path: root/include/usage.h

#define addgroup_trivial_usage \
	"[OPTIONS] group_name [user_name]"
#define addgroup_full_usage \
	"Adds a group to the system" \
	"Options:\n" \
	    "\t-g\t\tspecify gid\n"

#define adduser_trivial_usage \
	"[OPTIONS] user_name"
#define adduser_full_usage \
	"Adds a user to the system" \
	"Options:\n" \
	    "\t-h DIR\t\tAssign home directory DIR\n" \
	    "\t-g GECOS\t\tAssign gecos field GECOS\n" \
	    "\t-s SHELL\t\tAssign login shell SHELL\n" \
	    "\t-G\t\tAdd the user to existing group GROUP\n" \
	    "\t-S\t\tcreate a system user (ignored)\n" \
	    "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
	    "\t-H\t\tDo not create the home directory\n"

#define adjtimex_trivial_usage \
	"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
#define adjtimex_full_usage \
	"Reads and optionally sets system timebase parameters.\n" \
	"See adjtimex(2).\n\n" \
	"Options:\n" \
	"\t-q\t\tquiet mode - do not print\n" \
	"\t-o offset\ttime offset, microseconds\n" \
	"\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
	"\t\t\t(positive values make the system clock run fast)\n" \
	"\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
	"\t-p timeconstant\n"

#define ar_trivial_usage \
	"-[ov][ptx] ARCHIVE FILES"
#define ar_full_usage \
	"Extract or list FILES from an ar archive.\n\n" \
	"Options:\n" \
	"\t-o\t\tpreserve original dates\n" \
	"\t-p\t\textract to stdout\n" \
	"\t-t\t\tlist\n" \
	"\t-x\t\textract\n" \
	"\t-v\t\tverbosely list files processed\n"

#define arping_trivial_usage \
	"[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
#define arping_full_usage \
	"Ping hosts by ARP requests/replies.\n\n" \
	"Options:\n" \
	"\t-f\t\tQuit on first ARP reply\n" \
	"\t-q\t\tBe quiet\n" \
	"\t-b\t\tKeep broadcasting, don't go unicast\n" \
	"\t-D\t\tDuplicated address detection mode\n" \
	"\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \
	"\t-A\t\tARP answer mode, update your neighbours\n" \
	"\t-c count\tStop after sending count ARP request packets\n" \
	"\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
	"\t-I device\tOutgoing interface name, default is eth0\n" \
	"\t-s sender\tSet specific sender IP address\n" \
	"\ttarget\t\tTarget IP address of ARP request\n"

#define	awk_trivial_usage \
	"[-v var=val][-F sep] { -f progname | 'programtext' } [FILE ...]"
#define	awk_full_usage \
	"Options:\n" \
	"\t-v var=val\tassign value 'val' to variable 'var'\n" \
	"\t-F sep\t\tuse 'sep' as field separator\n" \
	"\t-f progname\tread program source from file 'progname'\n"

#define basename_trivial_usage \
	"FILE [SUFFIX]"
#define basename_full_usage \
	"Strips directory path and suffixes from FILE.\n" \
	"If specified, also removes any trailing SUFFIX."
#define basename_example_usage \
	"$ basename /usr/local/bin/foo\n" \
	"foo\n" \
	"$ basename /usr/local/bin/\n" \
	"bin\n" \
	"$ basename /foo/bar.txt .txt\n" \
	"bar"

#define bunzip2_trivial_usage \
	"[OPTION]... [FILE]"
#define bunzip2_full_usage \
	"Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
	"Options:\n" \
	"\t-c\tWrite output to standard output\n" \
	"\t-f\tForce"

#define bzcat_trivial_usage \
	"FILE"
#define bzcat_full_usage \
	"Uncompress to stdout."

#define cal_trivial_usage \
       "[-jy] [[month] year]"
#define cal_full_usage \
       "Display a calendar.\n" \
       "\nOptions:\n" \
       "\t-j\tUse julian dates.\n" \
       "\t-y\tDisplay the entire year."

#define cat_trivial_usage \
	"[-u] [FILE]..."
#define cat_full_usage \
	"Concatenates FILE(s) and prints them to stdout.\n\n" \
	"Options:\n" \
	"\t-u\tignored since unbuffered i/o is always used"
#define cat_example_usage \
	"$ cat /proc/uptime\n" \
	"110716.72 17.67"

#define chgrp_trivial_usage \
	"[OPTION]... GROUP FILE..."
#define chgrp_full_usage \
	"Change the group membership of each FILE to GROUP.\n" \
	"\nOptions:\n" \
	"\t-R\tChanges files and directories recursively."
#define chgrp_example_usage \
	"$ ls -l /tmp/foo\n" \
	"-r--r--r--    1 andersen andersen        0 Apr 12 18:25 /tmp/foo\n" \
	"$ chgrp root /tmp/foo\n" \
	"$ ls -l /tmp/foo\n" \
	"-r--r--r--    1 andersen root            0 Apr 12 18:25 /tmp/foo\n"

