Convert all networking/* applets to "new style" applet definitions

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

1 files changed, 1 insertions, 793 deletions

diff --git a/networking/Config.src b/networking/Config.src
index 43667fe6a..4d921884f 100644
--- a/networking/Config.src
+++ b/networking/Config.src
@@ -5,8 +5,6 @@
 
 menu "Networking Utilities"
 
-INSERT
-
 config FEATURE_IPV6
 	bool "Enable IPv6 support"
 	default y
@@ -48,558 +46,7 @@ config VERBOSE_RESOLUTION_ERRORS
 	  "can't resolve 'hostname.com'" and want to know more.
 	  This may increase size of your executable a bit.
 
-config ARP
-	bool "arp"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Manipulate the system ARP cache.
-
-config ARPING
-	bool "arping"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Ping hosts by ARP packets.
-
-config BRCTL
-	bool "brctl"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Manage ethernet bridges.
-	  Supports addbr/delbr and addif/delif.
-
-config FEATURE_BRCTL_FANCY
-	bool "Fancy options"
-	default y
-	depends on BRCTL
-	help
-	  Add support for extended option like:
-	    setageing, setfd, sethello, setmaxage,
-	    setpathcost, setportprio, setbridgeprio,
-	    stp
-	  This adds about 600 bytes.
-
-config FEATURE_BRCTL_SHOW
-	bool "Support show"
-	default y
-	depends on BRCTL && FEATURE_BRCTL_FANCY
-	help
-	  Add support for option which prints the current config:
-	    show
-
-config DNSD
-	bool "dnsd"
-	default y
-	help
-	  Small and static DNS server daemon.
-
-config ETHER_WAKE
-	bool "ether-wake"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Send a magic packet to wake up sleeping machines.
-
-config FAKEIDENTD
-	bool "fakeidentd"
-	default y
-	select FEATURE_SYSLOG
-	help
-	  fakeidentd listens on the ident port and returns a predefined
-	  fake value on any query.
-
-config FTPD
-	bool "ftpd"
-	default y
-	help
-	  simple FTP daemon. You have to run it via inetd.
-
-config FEATURE_FTP_WRITE
-	bool "Enable upload commands"
-	default y
-	depends on FTPD
-	help
-	  Enable all kinds of FTP upload commands (-w option)
-
-config FEATURE_FTPD_ACCEPT_BROKEN_LIST
-	bool "Enable workaround for RFC-violating clients"
-	default y
-	depends on FTPD
-	help
-	  Some ftp clients (among them KDE's Konqueror) issue illegal
-	  "LIST -l" requests. This option works around such problems.
-	  It might prevent you from listing files starting with "-" and
-	  it increases the code size by ~40 bytes.
-	  Most other ftp servers seem to behave similar to this.
-
-config FEATURE_FTP_AUTHENTICATION
-	bool "Enable authentication"
-	default y
-	depends on FTPD
-	help
-	  Enable basic system login as seen in telnet etc.
-
-config FTPGET
-	bool "ftpget"
-	default y
-	help
-	  Retrieve a remote file via FTP.
-
-config FTPPUT
-	bool "ftpput"
-	default y
-	help
-	  Store a remote file via FTP.
-
-config FEATURE_FTPGETPUT_LONG_OPTIONS
-	bool "Enable long options in ftpget/ftpput"
-	default y
-	depends on LONG_OPTS && (FTPGET || FTPPUT)
-	help
-	  Support long options for the ftpget/ftpput applet.
-
-config HTTPD
-	bool "httpd"
-	default y
-	help
-	  Serve web pages via an HTTP server.
-
-config FEATURE_HTTPD_RANGES
-	bool "Support 'Ranges:' header"
-	default y
-	depends on HTTPD
-	help
-	  Makes httpd emit "Accept-Ranges: bytes" header and understand
-	  "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
-	  downloads, seeking in multimedia players etc.
-
-config FEATURE_HTTPD_SETUID
-	bool "Enable -u <user> option"
-	default y
-	depends on HTTPD
-	help
-	  This option allows the server to run as a specific user
-	  rather than defaulting to the user that starts the server.
