diff options
| -rw-r--r-- | editors/vi.c | 2 | ||||
| -rw-r--r-- | include/usage.h | 22 | ||||
| -rw-r--r-- | ipsvd/tcpsvd.c | 84 | ||||
| -rw-r--r-- | networking/udhcp/dumpleases.c | 4 |
4 files changed, 71 insertions, 41 deletions
diff --git a/editors/vi.c b/editors/vi.c index c7582bfe0..5bce4272f 100644 --- a/editors/vi.c +++ b/editors/vi.c @@ -976,7 +976,7 @@ static void colon(char * buf) } #if ENABLE_FEATURE_VI_SETOPTS argp = args; - while (*argp) { + while (*argp) { if (strncasecmp(argp, "no", 2) == 0) i = 2; // ":set noautoindent" setops(argp, "autoindent ", i, "ai", VI_AUTOINDENT); diff --git a/include/usage.h b/include/usage.h index 09b6908f9..e1fbf7599 100644 --- a/include/usage.h +++ b/include/usage.h @@ -3326,9 +3326,27 @@ USE_FEATURE_RUN_PARTS_FANCY("\n -l Prints names of all matching files even when "1\n" #define tcpsvd_trivial_usage \ - "TODO" + "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..." +/* with not-implemented options: */ +/* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [ -t sec] ip port prog..." */ #define tcpsvd_full_usage \ - "TODO" + "tcpsvd creates TCP/IP socket, binds it to host:port\n" \ + "and listens on in for incoming connections. For each connection\n" \ + "it runs prog" \ + "\n" \ + "\nip IP to listen on. '0' = 'all'" \ + "\nport Port to listen on" \ + "\nprog [arg] Program to run for each connection" \ + "\n-l name Local hostname (else looks up local hostname in DNS)" \ + "\n-u user[:group] Change to user/group after bind" \ + "\n-c n Handle up to n connections simultaneously" \ + "\n-C n[:msg] Allow only up to n connections from the same IP" \ + "\n New connections from this IP address are closed" \ + "\n immediately. 'msg' is written to the peer before close" \ + "\n-h Look up peer's hostname in DNS" \ + "\n-b n Allow a backlog of approximately n TCP SYNs" \ + "\n-E Do not set up TCP-related environment variables" \ + "\n-v Verbose" #define tftp_trivial_usage \ "[OPTION]... HOST [PORT]" diff --git a/ipsvd/tcpsvd.c b/ipsvd/tcpsvd.c index 9a0a348de..df9821652 100644 --- a/ipsvd/tcpsvd.c +++ b/ipsvd/tcpsvd.c @@ -1,15 +1,20 @@ -/* -# /usr/bin/tcpsvd -v 0 1234 true -tcpsvd: info: pid 24916 from 127.0.0.1 -tcpsvd: info: start 24916 localhost:127.0.0.1 ::127.0.0.1:47905 -tcpsvd: info: pid 24918 from 127.0.0.1 -tcpsvd: info: start 24918 localhost:127.0.0.1 ::127.0.0.1:47906 -# ./busybox tcpsvd -v 0 1234 true -tcpsvd: info: pid 24924 from 127.0.0.1 -tcpsvd: info: start 24924 localhost:1234:127.0.0.1:1234 ::127.0.0.1:47908 -tcpsvd: info: pid 24926 from 127.0.0.1 -tcpsvd: info: start 24926 localhost:1234:127.0.0.1:1234 ::127.0.0.1:47909 -*/ +/* Based on ipsvd utilities written by Gerrit Pape <pape@smarden.org> + * which are released into public domain by the author. + * Homepage: http://smarden.sunsite.dk/ipsvd/ + * + * Copyright (C) 2007 by Denis Vlasenko. + * + * Licensed under GPLv2, see file LICENSE in this tarball for details. + */ + +/* Based on ipsvd ipsvd-0.12.1. This tcpsvd accepts all options + * which are supported by one from ipsvd-0.12.1, but not all are + * functional. See help text at the end of this file for details. + * + * Code inside "#ifdef SSLSVD" is for sslsvd and is currently unused. + * Code inside #if 0" is parts of original tcpsvd which are not implemented + * for busyboxed version. + */ #include "busybox.h" #include "ipsvd_perhost.h" @@ -297,15 +302,15 @@ int tcpsvd_main(int argc, char **argv) if (!max_per_host) remote_ip = xmalloc_sockaddr2dotted_noport(&sock_adr.sa, sizeof(sock_adr)); /* else it is already done */ - + remote_port = get_nport(&sock_adr.sa); remote_port = ntohs(remote_port); - + if (verbose) { pid = getpid(); printf("%s: info: pid %d from %s\n", applet_name, pid, remote_ip); } - + if (need_addresses && (option_mask32 & OPT_h)) { remote_hostname = xmalloc_sockaddr2host(&sock_adr.sa, sizeof(sock_adr)); if (!remote_hostname) { @@ -313,7 +318,7 @@ int tcpsvd_main(int argc, char **argv) remote_hostname = (char*)""; } } - + sockadr_size = sizeof(sock_adr); /* Errors ignored (I'm not paranoid enough to imagine kernel * which doesn't know local ip) */ @@ -329,7 +334,7 @@ int tcpsvd_main(int argc, char **argv) bb_error_msg_and_die("cannot look up local hostname for %s", local_ip); } } - + if (!