#define chmod_trivial_usage \
	"[-R] MODE[,MODE]... FILE..."
#define chmod_full_usage \
	"Each MODE is one or more of the letters ugoa, one of the\n" \
	"symbols +-= and one or more of the letters rwxst.\n\n" \
	"Options:\n" \
	"\t-R\tChanges files and directories recursively."
#define chmod_example_usage \
	"$ ls -l /tmp/foo\n" \
	"-rw-rw-r--    1 root     root            0 Apr 12 18:25 /tmp/foo\n" \
	"$ chmod u+x /tmp/foo\n" \
	"$ ls -l /tmp/foo\n" \
	"-rwxrw-r--    1 root     root            0 Apr 12 18:25 /tmp/foo*\n" \
	"$ chmod 444 /tmp/foo\n" \
	"$ ls -l /tmp/foo\n" \
	"-r--r--r--    1 root     root            0 Apr 12 18:25 /tmp/foo\n"

#define chown_trivial_usage \
	"[ -Rh ]...  OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
	"Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
	"\nOptions:\n" \
	"\t-R\tChanges files and directories recursively.\n" \
	"\t-h\tDo not dereference symbolic links."
#define chown_example_usage \
	"$ ls -l /tmp/foo\n" \
	"-r--r--r--    1 andersen andersen        0 Apr 12 18:25 /tmp/foo\n" \
	"$ chown root /tmp/foo\n" \
	"$ ls -l /tmp/foo\n" \
	"-r--r--r--    1 root     andersen        0 Apr 12 18:25 /tmp/foo\n" \
	"$ chown root.root /tmp/foo\n" \
	"ls -l /tmp/foo\n" \
	"-r--r--r--    1 root     root            0 Apr 12 18:25 /tmp/foo\n"

#define chroot_trivial_usage \
	"NEWROOT [COMMAND...]"
#define chroot_full_usage \
	"Run COMMAND with root directory set to NEWROOT."
#define chroot_example_usage \
	"$ ls -l /bin/ls\n" \
	"lrwxrwxrwx    1 root     root          12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
	"$ mount /dev/hdc1 /mnt -t minix\n" \
	"$ chroot /mnt\n" \
	"$ ls -l /bin/ls\n" \
	"-rwxr-xr-x    1 root     root        40816 Feb  5 07:45 /bin/ls*\n"

#define chvt_trivial_usage \
	"N"
#define chvt_full_usage \
	"Changes the foreground virtual terminal to /dev/ttyN"

#define clear_trivial_usage \
	""
#define clear_full_usage \
	"Clear screen."

#define cmp_trivial_usage \
	"[OPTION]... FILE1 [FILE2]"
#define cmp_full_usage \
	"Compare files.\n\n" \
	"Options:\n" \
	"\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
	"\t\t  for all differing bytes.\n" \
	"\t-s\tquiet mode - do not print"

#define cp_trivial_usage \
	"[OPTION]... SOURCE DEST"
#define cp_full_usage \
	"Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \
	"\n" \
	"\t-a\tSame as -dpR\n" \
	"\t-d\tPreserves links\n" \
	"\t-p\tPreserves file attributes if possible\n" \
	"\t-f\tforce (implied; ignored) - always set\n" \
	"\t-R\tCopies directories recursively"

#define cpio_trivial_usage \
	"-[dimtuv][F cpiofile]"
#define cpio_full_usage \
	"Extract or list files from a cpio archive\n" \
	"Main operation mode:\n" \
	"\td\t\tmake leading directories\n" \
	"\ti\t\textract\n" \
	"\tm\t\tpreserve mtime\n" \
	"\tt\t\tlist\n" \
	"\tu\t\tunconditional overwrite\n" \
	"\tF\t\tinput from file"
	
#define crond_trivial_usage \
	"-d[#] -c <crondir> -f -b"
#define crond_full_usage \
	"\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \
	"\t-d num\tdebug level\n" \
	"\t-l num\tlog level (8 - default)\n" \
	"\t-S\tlog to syslod (defualt)\n" \
	"\t-L file\tlog to file\n" \
	"\t-f\trun in fordeground\n" \
	"\t-b\trun in background (default)\n" \
	"\t-c dir\tworking dir"

#define crontab_trivial_usage \
	"crontab [-c dir] {file|-}|[-u|-l|-e|-d user]"
#define crontab_full_usage \
	"\tfile <opts>  replace crontab from file\n" \
	"\t-    <opts>  replace crontab from stdin\n" \
	"\t-u user      specify user\n" \
	"\t-l [user]    list crontab for user\n" \
	"\t-e [user]    edit crontab for user\n" \
	"\t-d [user]    delete crontab for user\n" \
	"\t-c dir       specify crontab directory"


#define cut_trivial_usage \
	"[OPTION]... [FILE]..."
#define cut_full_usage \
	"Prints selected fields from each input FILE to standard output.\n\n" \
	"Options:\n" \
	"\t-b LIST\t\tOutput only bytes from LIST\n" \
	"\t-c LIST\t\tOutput only characters from LIST\n" \
	"\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \
	"\t-s\t\tOutput only the lines containing delimiter\n" \
	"\t-f N\t\tPrint only these fields\n" \
	"\t-n\t\tIgnored"
#define cut_example_usage \
	"$ echo "Hello world" | cut -f 1 -d ' '\n" \
	"Hello\n" \
	"$ echo "Hello world" | cut -f 2 -d ' '\n" \
	"world\n"

