1 files changed, 0 insertions, 263 deletions
diff --git a/e2fsprogs/old_e2fsprogs/util.c b/e2fsprogs/old_e2fsprogs/util.c
deleted file mode 100644
index 3e7ee8e75..000000000
--- a/e2fsprogs/old_e2fsprogs/util.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/* vi: set sw=4 ts=4: */
-/*
- * util.c --- helper functions used by tune2fs and mke2fs
- *
- * Copyright 1995, 1996, 1997, 1998, 1999, 2000 by Theodore Ts'o.
- *
- * Licensed under GPLv2, see file LICENSE in this source tree.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <linux/major.h>
-#include <sys/stat.h>
-
-#include "e2fsbb.h"
-#include "e2p/e2p.h"
-#include "ext2fs/ext2_fs.h"
-#include "ext2fs/ext2fs.h"
-#include "blkid/blkid.h"
-#include "util.h"
-
-void proceed_question(void)
-{
-	fputs("Proceed anyway? (y,n) ", stdout);
-	if (bb_ask_confirmation() == 0)
-		exit(1);
-}
-
-void check_plausibility(const char *device, int force)
-{
-	int val;
-	struct stat s;
-	val = stat(device, &s);
-	if (force)
-		return;
-	if (val == -1)
-		bb_perror_msg_and_die("can't stat '%s'", device);
-	if (!S_ISBLK(s.st_mode)) {
-		printf("%s is not a block special device.\n", device);
-		proceed_question();
-		return;
-	}
-
-#ifdef HAVE_LINUX_MAJOR_H
-#ifndef MAJOR
-#define MAJOR(dev)	((dev)>>8)
-#define MINOR(dev)	((dev) & 0xff)
-#endif
-#ifndef SCSI_BLK_MAJOR
-#ifdef SCSI_DISK0_MAJOR
-#ifdef SCSI_DISK8_MAJOR
-#define SCSI_DISK_MAJOR(M) ((M) == SCSI_DISK0_MAJOR || \
-  ((M) >= SCSI_DISK1_MAJOR && (M) <= SCSI_DISK7_MAJOR) || \
-  ((M) >= SCSI_DISK8_MAJOR && (M) <= SCSI_DISK15_MAJOR))
-#else
-#define SCSI_DISK_MAJOR(M) ((M) == SCSI_DISK0_MAJOR || \
-  ((M) >= SCSI_DISK1_MAJOR && (M) <= SCSI_DISK7_MAJOR))
-#endif /* defined(SCSI_DISK8_MAJOR) */
-#define SCSI_BLK_MAJOR(M) (SCSI_DISK_MAJOR((M)) || (M) == SCSI_CDROM_MAJOR)
-#else
-#define SCSI_BLK_MAJOR(M)  ((M) == SCSI_DISK_MAJOR || (M) == SCSI_CDROM_MAJOR)
-#endif /* defined(SCSI_DISK0_MAJOR) */
-#endif /* defined(SCSI_BLK_MAJOR) */
-	if (((MAJOR(s.st_rdev) == HD_MAJOR &&
-	      MINOR(s.st_rdev)%64 == 0) ||
-	     (SCSI_BLK_MAJOR(MAJOR(s.st_rdev)) &&
-	      MINOR(s.st_rdev)%16 == 0))) {
-		printf("%s is entire device, not just one partition!\n", device);
-		proceed_question();
-	}
-#endif
-}
-
-void check_mount(const char *device, int force, const char *type)
-{
-	errcode_t retval;
-	int mount_flags;
-
-	retval = ext2fs_check_if_mounted(device, &mount_flags);
-	if (retval) {
-		bb_error_msg("can't determine if %s is mounted", device);
-		return;
-	}
-	if (mount_flags & EXT2_MF_MOUNTED) {
-		bb_error_msg("%s is mounted !", device);
-force_check:
-		if (force)
-			bb_error_msg("badblocks forced anyways");
-		else
-			bb_error_msg_and_die("it's not safe to run badblocks!");
-	}
-
-	if (mount_flags & EXT2_MF_BUSY) {
-		bb_error_msg("%s is apparently in use by the system", device);
-		goto force_check;
-	}
-}
-
-void parse_journal_opts(char **journal_device, int *journal_flags,
-			int *journal_size, const char *opts)
-{
-	char *buf, *token, *next, *p, *arg;
-	int journal_usage = 0;
-	buf = xstrdup(opts);
-	for (token = buf; token && *token; token = next) {
-		p = strchr(token, ',');
-		next = 0;
-		if (p) {
-			*p = 0;
-			next = p+1;
-		}
-		arg = strchr(token, '=');
-		if (arg) {
-			*arg = 0;
-			arg++;
-		}
-		if (strcmp(token, "device") == 0) {
-			*journal_device = blkid_get_devname(NULL, arg, NULL);
-			if (!*journal_device) {
-				journal_usage++;
-				continue;
-			}
-		} else if (strcmp(token, "size") == 0) {
-			if (!arg) {
-				journal_usage++;
-				continue;
-			}
-			(*journal_size) = strtoul(arg, &p, 0);
-			if (*p)
-				journal_usage++;
-		} else if (strcmp(token, "v1_superblock") == 0) {
-			(*journal_flags) |= EXT2_MKJOURNAL_V1_SUPER;
-			continue;
-		} else
-			journal_usage++;
-	}
-	if (journal_usage)
-		bb_error_msg_and_die(
-			"\nBad journal options specified.\n\n"
-			"Journal options are separated by commas, "
-			"and may take an argument which\n"
-			"\tis set off by an equals ('=') sign.\n\n"
-			"Valid journal options are:\n"
-			"\tsize=<journal size in megabytes>\n"
-			"\tdevice=<journal device>\n\n"
-			"The journal size must be between "
-			"1024 and 102400 filesystem blocks.\n\n");
-}
-
-/*
- * Determine the number of journal blocks to use, either via
- * user-specified # of megabytes, or via some intelligently selected
- * defaults.