-	  Use of this option requires special privileges to change to a
-	  different user.
-
-config FEATURE_HTTPD_BASIC_AUTH
-	bool "Enable Basic http Authentication"
-	default y
-	depends on HTTPD
-	help
-	  Utilizes password settings from /etc/httpd.conf for basic
-	  authentication on a per url basis.
-	  Example for httpd.conf file:
-	  /adm:toor:PaSsWd
-
-config FEATURE_HTTPD_AUTH_MD5
-	bool "Support MD5 crypted passwords for http Authentication"
-	default y
-	depends on FEATURE_HTTPD_BASIC_AUTH
-	help
-	  Enables encrypted passwords, and wildcard user/passwords
-	  in httpd.conf file.
-	  User '*' means 'any system user name is ok',
-	  password of '*' means 'use system password for this user'
-	  Examples:
-	  /adm:toor:$1$P/eKnWXS$aI1aPGxT.dJD5SzqAKWrF0
-	  /adm:root:*
-	  /wiki:*:*
-
-config FEATURE_HTTPD_CGI
-	bool "Support Common Gateway Interface (CGI)"
-	default y
-	depends on HTTPD
-	help
-	  This option allows scripts and executables to be invoked
-	  when specific URLs are requested.
-
-config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
-	bool "Support for running scripts through an interpreter"
-	default y
-	depends on FEATURE_HTTPD_CGI
-	help
-	  This option enables support for running scripts through an
-	  interpreter. Turn this on if you want PHP scripts to work
-	  properly. You need to supply an additional line in your
-	  httpd.conf file:
-	  *.php:/path/to/your/php
-
-config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
-	bool "Set REMOTE_PORT environment variable for CGI"
-	default y
-	depends on FEATURE_HTTPD_CGI
-	help
-	  Use of this option can assist scripts in generating
-	  references that contain a unique port number.
-
-config FEATURE_HTTPD_ENCODE_URL_STR
-	bool "Enable -e option (useful for CGIs written as shell scripts)"
-	default y
-	depends on HTTPD
-	help
-	  This option allows html encoding of arbitrary strings for display
-	  by the browser. Output goes to stdout.
-	  For example, httpd -e "<Hello World>" produces
-	  "&#60Hello&#32World&#62".
-
-config FEATURE_HTTPD_ERROR_PAGES
-	bool "Support for custom error pages"
-	default y
-	depends on HTTPD
-	help
-	  This option allows you to define custom error pages in
-	  the configuration file instead of the default HTTP status
-	  error pages. For instance, if you add the line:
-	        E404:/path/e404.html
-	  in the config file, the server will respond the specified
-	  '/path/e404.html' file instead of the terse '404 NOT FOUND'
-	  message.
-
-config FEATURE_HTTPD_PROXY
-	bool "Support for reverse proxy"
-	default y
-	depends on HTTPD
-	help
-	  This option allows you to define URLs that will be forwarded
-	  to another HTTP server. To setup add the following line to the
-	  configuration file
-	        P:/url/:http://hostname[:port]/new/path/
-	  Then a request to /url/myfile will be forwarded to
-	  http://hostname[:port]/new/path/myfile.
-
-config FEATURE_HTTPD_GZIP
-	bool "Support for GZIP content encoding"
-	default y
-	depends on HTTPD
-	help
-	  Makes httpd send files using GZIP content encoding if the
-	  client supports it and a pre-compressed <file>.gz exists.
-
-config IFCONFIG
-	bool "ifconfig"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Ifconfig is used to configure the kernel-resident network interfaces.
-
-config FEATURE_IFCONFIG_STATUS
-	bool "Enable status reporting output (+7k)"
-	default y
-	depends on IFCONFIG
-	help
-	  If ifconfig is called with no arguments it will display the status
-	  of the currently active interfaces.