#define date_trivial_usage \
	"[OPTION]... [+FORMAT]"
#define date_full_usage \
	"Displays the current time in the given FORMAT, or sets the system date.\n" \
	"\nOptions:\n" \
	"\t-R\t\tOutputs RFC-822 compliant date string\n" \
	"\t-d STRING\tdisplay time described by STRING, not `now'\n" \
	"\t-s\t\tSets time described by STRING\n" \
	"\t-u\t\tPrints or sets Coordinated Universal Time"
#define date_example_usage \
	"$ date\n" \
	"Wed Apr 12 18:52:41 MDT 2000\n"

#define dc_trivial_usage \
	"expression ..."
#define dc_full_usage \
	"This is a Tiny RPN calculator that understands the\n" \
	"following operations: +, -, /, *, and, or, not, eor.\n" \
	"i.e., 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16" \
	"p - Prints the value on the top of the stack, without altering the stack.\n" \
	"f - Prints the entire contents of the stack without altering anything.\n" \
	"o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
	"    Only 10 and 16 are supported.\n"

#define dc_example_usage \
	"$ dc 2 2 +\n" \
	"4\n" \
	"$ dc 8 8 * 2 2 + /\n" \
	"16\n" \
	"$ dc 0 1 and\n" \
	"0\n" \
	"$ dc 0 1 or\n" \
	"1\n" \
	"$ echo 72 9 div 8 mul | dc\n" \
	"64\n"

#define dd_trivial_usage \
	"[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \
	"\t  [seek=N] [conv=notrunc|noerror|sync]"
#define dd_full_usage \
	"Copy a file, converting and formatting according to options\n\n" \
	"\tif=FILE\t\tread from FILE instead of stdin\n" \
	"\tof=FILE\t\twrite to FILE instead of stdout\n" \
	"\tbs=N\t\tread and write N bytes at a time\n" \
	"\tcount=N\t\tcopy only N input blocks\n" \
	"\tskip=N\t\tskip N input blocks\n" \
	"\tseek=N\t\tskip N output blocks\n" \
	"\tconv=notrunc\tdon't truncate output file\n" \
	"\tconv=noerror\tcontinue after read errors\n" \
	"\tconv=sync\tpad blocks with zeros\n" \
	"\n" \
	"Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
	"MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)."
#define dd_example_usage \
	"$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
	"4+0 records in\n" \
	"4+0 records out\n"

#define deallocvt_trivial_usage \
	"N"
#define deallocvt_full_usage \
	 "Deallocate unused virtual terminal /dev/ttyN"

#define delgroup_trivial_usage \
	"GROUP"
#define delgroup_full_usage \
	 "Deletes group GROUP from the system"

#define deluser_trivial_usage \
	"USER"
#define deluser_full_usage \
	 "Deletes user USER from the system"

#ifdef CONFIG_FEATURE_HUMAN_READABLE
  #define USAGE_HUMAN_READABLE(a) a
  #define USAGE_NOT_HUMAN_READABLE(a)
#else
  #define USAGE_HUMAN_READABLE(a) 
  #define USAGE_NOT_HUMAN_READABLE(a) a
#endif
#define df_trivial_usage \
	"[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]"
#define df_full_usage \
	"Print the filesystem space used and space available.\n\n" \
	"Options:\n" \
	USAGE_HUMAN_READABLE( \
	"\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
	"\t-m\tprint sizes in megabytes\n" \
	"\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
	"\n\t-k\tprint sizes in kilobytes(compatibility)")
#define df_example_usage \
	"$ df\n" \
	"Filesystem           1k-blocks      Used Available Use% Mounted on\n" \
	"/dev/sda3              8690864   8553540    137324  98% /\n" \
	"/dev/sda1                64216     36364     27852  57% /boot\n" \
	"$ df /dev/sda3\n" \
	"Filesystem           1k-blocks      Used Available Use% Mounted on\n" \
	"/dev/sda3              8690864   8553540    137324  98% /\n"

#define dirname_trivial_usage \
	"[FILENAME ...]"
#define dirname_full_usage \
	"Strips non-directory suffix from FILENAME"
#define dirname_example_usage \
	"$ dirname /tmp/foo\n" \
	"/tmp\n" \
	"$ dirname /tmp/foo/\n" \
	"/tmp\n"

#define dmesg_trivial_usage \
	"[-c] [-n LEVEL] [-s SIZE]"
#define dmesg_full_usage \
	"Prints or controls the kernel ring buffer\n\n" \
	"Options:\n" \
	"\t-c\t\tClears the ring buffer's contents after printing\n" \
	"\t-n LEVEL\tSets console logging level\n" \
	"\t-s SIZE\t\tUse a buffer of size SIZE"

#define dos2unix_trivial_usage \
	"[option] [FILE]"
#define dos2unix_full_usage \
	"Converts FILE from dos format to unix format.  When no option\n" \
	"is given, the input is converted to the opposite output format.\n" \
	"When no file is given, uses stdin for input and stdout for output.\n\n" \
	"Options:\n" \
	"\t-u\toutput will be in UNIX format\n" \
	"\t-d\toutput will be in DOS format"