- *
- * Find a reasonable journal file size (in blocks) given the number of blocks
- * in the filesystem.  For very small filesystems, it is not reasonable to
- * have a journal that fills more than half of the filesystem.
- */
-int figure_journal_size(int size, ext2_filsys fs)
-{
-	blk_t j_blocks;
-
-	if (fs->super->s_blocks_count < 2048) {
-		bb_error_msg("Filesystem too small for a journal");
-		return 0;
-	}
-
-	if (size >= 0) {
-		j_blocks = size * 1024 / (fs->blocksize	/ 1024);
-		if (j_blocks < 1024 || j_blocks > 102400)
-			bb_error_msg_and_die("\nThe requested journal "
-				"size is %d blocks;\n it must be "
-				"between 1024 and 102400 blocks; Aborting",
-				j_blocks);
-		if (j_blocks > fs->super->s_free_blocks_count)
-			bb_error_msg_and_die("Journal size too big for filesystem");
-		return j_blocks;
-	}
-
-	if (fs->super->s_blocks_count < 32768)
-		j_blocks = 1024;
-	else if (fs->super->s_blocks_count < 256*1024)
-		j_blocks = 4096;
-	else if (fs->super->s_blocks_count < 512*1024)
-		j_blocks = 8192;
-	else if (fs->super->s_blocks_count < 1024*1024)
-		j_blocks = 16384;
-	else
-		j_blocks = 32768;
-
-	return j_blocks;
-}
-
-void print_check_message(ext2_filsys fs)
-{
-	printf("This filesystem will be automatically "
-		 "checked every %d mounts or\n"
-		 "%g days, whichever comes first.  "
-		 "Use tune2fs -c or -i to override.\n",
-	       fs->super->s_max_mnt_count,
-	       (double)fs->super->s_checkinterval / (3600 * 24));
-}
-
-void make_journal_device(char *journal_device, ext2_filsys fs, int quiet, int force)
-{
-	errcode_t	retval;
-	ext2_filsys	jfs;
-	io_manager	io_ptr;
-
-	check_plausibility(journal_device, force);
-	check_mount(journal_device, force, "journal");
-	io_ptr = unix_io_manager;
-	retval = ext2fs_open(journal_device, EXT2_FLAG_RW|
-					EXT2_FLAG_JOURNAL_DEV_OK, 0,
-					fs->blocksize, io_ptr, &jfs);
-	if (retval)
-		bb_error_msg_and_die("can't journal device %s", journal_device);
-	if (!quiet)
-		printf("Adding journal to device %s: ", journal_device);
-	fflush(stdout);
-	retval = ext2fs_add_journal_device(fs, jfs);
-	if (retval)
-		bb_error_msg_and_die("\nFailed to add journal to device %s", journal_device);
-	if (!quiet)
-		puts("done");
-	ext2fs_close(jfs);
-}
-
-void make_journal_blocks(ext2_filsys fs, int journal_size, int journal_flags, int quiet)
-{
-	unsigned long journal_blocks;
-	errcode_t	retval;
-
-	journal_blocks = figure_journal_size(journal_size, fs);
-	if (!journal_blocks) {
-		fs->super->s_feature_compat &=
-			~EXT3_FEATURE_COMPAT_HAS_JOURNAL;
-		return;
-	}
-	if (!quiet)
-		printf("Creating journal (%lu blocks): ", journal_blocks);
-	fflush(stdout);
-	retval = ext2fs_add_journal_inode(fs, journal_blocks,
-						  journal_flags);
-	if (retval)
-		bb_error_msg_and_die("can't create journal");
-	if (!quiet)
-		puts("done");
-}
-
-char *e2fs_set_sbin_path(void)
-{
-	char *oldpath = getenv("PATH");
-	/* Update our PATH to include /sbin  */
-#define PATH_SET "/sbin"
-	if (oldpath)
-		oldpath = xasprintf("%s:%s", PATH_SET, oldpath);
-	 else
-		oldpath = PATH_SET;
-	putenv(oldpath);
-	return oldpath;
-}