-
-config FEATURE_IFCONFIG_SLIP
-	bool "Enable slip-specific options \"keepalive\" and \"outfill\""
-	default y
-	depends on IFCONFIG
-	help
-	  Allow "keepalive" and "outfill" support for SLIP. If you're not
-	  planning on using serial lines, leave this unchecked.
-
-config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
-	bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
-	default y
-	depends on IFCONFIG
-	help
-	  Allow the start address for shared memory, start address for I/O,
-	  and/or the interrupt line used by the specified device.
-
-config FEATURE_IFCONFIG_HW
-	bool "Enable option \"hw\" (ether only)"
-	default y
-	depends on IFCONFIG
-	help
-	  Set the hardware address of this interface, if the device driver
-	  supports  this  operation. Currently, we only support the 'ether'
-	  class.
-
-config FEATURE_IFCONFIG_BROADCAST_PLUS
-	bool "Set the broadcast automatically"
-	default y
-	depends on IFCONFIG
-	help
-	  Setting this will make ifconfig attempt to find the broadcast
-	  automatically if the value '+' is used.
-
-config IFENSLAVE
-	bool "ifenslave"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Userspace application to bind several interfaces
-	  to a logical interface (use with kernel bonding driver).
-
-config IFPLUGD
-	bool "ifplugd"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Network interface plug detection daemon.
-
-config INETD
-	bool "inetd"
-	default y
-	select FEATURE_SYSLOG
-	help
-	  Internet superserver daemon
-
-config FEATURE_INETD_SUPPORT_BUILTIN_ECHO
-	bool "Support echo service"
-	default y
-	depends on INETD
-	help
-	  Echo received data internal inetd service
-
-config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
-	bool "Support discard service"
-	default y
-	depends on INETD
-	help
-	  Internet /dev/null internal inetd service
-
-config FEATURE_INETD_SUPPORT_BUILTIN_TIME
-	bool "Support time service"
-	default y
-	depends on INETD
-	help
-	  Return 32 bit time since 1900 internal inetd service
-
-config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
-	bool "Support daytime service"
-	default y
-	depends on INETD
-	help
-	  Return human-readable time internal inetd service
-
-config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
-	bool "Support chargen service"
-	default y
-	depends on INETD
-	help
-	  Familiar character generator internal inetd service
-
-config FEATURE_INETD_RPC
-	bool "Support RPC services"
-	default n  # very rarely used, and needs Sun RPC support in libc
-	depends on INETD
-	select FEATURE_HAVE_RPC
-	help
-	  Support Sun-RPC based services
-
-config IP
-	bool "ip"
-	default y
-	select PLATFORM_LINUX
-	help
-	  The "ip" applet is a TCP/IP interface configuration and routing
-	  utility. You generally don't need "ip" to use busybox with
-	  TCP/IP.
-
-config FEATURE_IP_ADDRESS
-	bool "ip address"
-	default y
-	depends on IP
-	help
-	  Address manipulation support for the "ip" applet.
-
-config FEATURE_IP_LINK
-	bool "ip link"
-	default y
-	depends on IP
-	help
-	  Configure network devices with "ip".
-
-config FEATURE_IP_ROUTE
-	bool "ip route"
-	default y
-	depends on IP
-	help
-	  Add support for routing table management to "ip".
-
-config FEATURE_IP_ROUTE_DIR
-	string "ip route configuration directory"
-	default "/etc/iproute2"
-	depends on FEATURE_IP_ROUTE
-	help
-	  Location of the "ip" applet routing configuration.
-
-config FEATURE_IP_TUNNEL
-	bool "ip tunnel"
-	default y
-	depends on IP
-	help
-	  Add support for tunneling commands to "ip".
-
-config FEATURE_IP_RULE
-	bool "ip rule"
-	default y
-	depends on IP
-	help
-	  Add support for rule commands to "ip".
-
-config FEATURE_IP_NEIGH
-	bool "ip neighbor"
-	default y
-	depends on IP
-	help
-	  Add support for neighbor commands to "ip".