#define dpkg_trivial_usage \
	"-i package_file\n" \
	"[-CPru] package_name"
#define dpkg_full_usage \
	"\t-i\tInstall the package\n" \
	"\t-C\tConfigure an unpackaged package\n" \
	"\t-P\tPurge all files of a package\n" \
	"\t-r\tRemove all but the configuration files for a package\n" \
	"\t-u\tUnpack a package, but dont configure it\n"

#define dpkg_deb_trivial_usage \
	"[-cefItxX] FILE [argument]"
#define dpkg_deb_full_usage \
	"Perform actions on debian packages (.debs)\n\n" \
	"Options:\n" \
	"\t-c\tList contents of filesystem tree\n" \
	"\t-e\tExtract control files to [argument] directory\n" \
	"\t-f\tDisplay control field name starting with [argument]\n" \
	"\t-I\tDisplay the control filenamed [argument]\n" \
	"\t-t\tExtract filesystem tree to stdout in tar format\n" \
	"\t-x\tExtract packages filesystem tree to directory\n" \
	"\t-X\tVerbose extract"
#define dpkg_deb_example_usage \
	"$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"

#ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K
#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a
#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a)
#else
#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a)
#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a
#endif

#define du_trivial_usage \
	"[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..."
#define du_full_usage \
	"Summarizes disk space used for each FILE and/or directory.\n" \
	"Disk space is printed in units of " \
	USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \
	" bytes.\n\n" \
	"Options:\n" \
	"\t-a\tshow sizes of files in addition to directories\n" \
	"\t-H\tfollow symbolic links that are FILE command line args\n" \
	"\t-L\tfollow all symbolic links encountered\n" \
	"\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \
	"\t-c\toutput a grand total\n" \
	"\t-l\tcount sizes many times if hard linked\n" \
	"\t-s\tdisplay only a total for each argument\n" \
	"\t-x\tskip directories on different filesystems\n" \
	USAGE_HUMAN_READABLE( \
	"\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
	"\t-m\tprint sizes in megabytes\n" ) \
	"\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)")
#define du_example_usage \
	"$ du\n" \
	"16      ./CVS\n" \
	"12      ./kernel-patches/CVS\n" \
	"80      ./kernel-patches\n" \
	"12      ./tests/CVS\n" \
	"36      ./tests\n" \
	"12      ./scripts/CVS\n" \
	"16      ./scripts\n" \
	"12      ./docs/CVS\n" \
	"104     ./docs\n" \
	"2417    .\n"

#define dumpkmap_trivial_usage \
	"> keymap"
#define dumpkmap_full_usage \
	"Prints out a binary keyboard translation table to standard output."
#define dumpkmap_example_usage \
	"$ dumpkmap > keymap\n"

#define dumpleases_trivial_usage \
	"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
	"\t-f,\t--file=FILENAME\tLeases file to load\n" \
	"\t-r,\t--remaining\tInterepret lease times as time remaing\n" \
	"\t-a,\t--absolute\tInterepret lease times as expire time\n"

#define dutmp_trivial_usage \
	"[FILE]"
#define dutmp_full_usage \
	"Dump utmp file format (pipe delimited) from FILE\n" \
	"or stdin to stdout.  (i.e., 'dutmp /var/run/utmp')"
#define dutmp_example_usage \
	"$ dutmp /var/run/utmp\n" \
	"8|7||si|||0|0|0|955637625|760097|0\n" \
	"2|0|~|~~|reboot||0|0|0|955637625|782235|0\n" \
	"1|20020|~|~~|runlevel||0|0|0|955637625|800089|0\n" \
	"8|125||l4|||0|0|0|955637629|998367|0\n" \
	"6|245|tty1|1|LOGIN||0|0|0|955637630|998974|0\n" \
	"6|246|tty2|2|LOGIN||0|0|0|955637630|999498|0\n" \
	"7|336|pts/0|vt00|andersen|:0.0|0|0|0|955637763|0|0\n"

#ifdef CONFIG_FEATURE_FANCY_ECHO
  #define USAGE_FANCY_ECHO(a) a
#else
  #define USAGE_FANCY_ECHO(a) 
#endif

#define echo_trivial_usage \
	USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]"
#define echo_full_usage \
	"Prints the specified ARGs to stdout\n\n" \
	USAGE_FANCY_ECHO("Options:\n" \
	"\t-n\tsuppress trailing newline\n" \
	"\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \
	"\t-E\tdisable interpretation of backslash-escaped characters")
#define echo_example_usage \
	"$ echo "Erik is cool"\n" \
	"Erik is cool\n" \
	USAGE_FANCY_ECHO("$  echo -e "Erik\\nis\\ncool"\n" \
	"Erik\n" \
	"is\n" \
	"cool\n" \
	"$ echo "Erik\\nis\\ncool"\n" \
	"Erik\\nis\\ncool\n")

