diff options
Diffstat (limited to 'util-linux/Config.in')
| -rw-r--r-- | util-linux/Config.in | 156 |
1 files changed, 78 insertions, 78 deletions
diff --git a/util-linux/Config.in b/util-linux/Config.in index a215e250f..a6640e19d 100644 --- a/util-linux/Config.in +++ b/util-linux/Config.in @@ -5,7 +5,7 @@ menu "Linux System Utilities" -config CONFIG_DMESG +config DMESG bool "dmesg" default n help @@ -17,10 +17,10 @@ config CONFIG_DMESG are also logged to the system console. Enable this option if you wish to enable the 'dmesg' utility. -config CONFIG_FEATURE_DMESG_PRETTY +config FEATURE_DMESG_PRETTY bool "pretty dmesg output" default y - depends on CONFIG_DMESG + depends on DMESG help If you wish to scrub the syslog level from the output, say 'Y' here. The syslog level is a string prefixed to every line with the form "<#>". @@ -37,7 +37,7 @@ config CONFIG_FEATURE_DMESG_PRETTY <6>BIOS-provided physical RAM map: <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) -config CONFIG_FBSET +config FBSET bool "fbset" default n help @@ -46,26 +46,26 @@ config CONFIG_FBSET interface to access a graphics display. Enable this option if you wish to enable the 'fbset' utility. -config CONFIG_FEATURE_FBSET_FANCY +config FEATURE_FBSET_FANCY bool "Turn on extra fbset options" default n - depends on CONFIG_FBSET + depends on FBSET help This option enables extended fbset options, allowing one to set the framebuffer size, color depth, etc. interface to access a graphics display. Enable this option if you wish to enable extended fbset options. -config CONFIG_FEATURE_FBSET_READMODE +config FEATURE_FBSET_READMODE bool "Turn on fbset readmode support" default n - depends on CONFIG_FBSET + depends on FBSET help This option allows fbset to read the video mode database stored by default as /etc/fb.modes, which can be used to set frame buffer device to pre-defined video modes. -config CONFIG_FDFLUSH +config FDFLUSH bool "fdflush" default n help @@ -77,13 +77,13 @@ config CONFIG_FDFLUSH you change a disk. Most people have working hardware and can safely leave this disabled. -config CONFIG_FDFORMAT +config FDFORMAT bool "fdformat" default n help fdformat is used to low-level format a floppy disk. -config CONFIG_FDISK +config FDISK bool "fdisk" default n help @@ -95,62 +95,62 @@ config CONFIG_FDISK config FDISK_SUPPORT_LARGE_DISKS bool "support over 4GB disks" default y - depends on CONFIG_FDISK + depends on FDISK help Enable this option to support large disks > 4GB. -config CONFIG_FEATURE_FDISK_WRITABLE +config FEATURE_FDISK_WRITABLE bool "Write support" default y - depends on CONFIG_FDISK + depends on FDISK help Enabling this option allows you to create or change a partition table and write those changes out to disk. If you leave this option disabled, you will only be able to view the partition table. -config CONFIG_FEATURE_AIX_LABEL +config FEATURE_AIX_LABEL bool "Support AIX disklabels" default n - depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE + depends on FDISK && FEATURE_FDISK_WRITABLE help Enabling this option allows you to create or change AIX disklabels. Most people can safely leave this option disabled. -config CONFIG_FEATURE_SGI_LABEL +config FEATURE_SGI_LABEL bool "Support SGI disklabels" default n - depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE + depends on FDISK && FEATURE_FDISK_WRITABLE help Enabling this option allows you to create or change SGI disklabels. Most people can safely leave this option disabled. -config CONFIG_FEATURE_SUN_LABEL +config FEATURE_SUN_LABEL bool "Support SUN disklabels" default n - depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE + depends on FDISK && FEATURE_FDISK_WRITABLE help Enabling this option allows you to create or change SUN disklabels. Most people can safely leave this option disabled. -config CONFIG_FEATURE_OSF_LABEL +config FEATURE_OSF_LABEL bool "Support BSD disklabels" default n - depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE + depends on FDISK && FEATURE_FDISK_WRITABLE help Enabling this option allows you to create or change BSD disklabels and define and edit BSD disk slices. -config CONFIG_FEATURE_FDISK_ADVANCED +config FEATURE_FDISK_ADVANCED bool "Support expert mode" default n - depends on CONFIG_FDISK && CONFIG_FEATURE_FDISK_WRITABLE + depends on FDISK && FEATURE_FDISK_WRITABLE help Enabling this option allows you to do terribly unsafe things like define arbitrary drive geometry, move the beginning of data in a partition, and similarly evil things. Unless you have a very good reason you would be wise to leave this disabled. -config CONFIG_FREERAMDISK +config FREERAMDISK bool "freeramdisk" default n help @@ -161,7 +161,7 @@ config CONFIG_FREERAMDISK ramdisk. If you have no use for freeing memory from a ramdisk, leave this disabled. -config CONFIG_FSCK_MINIX +config FSCK_MINIX bool "fsck_minix" default n help @@ -172,7 +172,7 @@ config CONFIG_FSCK_MINIX check for and attempt to repair any corruption that occurs to a minix filesystem. -config CONFIG_MKFS_MINIX +config MKFS_MINIX bool "mkfs_minix" default n help @@ -181,18 +181,18 @@ config CONFIG_MKFS_MINIX this utility will do the job for you. comment "Minix filesystem support" - depends on CONFIG_FSCK_MINIX || CONFIG_MKFS_MINIX + depends on FSCK_MINIX || MKFS_MINIX -config CONFIG_FEATURE_MINIX2 +config FEATURE_MINIX2 bool "Support Minix fs v2 (fsck_minix/mkfs_minix)" default y - depends on CONFIG_FSCK_MINIX || CONFIG_MKFS_MINIX + depends on FSCK_MINIX || MKFS_MINIX help If you wish to be able to create version 2 minix filesystems, enable this. If you enabled 'mkfs_minix' then you almost certainly want to be using the version 2 filesystem support. -config CONFIG_GETOPT +config GETOPT bool "getopt" default n help @@ -203,14 +203,14 @@ config CONFIG_GETOPT written by others, this utility may be for you. Most people will wisely leave this disabled. -config CONFIG_HEXDUMP +config HEXDUMP bool "hexdump" default n help The hexdump utility is used to display binary data in a readable way that is comparable to the output from most hex editors. -config CONFIG_HWCLOCK +config HWCLOCK bool "hwclock" default n help @@ -219,19 +219,19 @@ config CONFIG_HWCLOCK shutdown in the hardware clock, so the hardware will keep the correct time when Linux is _not_ running. -config CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS +config FEATURE_HWCLOCK_LONG_OPTIONS bool "Support long options (--hctosys,...)" default n - depends on CONFIG_HWCLOCK && CONFIG_GETOPT_LONG + depends on HWCLOCK && GETOPT_LONG help By default, the hwclock utility only uses short options. If you are overly fond of its long options, such as --hctosys, --utc, etc) then enable this option. -config CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS +config FEATURE_HWCLOCK_ADJTIME_FHS bool "Use FHS /var/lib/hwclock/adjtime" default y - depends on CONFIG_HWCLOCK + depends on HWCLOCK help Starting with FHS 2.3, the adjtime state file is supposed to exist at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish @@ -240,24 +240,24 @@ config CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO -config CONFIG_IPCRM +config IPCRM bool "ipcrm" default n - select CONFIG_FEATURE_SUID + select FEATURE_SUID help The ipcrm utility allows the removal of System V interprocess communication (IPC) objects and the associated data structures from the system. -config CONFIG_IPCS +config IPCS bool "ipcs" default n - select CONFIG_FEATURE_SUID + select FEATURE_SUID help The ipcs utility is used to provide information on the currently allocated System V interprocess (IPC) objects in the system. -config CONFIG_LOSETUP +config LOSETUP bool "losetup" default n help @@ -265,7 +265,7 @@ config CONFIG_LOSETUP file or block device, and to query the status of a loop device. This version does not currently support enabling data encryption. -config CONFIG_MDEV +config MDEV bool "mdev" default n help @@ -274,10 +274,10 @@ config CONFIG_MDEV have it handle hotplug events afterwards. Device names are taken from sysfs. -config CONFIG_FEATURE_MDEV_CONF +config FEATURE_MDEV_CONF bool "Support /etc/mdev.conf" default n - depends on CONFIG_MDEV + depends on MDEV help The mdev config file contains lines that look like: @@ -289,10 +289,10 @@ config CONFIG_FEATURE_MDEV_CONF entry is matched, devices are created with default 0:0 660. (Make the last line match .* to override this.) -config CONFIG_FEATURE_MDEV_EXEC +config FEATURE_MDEV_EXEC bool "Support command execution at device addition/removal" default n - depends on CONFIG_FEATURE_MDEV_CONF + depends on FEATURE_MDEV_CONF help This adds support for an optional field to /etc/mdev.conf, consisting of a special character and a command line to run after creating the @@ -310,7 +310,7 @@ config CONFIG_FEATURE_MDEV_EXEC Commands are executed via system() so you need /bin/sh, meaning you probably want to select a default shell in the Shells menu. -config CONFIG_MKSWAP +config MKSWAP bool "mkswap" default n help @@ -323,17 +323,17 @@ config CONFIG_MKSWAP Once you have created swap space using 'mkswap' you need to enable the swap space using the 'swapon' utility. -config CONFIG_FEATURE_MKSWAP_V0 +config FEATURE_MKSWAP_V0 bool "version 0 support" default n - depends on CONFIG_MKSWAP -# depends on CONFIG_MKSWAP && CONFIG_DEPRECATED + depends on MKSWAP +# depends on MKSWAP && DEPRECATED help Enable support for the old v0 style. If your kernel is older than 2.1.117, then v0 support is the only option. -config CONFIG_MORE +config MORE bool "more" default n help @@ -343,10 +343,10 @@ config CONFIG_MORE you will probably find this utility very helpful. If you don't have any need to reading text files, you can leave this disabled. -config CONFIG_FEATURE_USE_TERMIOS +config FEATURE_USE_TERMIOS bool "Use termios to manipulate the screen" default y - depends on CONFIG_MORE + depends on MORE help This option allows utilities such as 'more' and 'top' to determine the size of the screen. If you leave this disabled, your utilities @@ -354,7 +354,7 @@ config CONFIG_FEATURE_USE_TERMIOS will be unable to determine the current screen size, and will be unable to move the cursor. -config CONFIG_MOUNT +config MOUNT bool "mount" default n help @@ -365,23 +365,23 @@ config CONFIG_MOUNT NFS filesystems. Most people using BusyBox will also want to enable the 'mount' utility. -config CONFIG_FEATURE_MOUNT_NFS +config FEATURE_MOUNT_NFS bool "Support mounting NFS file systems" default n - depends on CONFIG_MOUNT - select CONFIG_FEATURE_SYSLOG + depends on MOUNT + select FEATURE_SYSLOG help Enable mounting of NFS file systems. -config CONFIG_FEATURE_MOUNT_CIFS +config FEATURE_MOUNT_CIFS bool "Support mounting CIFS/SMB file systems" default n - depends on CONFIG_MOUNT + depends on MOUNT help Enable support for samba mounts. -config CONFIG_FEATURE_MOUNT_FLAGS - depends on CONFIG_MOUNT +config FEATURE_MOUNT_FLAGS + depends on MOUNT bool "Support lots of -o flags in mount" default y help @@ -390,14 +390,14 @@ config CONFIG_FEATURE_MOUNT_FLAGS noatime, diratime, nodiratime, loud, bind, move, shared, slave, private, unbindable, rshared, rslave, rprivate, and runbindable. -config CONFIG_FEATURE_MOUNT_FSTAB - depends on CONFIG_MOUNT +config FEATURE_MOUNT_FSTAB + depends on MOUNT bool "Support /etc/fstab and -a" default y help Support mount all and looking for files in /etc/fstab. -config CONFIG_PIVOT_ROOT +config PIVOT_ROOT bool "pivot_root" default n help @@ -409,7 +409,7 @@ config CONFIG_PIVOT_ROOT Note: This is for initrd in linux 2.4. Under initramfs (introduced in linux 2.6) use switch_root instead. -config CONFIG_RDATE +config RDATE bool "rdate" default n help @@ -418,13 +418,13 @@ config CONFIG_RDATE the RFC868 protocol, which is built into the inetd daemon on most systems. -config CONFIG_READPROFILE +config READPROFILE bool "readprofile" default n help This allows you to parse /proc/profile for basic profiling. -config CONFIG_SETARCH +config SETARCH bool "setarch" default n help @@ -433,7 +433,7 @@ config CONFIG_SETARCH this util on a system that supports both 64bit and 32bit userland (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...). -config CONFIG_SWAPONOFF +config SWAPONOFF bool "swaponoff" default n help @@ -444,7 +444,7 @@ config CONFIG_SWAPONOFF space. If you are not using any swap space, you can leave this option disabled. -config CONFIG_SWITCH_ROOT +config SWITCH_ROOT bool "switch_root" default n help @@ -463,7 +463,7 @@ config CONFIG_SWITCH_ROOT and ending point for searching through the kernel's doubly linked list of active mount points. That's why. -config CONFIG_UMOUNT +config UMOUNT bool "umount" default n help @@ -472,20 +472,20 @@ config CONFIG_UMOUNT the tool to use. If you enabled the 'mount' utility, you almost certainly also want to enable 'umount'. -config CONFIG_FEATURE_UMOUNT_ALL +config FEATURE_UMOUNT_ALL bool "umount -a option" default n - depends on CONFIG_UMOUNT + depends on UMOUNT help Support -a option to unmount all currently mounted filesystems. comment "Common options for mount/umount" - depends on CONFIG_MOUNT || CONFIG_UMOUNT + depends on MOUNT || UMOUNT -config CONFIG_FEATURE_MOUNT_LOOP +config FEATURE_MOUNT_LOOP bool "Support loopback mounts" default n - depends on CONFIG_MOUNT || CONFIG_UMOUNT + depends on MOUNT || UMOUNT help Enabling this feature allows automatic mounting of files (containing filesystem images) via the linux kernel's loopback devices. The mount @@ -498,10 +498,10 @@ config CONFIG_FEATURE_MOUNT_LOOP specify an offset or cryptographic options to the loopback device. (If you don't want umount to free the loop device, use "umount -D".) -config CONFIG_FEATURE_MTAB_SUPPORT +config FEATURE_MTAB_SUPPORT bool "Support for the old /etc/mtab file" default n - depends on CONFIG_MOUNT || CONFIG_UMOUNT + depends on MOUNT || UMOUNT help Historically, Unix systems kept track of the currently mounted partitions in the file "/etc/mtab". These days, the kernel exports |