-
-config FEATURE_IP_SHORT_FORMS
-	bool "Support short forms of ip commands"
-	default y
-	depends on IP
-	help
-	  Also support short-form of ip <OBJECT> commands:
-	  ip addr   -> ipaddr
-	  ip link   -> iplink
-	  ip route  -> iproute
-	  ip tunnel -> iptunnel
-	  ip rule   -> iprule
-	  ip neigh  -> ipneigh
-
-	  Say N unless you desparately need the short form of the ip
-	  object commands.
-
-config FEATURE_IP_RARE_PROTOCOLS
-	bool "Support displaying rarely used link types"
-	default n
-	depends on IP
-	help
-	  If you are not going to use links of type "frad", "econet",
-	  "bif" etc, you probably don't need to enable this.
-	  Ethernet, wireless, infrared, ppp/slip, ip tunnelling
-	  link types are supported without this option selected.
-
-config IPADDR
-	bool
-	default y
-	depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ADDRESS
-
-config IPLINK
-	bool
-	default y
-	depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_LINK
-
-config IPROUTE
-	bool
-	default y
-	depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ROUTE
-
-config IPTUNNEL
-	bool
-	default y
-	depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_TUNNEL
-
-config IPRULE
-	bool
-	default y
-	depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_RULE
-
-config IPNEIGH
-	bool
-	default y
-	depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_NEIGH
-
-config IPCALC
-	bool "ipcalc"
-	default y
-	help
-	  ipcalc takes an IP address and netmask and calculates the
-	  resulting broadcast, network, and host range.
-
-config FEATURE_IPCALC_FANCY
-	bool "Fancy IPCALC, more options, adds 1 kbyte"
-	default y
-	depends on IPCALC
-	help
-	  Adds the options hostname, prefix and silent to the output of
-	  "ipcalc".
-
-config FEATURE_IPCALC_LONG_OPTIONS
-	bool "Enable long options"
-	default y
-	depends on IPCALC && LONG_OPTS
-	help
-	  Support long options for the ipcalc applet.
-
-config NETSTAT
-	bool "netstat"
-	default y
-	select PLATFORM_LINUX
-	help
-	  netstat prints information about the Linux networking subsystem.
-
-config FEATURE_NETSTAT_WIDE
-	bool "Enable wide netstat output"
-	default y
-	depends on NETSTAT
-	help
-	  Add support for wide columns. Useful when displaying IPv6 addresses
-	  (-W option).
-
-config FEATURE_NETSTAT_PRG
-	bool "Enable PID/Program name output"
-	default y
-	depends on NETSTAT
-	help
-	  Add support for -p flag to print out PID and program name.
-	  +700 bytes of code.
-
-config NSLOOKUP
-	bool "nslookup"
-	default y
-	help
-	  nslookup is a tool to query Internet name servers.
-
-config NTPD
-	bool "ntpd"
-	default y
-	select PLATFORM_LINUX
-	help
-	  The NTP client/server daemon.
-
-config FEATURE_NTPD_SERVER
-	bool "Make ntpd usable as a NTP server"
-	default y
-	depends on NTPD
-	help
-	  Make ntpd usable as a NTP server. If you disable this option
-	  ntpd will be usable only as a NTP client.
-
-config FEATURE_NTPD_CONF
-	bool "Make ntpd understand /etc/ntp.conf"
-	default y
-	depends on NTPD
-	help
-	  Make ntpd look in /etc/ntp.conf for peers. Only "server address"
-	  is supported.
-
-config PSCAN
-	bool "pscan"
-	default y
-	help
-	  Simple network port scanner.
-
-config ROUTE
-	bool "route"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Route displays or manipulates the kernel's IP routing tables.
-
-config SLATTACH
-	bool "slattach"
-	default y
-	select PLATFORM_LINUX
-	help
-	  slattach is a small utility to attach network interfaces to serial
-	  lines.
+INSERT
 
 #config TC
 #	bool "tc"
@@ -611,218 +58,6 @@ config SLATTACH
 #	def_bool n
 #	depends on TC
 
-config TCPSVD
-	bool "tcpsvd"
-	default y
-	help
-	  tcpsvd listens on a TCP port and runs a program for each new
-	  connection.