#define env_trivial_usage \
	"[-iu] [-] [name=value]... [command]"
#define env_full_usage \
	"Prints the current environment or runs a program after setting\n" \
	"up the specified environment.\n\n" \
	"Options:\n" \
	"\t-, -i\tstart with an empty environment\n" \
	"\t-u\tremove variable from the environment\n"

#define expr_trivial_usage \
	"EXPRESSION"
#define expr_full_usage \
	"Prints the value of EXPRESSION to standard output.\n\n" \
	"EXPRESSION may be:\n" \
	"\tARG1 |  ARG2	ARG1 if it is neither null nor 0, otherwise ARG2\n" \
	"\tARG1 &  ARG2	ARG1 if neither argument is null or 0, otherwise 0\n" \
	"\tARG1 <  ARG2	ARG1 is less than ARG2\n" \
	"\tARG1 <= ARG2	ARG1 is less than or equal to ARG2\n" \
	"\tARG1 =  ARG2	ARG1 is equal to ARG2\n" \
	"\tARG1 != ARG2	ARG1 is unequal to ARG2\n" \
	"\tARG1 >= ARG2	ARG1 is greater than or equal to ARG2\n" \
	"\tARG1 >  ARG2	ARG1 is greater than ARG2\n" \
	"\tARG1 +  ARG2	arithmetic sum of ARG1 and ARG2\n" \
	"\tARG1 -  ARG2	arithmetic difference of ARG1 and ARG2\n" \
	"\tARG1 *  ARG2	arithmetic product of ARG1 and ARG2\n" \
	"\tARG1 /  ARG2	arithmetic quotient of ARG1 divided by ARG2\n" \
	"\tARG1 %  ARG2	arithmetic remainder of ARG1 divided by ARG2\n" \
	"\tSTRING : REGEXP             anchored pattern match of REGEXP in STRING\n" \
	"\tmatch STRING REGEXP         same as STRING : REGEXP\n" \
	"\tsubstr STRING POS LENGTH    substring of STRING, POS counted from 1\n" \
	"\tindex STRING CHARS          index in STRING where any CHARS is found,\n" \
	"\t                            or 0\n" \
	"\tlength STRING               length of STRING\n" \
	"\tquote TOKEN                 interpret TOKEN as a string, even if\n" \
	"\t                            it is a keyword like `match' or an\n" \
	"\t                            operator like `/'\n" \
	"\t( EXPRESSION )              value of EXPRESSION\n\n" \
	"Beware that many operators need to be escaped or quoted for shells.\n" \
	"Comparisons are arithmetic if both ARGs are numbers, else\n" \
	"lexicographical.  Pattern matches return the string matched between \n" \
	"\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \
	"of characters matched or 0."

#define false_trivial_usage \
	""
#define false_full_usage \
	"Return an exit code of FALSE (1)."
#define false_example_usage \
	"$ false\n" \
	"$ echo $?\n" \
	"1\n"

#define fbset_trivial_usage \
	"[options] [mode]"
#define fbset_full_usage \
	"Show and modify frame buffer settings"
#define fbset_example_usage \
	"$ fbset\n" \
	"mode "1024x768-76"\n" \
	"\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
	"\tgeometry 1024 768 1024 768 16\n" \
	"\ttimings 12714 128 32 16 4 128 4\n" \
	"\taccel false\n" \
	"\trgba 5/11,6/5,5/0,0/0\n" \
	"endmode\n"

#define fdflush_trivial_usage \
	"DEVICE"
#define fdflush_full_usage \
	"Forces floppy disk drive to detect disk change"

#define fdisk_trivial_usage \
	"[-l] [-v] [-b SSZ] [-u] DISK"
#define fdisk_full_usage \
	"Change partition table\n" \
	"Options:\n" \
	"-l  List partition table(s)\n" \
	"-u  Give Start and End in sector (instead of cylinder) units\n" \
	"-s PARTITION  Give partition size(s) in blocks\n" \
	"-b 2048: (for certain MO disks) use 2048-byte sectors\n" \
	"-v  Give fdisk version"

#ifdef CONFIG_FEATURE_FIND_TYPE
  #define USAGE_FIND_TYPE(a) a
#else
  #define USAGE_FIND_TYPE(a)
#endif
#ifdef CONFIG_FEATURE_FIND_PERM
  #define USAGE_FIND_PERM(a) a
#else
  #define USAGE_FIND_PERM(a)
#endif
#ifdef CONFIG_FEATURE_FIND_MTIME
  #define USAGE_FIND_MTIME(a) a
#else
  #define USAGE_FIND_MTIME(a)
#endif
#ifdef CONFIG_FEATURE_FIND_NEWER
  #define USAGE_FIND_NEWER(a) a
#else
  #define USAGE_FIND_NEWER(a)
#endif
#ifdef CONFIG_FEATURE_FIND_INUM
  #define USAGE_FIND_INUM(a) a
#else
  #define USAGE_FIND_INUM(a)
#endif

