASAN/LSAN/USAN/etc...)"
 	default n
 	help
-	  Say Y here if you want to enable runtime sanitizers. These help
-	  catch bad memory accesses (e.g. buffer overflows), but will make
-	  the executable larger and slow down runtime a bit.
+	Say Y here if you want to enable runtime sanitizers. These help
+	catch bad memory accesses (e.g. buffer overflows), but will make
+	the executable larger and slow down runtime a bit.
 
-	  This adds -fsanitize=foo options to gcc command line.
+	This adds -fsanitize=foo options to gcc command line.
 
-	  If you aren't developing/testing busybox, say N here.
+	If you aren't developing/testing busybox, say N here.
 
 config UNIT_TEST
 	bool "Build unit tests"
 	default n
 	help
-	  Say Y here if you want to build unit tests (both the framework and
-	  test cases) as a Busybox applet. This results in bigger code, so you
-	  probably don't want this option in production builds.
+	Say Y here if you want to build unit tests (both the framework and
+	test cases) as a Busybox applet. This results in bigger code, so you
+	probably don't want this option in production builds.
 
 config WERROR
 	bool "Abort compilation on any warning"
 	default n
 	help
-	  This adds -Werror to gcc command line.
+	This adds -Werror to gcc command line.
 
-	  Most people should answer N.
+	Most people should answer N.
 
 choice
 	prompt "Additional debugging library"
 	default NO_DEBUG_LIB
 	help
-	  Using an additional debugging library will make BusyBox become
-	  considerable larger and will cause it to run more slowly. You
-	  should always leave this option disabled for production use.
-
-	  dmalloc support:
-	  ----------------
-	  This enables compiling with dmalloc ( http://dmalloc.com/ )
-	  which is an excellent public domain mem leak and malloc problem
-	  detector. To enable dmalloc, before running busybox you will
-	  want to properly set your environment, for example:
-	    export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
-	  The 'debug=' value is generated using the following command
-	    dmalloc -p log-stats -p log-non-free -p log-bad-space \
-	       -p log-elapsed-time -p check-fence -p check-heap \
-	       -p check-lists -p check-blank -p check-funcs -p realloc-copy \
-	       -p allow-free-null
-
-	  Electric-fence support:
-	  -----------------------
-	  This enables compiling with Electric-fence support. Electric
-	  fence is another very useful malloc debugging library which uses
-	  your computer's virtual memory hardware to detect illegal memory
-	  accesses. This support will make BusyBox be considerable larger
-	  and run slower, so you should leave this option disabled unless
-	  you are hunting a hard to find memory problem.
+	Using an additional debugging library will make BusyBox become
+	considerable larger and will cause it to run more slowly. You
+	should always leave this option disabled for production use.
+
+	dmalloc support:
+	----------------
+	This enables compiling with dmalloc ( http://dmalloc.com/ )
+	which is an excellent public domain mem leak and malloc problem
+	detector. To enable dmalloc, before running busybox you will
+	want to properly set your environment, for example:
+		export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+	The 'debug=' value is generated using the following command
+	dmalloc -p log-stats -p log-non-free -p log-bad-space \
+		-p log-elapsed-time -p check-fence -p check-heap \
+		-p check-lists -p check-blank -p check-funcs -p realloc-copy \
+		-p allow-free-null
+
+	Electric-fence support:
+	-----------------------
+	This enables compiling with Electric-fence support. Electric
+	fence is another very useful malloc debugging library which uses
+	your computer's virtual memory hardware to detect illegal memory
+	accesses. This support will make BusyBox be considerable larger
+	and run slower, so you should leave this option disabled unless
+	you are hunting a hard to find memory problem.
 
 
 config NO_DEBUG_LIB