-
-config TELNET
-	bool "telnet"
-	default y
-	help
-	  Telnet is an interface to the TELNET protocol, but is also commonly
-	  used to test other simple protocols.
-
-config FEATURE_TELNET_TTYPE
-	bool "Pass TERM type to remote host"
-	default y
-	depends on TELNET
-	help
-	  Setting this option will forward the TERM environment variable to the
-	  remote host you are connecting to. This is useful to make sure that
-	  things like ANSI colors and other control sequences behave.
-
-config FEATURE_TELNET_AUTOLOGIN
-	bool "Pass USER type to remote host"
-	default y
-	depends on TELNET
-	help
-	  Setting this option will forward the USER environment variable to the
-	  remote host you are connecting to. This is useful when you need to
-	  log into a machine without telling the username (autologin). This
-	  option enables `-a' and `-l USER' arguments.
-
-config TELNETD
-	bool "telnetd"
-	default y
-	select FEATURE_SYSLOG
-	help
-	  A daemon for the TELNET protocol, allowing you to log onto the host
-	  running the daemon. Please keep in mind that the TELNET protocol
-	  sends passwords in plain text. If you can't afford the space for an
-	  SSH daemon and you trust your network, you may say 'y' here. As a
-	  more secure alternative, you should seriously consider installing the
-	  very small Dropbear SSH daemon instead:
-		http://matt.ucc.asn.au/dropbear/dropbear.html
-
-	  Note that for busybox telnetd to work you need several things:
-	  First of all, your kernel needs:
-		  CONFIG_UNIX98_PTYS=y
-
-	  Next, you need a /dev/pts directory on your root filesystem:
-
-		  $ ls -ld /dev/pts
-		  drwxr-xr-x  2 root root 0 Sep 23 13:21 /dev/pts/
-
-	  Next you need the pseudo terminal master multiplexer /dev/ptmx:
-
-		  $ ls -la /dev/ptmx
-		  crw-rw-rw-  1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
-
-	  Any /dev/ttyp[0-9]* files you may have can be removed.
-	  Next, you need to mount the devpts filesystem on /dev/pts using:
-
-		  mount -t devpts devpts /dev/pts
-
-	  You need to be sure that busybox has LOGIN and
-	  FEATURE_SUID enabled. And finally, you should make
-	  certain that Busybox has been installed setuid root:
-
-		chown root.root /bin/busybox
-		chmod 4755 /bin/busybox
-
-	  with all that done, telnetd _should_ work....
-
-
-config FEATURE_TELNETD_STANDALONE
-	bool "Support standalone telnetd (not inetd only)"
-	default y
-	depends on TELNETD
-	help
-	  Selecting this will make telnetd able to run standalone.
-
-config FEATURE_TELNETD_INETD_WAIT
-	bool "Support -w SEC option (inetd wait mode)"
-	default y
-	depends on FEATURE_TELNETD_STANDALONE
-	help
-	  This option allows you to run telnetd in "inet wait" mode.
-	  Example inetd.conf line (note "wait", not usual "nowait"):
-
-	  telnet stream tcp wait root /bin/telnetd telnetd -w10
-
-	  In this example, inetd passes _listening_ socket_ as fd 0
-	  to telnetd when connection appears.
-	  telnetd will wait for connections until all existing
-	  connections are closed, and no new connections
-	  appear during 10 seconds. Then it exits, and inetd continues
-	  to listen for new connections.
-
-	  This option is rarely used. "tcp nowait" is much more usual
-	  way of running tcp services, including telnetd.
-	  You most probably want to say N here.
-
-config TFTP
-	bool "tftp"
-	default y
-	help
-	  This enables the Trivial File Transfer Protocol client program. TFTP
-	  is usually used for simple, small transfers such as a root image
-	  for a network-enabled bootloader.
-
-config TFTPD
-	bool "tftpd"
-	default y
-	help
-	  This enables the Trivial File Transfer Protocol server program.
-	  It expects that stdin is a datagram socket and a packet
-	  is already pending on it. It will exit after one transfer.