#define find_trivial_usage \
	"[PATH...] [EXPRESSION]"
#define find_full_usage \
	"Search for files in a directory hierarchy.  The default PATH is\n" \
	"the current directory; default EXPRESSION is '-print'\n" \
	"\nEXPRESSION may consist of:\n" \
	"\t-follow\t\tDereference symbolic links.\n" \
	"\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \
	"\t-print\t\tPrint (default and assumed).\n" \
	USAGE_FIND_TYPE( \
	"\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \
) USAGE_FIND_PERM( \
	"\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \
) USAGE_FIND_MTIME( \
	"\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \
) USAGE_FIND_NEWER( \
	"\n\t-newer FILE\tModified time is more recent than FILE's" \
) USAGE_FIND_INUM( \
	"\n\t-inum N\t\tFile has inode number N")
#define find_example_usage \
	"$ find / -name /etc/passwd\n" \
	"/etc/passwd\n"

#define fold_trivial_usage \
	"[bsw] [FILE]"
#define fold_full_usage \
	"Wrap input lines in each FILE (standard input by default), writing to\n" \
	"standard output.\n\n" \
	"Options:\n" \
	"\t-b\tcount bytes rather than columns\n" \
	"\t-s\tbreak at spaces\n" \
	"\t-w\tuse WIDTH columns instead of 80\n"

#define free_trivial_usage \
	""
#define free_full_usage \
	"Displays the amount of free and used system memory"
#define free_example_usage \
	"$ free\n" \
	"              total         used         free       shared      buffers\n" \
	"  Mem:       257628       248724         8904        59644        93124\n" \
	" Swap:       128516         8404       120112\n" \
	"Total:       386144       257128       129016\n" \

#define freeramdisk_trivial_usage \
	"DEVICE"
#define freeramdisk_full_usage \
	"Frees all memory used by the specified ramdisk."
#define freeramdisk_example_usage \
	"$ freeramdisk /dev/ram2\n"

#define fsck_minix_trivial_usage \
	"[-larvsmf] /dev/name"
#define fsck_minix_full_usage \
	"Performs a consistency check for MINIX filesystems.\n\n" \
	"Options:\n" \
	"\t-l\tLists all filenames\n" \
	"\t-r\tPerform interactive repairs\n" \
	"\t-a\tPerform automatic repairs\n" \
	"\t-v\tverbose\n" \
	"\t-s\tOutputs super-block information\n" \
	"\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \
	"\t-f\tForce file system check."

#define ftpget_trivial_usage \
	"[options] remote-host local-directory remote-file"
#define ftpget_full_usage \
	"Retrieve a remote file via FTP.\n\n" \
	"Options:\n" \
	"\t-c, --continue         Continue a previous transfer\n" \
	"\t-v, --verbose          Verbose\n" \
	"\t-u, --username         Username to be used\n" \
	"\t-p, --password         Password to be used\n" \
	"\t-P, --port             Port number to be used\n" 

#define ftpput_trivial_usage \
	"[options] remote-host remote-directory local-file"
#define ftpput_full_usage \
	"Store a local file on a remote machine via FTP.\n\n" \
	"Options:\n" \
	"\t-v, --verbose          Verbose\n" \
	"\t-u, --username         Username to be used\n" \
	"\t-p, --password         Password to be used\n" \
	"\t-P, --port             Port number to be used\n" 

#define getopt_trivial_usage \
	"[OPTIONS]..."
#define getopt_full_usage \
	"Parse command options\n" \
	"\t-a, --alternative		Allow long options starting with single -\n" \
	"\t-l, --longoptions=longopts	Long options to be recognized\n" \
	"\t-n, --name=progname		The name under which errors are reported\n" \
	"\t-o, --options=optstring	Short options to be recognized\n" \
	"\t-q, --quiet			Disable error reporting by getopt(3)\n" \
	"\t-Q, --quiet-output		No normal output\n" \
	"\t-s, --shell=shell		Set shell quoting conventions\n" \
	"\t-T, --test			Test for getopt(1) version\n" \
	"\t-u, --unqote			Do not quote the output"
#define getopt_example_usage \
        "$ cat getopt.test\n" \
        "#!/bin/sh\n" \
        "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
        "       -n 'example.busybox' -- "$@"`\n" \
        "if [ $? != 0 ] ; then  exit 1 ; fi\n" \
        "eval set -- "$GETOPT"\n" \
        "while true ; do\n" \
        " case $1 in\n" \
        "   -a|--a-long) echo \"Option a\" ; shift ;;\n" \
        "   -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \
        "   -c|--c-long)\n" \
        "     case "$2" in\n" \
        "       \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \
        "       *)  echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \
        "     esac ;;\n" \
        "   --) shift ; break ;;\n" \
        "   *) echo \"Internal error!\" ; exit 1 ;;\n" \
        " esac\n" \
        "done\n"

#define getty_trivial_usage \
	"getty [OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
	"\nOpens a tty, prompts for a login name, then invokes /bin/login\n\n" \
	"Options:\n" \
	"\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \
	"\t-i\t\tDo not display /etc/issue before running login.\n" \
	"\t-L\t\tLocal line, so do not do carrier detect.\n" \
	"\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \
	"\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \
	"\t-n\t\tDo not prompt the user for a login name.\n" \
	"\t-f issue_file\tDisplay issue_file instead of /etc/issue.\n" \
	"\t-l login_app\tInvoke login_app instead of /bin/login.\n" \
	"\t-t timeout\tTerminate after timeout if no username is read.\n" \
	"\t-I initstring\tSets the init string to send before anything else.\n" \
	"\t-H login_host\tLog login_host into the utmp file as the hostname."


