udhcpc6: fix port numbers used if !FEATURE_UDHCP_PORT

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

1 files changed, 14 insertions, 14 deletions

diff --git a/networking/udhcp/d6_dhcpc.c b/networking/udhcp/d6_dhcpc.c
index c44220bf9..b0f0798e5 100644
--- a/networking/udhcp/d6_dhcpc.c
+++ b/networking/udhcp/d6_dhcpc.c
@@ -311,8 +311,8 @@ static int d6_mcast_from_client_config_ifindex(struct d6_packet *packet, uint8_t
 
 	return d6_send_raw_packet(
 		packet, (end - (uint8_t*) packet),
-		/*src*/ NULL, CLIENT_PORT,
-		/*dst*/ (struct in6_addr*)FF02__1_2, SERVER_PORT, MAC_BCAST_ADDR,
+		/*src*/ NULL, CLIENT_PORT6,
+		/*dst*/ (struct in6_addr*)FF02__1_2, SERVER_PORT6, MAC_BCAST_ADDR,
 		client_config.ifindex
 	);
 }
@@ -554,8 +554,8 @@ static NOINLINE int send_d6_renew(uint32_t xid, struct in6_addr *server_ipv6, st
 	if (server_ipv6)
 		return d6_send_kernel_packet(
 			&packet, (opt_ptr - (uint8_t*) &packet),
-			our_cur_ipv6, CLIENT_PORT,
-			server_ipv6, SERVER_PORT
+			our_cur_ipv6, CLIENT_PORT6,
+			server_ipv6, SERVER_PORT6
 		);
 	return d6_mcast_from_client_config_ifindex(&packet, opt_ptr);
 }
@@ -576,8 +576,8 @@ static int send_d6_release(struct in6_addr *server_ipv6, struct in6_addr *our_cu
 	bb_info_msg("Sending release...");
 	return d6_send_kernel_packet(
 		&packet, (opt_ptr - (uint8_t*) &packet),
-		our_cur_ipv6, CLIENT_PORT,
-		server_ipv6, SERVER_PORT
+		our_cur_ipv6, CLIENT_PORT6,
+		server_ipv6, SERVER_PORT6
 	);
 }
 
@@ -614,7 +614,7 @@ static NOINLINE int d6_recv_raw_packet(struct in6_addr *peer_ipv6
 	/* make sure its the right packet for us, and that it passes sanity checks */
 	if (packet.ip6.ip6_nxt != IPPROTO_UDP
 	 || (packet.ip6.ip6_vfc >> 4) != 6
-	 || packet.udp.dest != htons(CLIENT_PORT)
+	 || packet.udp.dest != htons(CLIENT_PORT6)
 	/* || bytes > (int) sizeof(packet) - can't happen */
 	 || packet.udp.len != packet.ip6.ip6_plen
 	) {
@@ -708,7 +708,7 @@ static int d6_raw_socket(int ifindex)
 		BPF_STMT(BPF_LDX|BPF_B|BPF_MSH, 0),
 		/* load udp destination port from halfword[header_len + 2] */
 		BPF_STMT(BPF_LD|BPF_H|BPF_IND, 2),
-		/* jump to L3 if udp dport is CLIENT_PORT, else to L4 */
+		/* jump to L3 if udp dport is CLIENT_PORT6, else to L4 */
 		BPF_JUMP(BPF_JMP|BPF_JEQ|BPF_K, 68, 0, 1),
 		/* L3: accept packet */
 		BPF_STMT(BPF_RET|BPF_K, 0xffffffff),
@@ -733,7 +733,7 @@ static int d6_raw_socket(int ifindex)
 	xbind(fd, (struct sockaddr *) &sock, sizeof(sock));
 
 #if 0
-	if (CLIENT_PORT == 68) {
+	if (CLIENT_PORT6 == 546) {
 		/* Use only if standard port is in use */
 		/* Ignoring error (kernel may lack support for this) */
 		if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, &filter_prog,
@@ -761,7 +761,7 @@ static void change_listen_mode(int new_mode)
 		sockfd = -1;
 	}
 	if (new_mode == LISTEN_KERNEL)
-		sockfd = udhcp_listen_socket(/*INADDR_ANY,*/ CLIENT_PORT, client_config.interface);
+		sockfd = udhcp_listen_socket(/*INADDR_ANY,*/ CLIENT_PORT6, client_config.interface);
 	else if (new_mode != LISTEN_NONE)
 		sockfd = d6_raw_socket(client_config.ifindex);
 	/* else LISTEN_NONE: sockfd stays closed */
@@ -931,8 +931,8 @@ int udhcpc6_main(int argc UNUSED_PARAM, char **argv)
 	fd_set rfds;
 
 	/* Default options */
-	IF_FEATURE_UDHCP_PORT(SERVER_PORT = 547;)
-	IF_FEATURE_UDHCP_PORT(CLIENT_PORT = 546;)
+	IF_FEATURE_UDHCP_PORT(SERVER_PORT6 = 547;)
+	IF_FEATURE_UDHCP_PORT(CLIENT_PORT6 = 546;)
 	client_config.interface = "eth0";
 	client_config.script = CONFIG_UDHCPC_DEFAULT_SCRIPT;
 
@@ -961,8 +961,8 @@ int udhcpc6_main(int argc UNUSED_PARAM, char **argv)
 	}
 #if ENABLE_FEATURE_UDHCP_PORT
 	if (opt & OPT_P) {
-		CLIENT_PORT = xatou16(str_P);
-		SERVER_PORT = CLIENT_PORT - 1;
+		CLIENT_PORT6 = xatou16(str_P);
+		SERVER_PORT6 = CLIENT_PORT6 + 1;
 	}
 #endif
 	while (list_O) {