(option_mask32 & OPT_E)) { /* setup ucspi env */ xsetenv("PROTO", "TCP"); @@ -346,7 +351,7 @@ int tcpsvd_main(int argc, char **argv) if (cur_per_host > 0) xsetenv("TCPCONCURRENCY", utoa(cur_per_host)); } - + #if 0 if (instructs) { ac = ipsvd_check(iscdb, &inst, &match, (char*)instructs, @@ -356,11 +361,11 @@ int tcpsvd_main(int argc, char **argv) } else ac = IPSVD_DEFAULT; #endif - + if (max_per_host && verbose) printf("%s: info: concurrency %u %s %u/%u\n", applet_name, pid, remote_ip, cur_per_host, max_per_host); - + if (verbose) { printf("%s: info: start %u %s:%s :%s:%s:%u\n", applet_name, pid, @@ -445,6 +450,8 @@ host host either is a hostname, or a dotted-decimal IP address, or 0. If host is 0, tcpsvd accepts connections to any local IP address. + * busybox accepts IPv6 addresses and host:port pairs too + In this case second parameter is ignored port tcpsvd accepts connections to host:port. port may be a name from /etc/services or a number. @@ -453,14 +460,16 @@ prog tcpsvd normally runs prog, with file descriptor 0 reading from the network, and file descriptor 1 writing to the network. By default it also sets up TCP-related environment variables, - see tcp-environ(5) + see tcp-environ(5) -i dir read instructions for handling new connections from the instructions - directory dir. See ipsvd-instruct(5) for details. + directory dir. See ipsvd-instruct(5) for details. + * ignored by busyboxed version -x cdb read instructions for handling new connections from the constant database cdb. The constant database normally is created from an instructions - directory by running ipsvd-cdb(8). + directory by running ipsvd-cdb(8). + * ignored by busyboxed version -t sec timeout. This option only takes effect if the -i option is given. While checking the instructions directory, check the time of last access @@ -468,47 +477,50 @@ prog and remove the file if it wasn't accessed within the last sec seconds; tcpsvd does not discard or remove a file if the user's write permission is not set, for those files the timeout is disabled. Default is 0, - which means that the timeout is disabled. + which means that the timeout is disabled. + * ignored by busyboxed version -l name local hostname. Do not look up the local hostname in DNS, but use name as hostname. This option must be set if tcpsvd listens on port 53 - to avoid loops. + to avoid loops. -u user[:group] drop permissions. Switch user ID to user's UID, and group ID to user's primary GID after creating and binding to the socket. If user is followed by a colon and a group name, the group ID is switched to the GID of group - instead. All supplementary groups are removed. + instead. All supplementary groups are removed. -c n concurrency. Handle up to n connections simultaneously. Default is 30. If there are n connections active, tcpsvd defers acceptance of a new - connection until an active connection is closed. + connection until an active connection is closed. -C n[:msg] per host concurrency. Allow only up to n connections from the same IP - address simultaneously. If there are n active connections from one IP + address simultaneously. If there are n active connections from one IP address, new incoming connections from this IP address are closed - immediately. If n is followed by :msg, the message msg is written + immediately. If n is followed by :msg, the message msg is written to the client if possible, before closing the connection. By default msg is empty. See ipsvd-instruct(5) for supported escape sequences in msg. For each accepted connection, the current per host concurrency is available through the environment variable TCPCONCURRENCY. n and msg can be overwritten by ipsvd(7) instructions, see ipsvd-instruct(5). - By default tcpsvd doesn't keep track of connections. + By default tcpsvd doesn't keep track of connections. -h - Look up the client's hostname in DNS. + Look up the client's hostname in DNS. -p paranoid. After looking up the client's hostname in DNS, look up the IP addresses in DNS for that hostname, and forget about the hostname if none of the addresses match the client's IP address. You should set this option if you use hostname based instructions. The -p option - implies the -h option. + implies the -h option. + * ignored by busyboxed version -b n backlog. Allow a backlog of approximately n TCP SYNs. On some systems n - is silently limited. Default is 20. + is silently limited. Default is 20. -E - no special environment. Do not set up TCP-related environment variables. + no special environment. Do not set up TCP-related environment variables. -v - verbose. Print verbose messsages to standard output. + verbose. Print verbose messsages to standard output. -vv - more verbose. Print more verbose messages to standard output. + more verbose. Print more verbose messages to standard output. + * no difference between -v and -vv in busyboxed version */ diff --git a/networking/udhcp/dumpleases.c b/networking/udhcp/dumpleases.c index 80cf5b8f5..507663fd9 100644 --- a/networking/udhcp/dumpleases.c +++ b/networking/udhcp/dumpleases.c @@ -23,14 +23,14 @@ int dumpleases_main(int argc, char *argv[]) OPT_r = 0x2, // -r OPT_f = 0x4, // -f }; -#if ENABLE_GETOPT_LONG +#if ENABLE_GETOPT_LONG static const struct option options[] = { { "absolute", no_argument, 0, 'a' }, { "remaining", no_argument, 0, 'r' }, { "file", required_argument, 0, 'f' }, { NULL, 0, 0, 0 } }; - + applet_long_options = options; #endif opt_complementary = "=0:?:a--r:r--a"; |