#define grep_trivial_usage \
	"[-ihHnqvs] PATTERN [FILEs...]"
#define grep_full_usage \
	"Search for PATTERN in each FILE or standard input.\n\n" \
	"Options:\n" \
	"\t-H\tprefix output lines with filename where match was found\n" \
	"\t-h\tsuppress the prefixing filename on output\n" \
	"\t-i\tignore case distinctions\n" \
	"\t-l\tlist names of files that match\n" \
	"\t-n\tprint line number with output lines\n" \
	"\t-q\tbe quiet. Returns 0 if result was found, 1 otherwise\n" \
	"\t-v\tselect non-matching lines\n" \
	"\t-s\tsuppress file open/read error messages"
#define grep_example_usage \
	"$ grep root /etc/passwd\n" \
	"root:x:0:0:root:/root:/bin/bash\n" \
	"$ grep ^[rR]oo. /etc/passwd\n" \
	"root:x:0:0:root:/root:/bin/bash\n"

#define gunzip_trivial_usage \
	"[OPTION]... FILE"
#define gunzip_full_usage \
	"Uncompress FILE (or standard input if FILE is '-').\n\n" \
	"Options:\n" \
	"\t-c\tWrite output to standard output\n" \
	"\t-t\tTest compressed file integrity"
#define gunzip_example_usage \
	"$ ls -la /tmp/BusyBox*\n" \
	"-rw-rw-r--    1 andersen andersen   557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
	"$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \
	"$ ls -la /tmp/BusyBox*\n" \
	"-rw-rw-r--    1 andersen andersen  1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n"

#define gzip_trivial_usage \
	"[OPTION]... [FILE]..."
#define gzip_full_usage \
	"Compress FILE(s) with maximum compression.\n" \
	"When FILE is '-' or unspecified, reads standard input.  Implies -c.\n\n" \
	"Options:\n" \
	"\t-c\tWrite output to standard output instead of FILE.gz\n" \
	"\t-d\tdecompress"
#define gzip_example_usage \
	"$ ls -la /tmp/busybox*\n" \
	"-rw-rw-r--    1 andersen andersen  1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
	"$ gzip /tmp/busybox.tar\n" \
	"$ ls -la /tmp/busybox*\n" \
	"-rw-rw-r--    1 andersen andersen   554058 Apr 14 17:49 /tmp/busybox.tar.gz\n"

#define halt_trivial_usage \
	""
#define halt_full_usage \
	"Halt the system."

#ifdef CONFIG_FEATURE_FANCY_HEAD
#define USAGE_FANCY_HEAD(a) a
#else
#define USAGE_FANCY_HEAD(a)
#endif

#define head_trivial_usage \
	"[OPTION]... [FILE]..."
#define head_full_usage \
	"Print first 10 lines of each FILE to standard output.\n" \
	"With more than one FILE, precede each with a header giving the\n" \
	"file name. With no FILE, or when FILE is -, read standard input.\n\n" \
	"Options:\n" \
	"\t-n NUM\t\tPrint first NUM lines instead of first 10" \
	USAGE_FANCY_HEAD( \
	"\n\t-c NUM\t\toutput the first NUM bytes\n" \
	"\t-q\t\tnever output headers giving file names\n" \
	"\t-v\t\talways output headers giving file names" )
#define head_example_usage \
	"$ head -n 2 /etc/passwd\n" \
	"root:x:0:0:root:/root:/bin/bash\n" \
	"daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n"

#define hexdump_trivial_usage \
	"[-[bcdefnosvx]] [OPTION] FILE"
#define hexdump_full_usage \
	"The hexdump utility is a filter which displays the specified files,\n" \
	"or the standard input, if no files are specified, in a user specified\n"\
	"format\n" \
	"\t-b\t\tOne-byte octal display\n" \
	"\t-c\t\tOne-byte character display\n" \
	"\t-d\t\tTwo-byte decimal display\n" \
	"\t-e FORMAT STRING\n" \
	"\t-f FORMAT FILE\n" \
	"\t-n LENGTH\tInterpret only length bytes of input\n" \
	"\t-o\t\tTwo-byte octal display\n" \
	"\t-s OFFSET\tSkip offset byte\n" \
	"\t-v\t\tdisplay all input data\n" \
	"\t-x\t\tTwo-byte hexadecimal display\n"

#define hostid_trivial_usage \
	""
#define hostid_full_usage \
	"Print out a unique 32-bit identifier for the machine."