-	  In other words: it should be run from inetd in nowait mode,
-	  or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
-
-comment "Common options for tftp/tftpd"
-	depends on TFTP || TFTPD
-
-config FEATURE_TFTP_GET
-	bool "Enable 'tftp get' and/or tftpd upload code"
-	default y
-	depends on TFTP || TFTPD
-	help
-	  Add support for the GET command within the TFTP client. This allows
-	  a client to retrieve a file from a TFTP server.
-	  Also enable upload support in tftpd, if tftpd is selected.
-
-	  Note: this option does _not_ make tftpd capable of download
-	  (the usual operation people need from it)!
-
-config FEATURE_TFTP_PUT
-	bool "Enable 'tftp put' and/or tftpd download code"
-	default y
-	depends on TFTP || TFTPD
-	help
-	  Add support for the PUT command within the TFTP client. This allows
-	  a client to transfer a file to a TFTP server.
-	  Also enable download support in tftpd, if tftpd is selected.
-
-config FEATURE_TFTP_BLOCKSIZE
-	bool "Enable 'blksize' and 'tsize' protocol options"
-	default y
-	depends on TFTP || TFTPD
-	help
-	  Allow tftp to specify block size, and tftpd to understand
-	  "blksize" and "tsize" options.
-
-config FEATURE_TFTP_PROGRESS_BAR
-	bool "Enable tftp progress meter"
-	default y
-	depends on TFTP && FEATURE_TFTP_BLOCKSIZE
-	help
-	  Show progress bar.
-
-config TFTP_DEBUG
-	bool "Enable debug"
-	default n
-	depends on TFTP || TFTPD
-	help
-	  Make tftp[d] print debugging messages on stderr.
-	  This is useful if you are diagnosing a bug in tftp[d].
-
-config TRACEROUTE
-	bool "traceroute"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Utility to trace the route of IP packets.
-
-config TRACEROUTE6
-	bool "traceroute6"
-	default y
-	depends on FEATURE_IPV6 && TRACEROUTE
-	help
-	  Utility to trace the route of IPv6 packets.
-
-config FEATURE_TRACEROUTE_VERBOSE
-	bool "Enable verbose output"
-	default y
-	depends on TRACEROUTE
-	help
-	  Add some verbosity to traceroute. This includes among other things
-	  hostnames and ICMP response types.
-
-config FEATURE_TRACEROUTE_USE_ICMP
-	bool "Enable -I option (use ICMP instead of UDP)"
-	default y
-	depends on TRACEROUTE
-	help
-	  Add option -I to use ICMP ECHO instead of UDP datagrams.
-
-config TUNCTL
-	bool "tunctl"
-	default y
-	select PLATFORM_LINUX
-	help
-	  tunctl creates or deletes tun devices.
-
-config FEATURE_TUNCTL_UG
-	bool "Support owner:group assignment"
-	default y
-	depends on TUNCTL
-	help
-	  Allow to specify owner and group of newly created interface.
-	  340 bytes of pure bloat. Say no here.
-
 source networking/udhcp/Config.in
 
 config IFUPDOWN_UDHCPC_CMD_OPTIONS
@@ -834,31 +69,4 @@ config IFUPDOWN_UDHCPC_CMD_OPTIONS
 	  Intended to alter options not available in /etc/network/interfaces.
 	  (IE: --syslog --background etc...)
 
-config UDPSVD
-	bool "udpsvd"
-	default y
-	help
-	  udpsvd listens on an UDP port and runs a program for each new
-	  connection.
-
-config VCONFIG
-	bool "vconfig"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Creates, removes, and configures VLAN interfaces
-
-config ZCIP
-	bool "zcip"
-	default y
-	select PLATFORM_LINUX
-	select FEATURE_SYSLOG
-	help
-	  ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
-	  It's a daemon that allocates and defends a dynamically assigned
-	  address on the 169.254/16 network, requiring no system administrator.
-
-	  See http://www.zeroconf.org for further details, and "zcip.script"
-	  in the busybox examples.
-
 endmenu