#define hostname_trivial_usage \
	"[OPTION] {hostname | -F FILE}"
#define hostname_full_usage \
	"Get or set the hostname or DNS domain name. If a hostname is given\n" \
	"(or FILE with the -F parameter), the host name will be set.\n\n" \
	"Options:\n" \
	"\t-s\tShort\n" \
	"\t-i\tAddresses for the hostname\n" \
	"\t-d\tDNS domain name\n" \
	"\t-f\tFully qualified domain name\n" \
	"\t-F FILE\tUse the contents of FILE to specify the hostname"
#define hostname_example_usage \
	"$ hostname\n" \
	"sage \n"
#ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH
  #define USAGE_HTTPD_BASIC_AUTH(a) a
#else
  #define USAGE_HTTPD_BASIC_AUTH(a)
#endif
#define httpd_trivial_usage \
	"[-p <port>] [-d/-e <string>]" USAGE_HTTPD_BASIC_AUTH(" [-c <conf file>] [-r <realm>]")
#define httpd_full_usage \
       "Listens for incoming http server requests.\n"\
       "Options:\n" \
       "\t-p PORT\tServer port (default 80).\n" \
       USAGE_HTTPD_BASIC_AUTH("\t-c FILE\tSpecifies configuration file.  (default httpd.conf)\n\t-r REALM\tAuthentication Realm for Basic Authentication\n") \
       "\t-e STRING\tHtml encode STRING\n" \
       "\t-d STRING\tURL decode STRING\n" 
#define hwclock_trivial_usage \
	"[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
#define hwclock_full_usage \
	"Query and set the hardware clock (RTC)\n\n" \
	"Options:\n" \
	"\t-r\tread hardware clock and print result\n" \
	"\t-s\tset the system time from the hardware clock\n" \
	"\t-w\tset the hardware clock to the current system time\n" \
	"\t-u\tthe hardware clock is kept in coordinated universal time\n" \
	"\t-l\tthe hardware clock is kept in local time"

#define id_trivial_usage \
	"[OPTIONS]... [USERNAME]"
#define id_full_usage \
	"Print information for USERNAME or the current user\n\n" \
	"Options:\n" \
	"\t-g\tprints only the group ID\n" \
	"\t-u\tprints only the user ID\n" \
	"\t-n\tprint a name instead of a number (with for -ug)\n" \
	"\t-r\tprints the real user ID instead of the effective ID (with -ug)"
#define id_example_usage \
	"$ id\n" \
	"uid=1000(andersen) gid=1000(andersen)\n"

#ifdef CONFIG_FEATURE_IFCONFIG_SLIP
  #define USAGE_SIOCSKEEPALIVE(a) a
#else
  #define USAGE_SIOCSKEEPALIVE(a)
#endif
#ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
  #define USAGE_IFCONFIG_MII(a) a
#else
  #define USAGE_IFCONFIG_MII(a)
#endif
#ifdef CONFIG_FEATURE_IFCONFIG_HW
  #define USAGE_IFCONFIG_HW(a) a
#else
  #define USAGE_IFCONFIG_HW(a)
#endif
#ifdef CONFIG_FEATURE_IFCONFIG_STATUS
  #define USAGE_IFCONFIG_OPT_A(a) a
#else
  #define USAGE_IFCONFIG_OPT_A(a)
#endif
#ifdef CONFIG_FEATURE_IPV6
  #define USAGE_IPV6(a) a
#else
  #define USAGE_IPV6(a)
#endif

#define ifconfig_trivial_usage \
	USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]"
#define ifconfig_full_usage \
	"configure a network interface\n\n" \
	"Options:\n" \
	USAGE_IPV6("[add <address>[/<prefixlen>]]\n") \
	USAGE_IPV6("[del <address>[/<prefixlen>]]\n") \
	"\t[[-]broadcast [<address>]]  [[-]pointopoint [<address>]]\n" \
	"\t[netmask <address>]  [dstaddr <address>]\n" \
	USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \
	"\t" USAGE_IFCONFIG_HW("[hw ether <address>]  ") \
    "[metric <NN>]  [mtu <NN>]\n" \
	"\t[[-]trailers]  [[-]arp]  [[-]allmulti]\n" \
	"\t[multicast]  [[-]promisc]  [txqueuelen <NN>]  [[-]dynamic]\n" \
	USAGE_IFCONFIG_MII("\t[mem_start <NN>]  [io_addr <NN>]  [irq <NN>]\n") \
	"\t[up|down] ..."

#define ifup_trivial_usage \
	"<-ahinv> <ifaces...>"
#define ifup_full_usage \
	"Usage: ifup <options> <ifaces...>\n\n" \
	"Options:\n" \
	"\t-h\tthis help\n" \
	"\t-a\tde/configure all interfaces automatically\n" \
	"\t-i FILE\tuse FILE for interface definitions\n" \
	"\t-n\tprint out what would happen, but don't do it\n" \
	"\t\t\t(note that this option doesn't disable mappings)\n" \
	"\t-v\tprint out what would happen before doing it\n" \
	"\t-m\tdon't run any mappings\n" \
	"\t-f\tforce de/configuration\n"

#define ifdown_trivial_usage \
	"<-ahinv> <ifaces...>"
#define ifdown_full_usage \
	"Usage: ifdown <options> <ifaces...>\n\n" \
	"Options:\n" \
	"\t-h\tthis help\n" \
	"\t-a\tde/configure all interfaces automatically\n" \
	"\t-i FILE\tuse FILE for interface definitions\n" \
	"\t-n\tprint out what would happen, but don't do it\n" \
	"\t\t(note that this option doesn't disable mappings)\n" \
	"\t-v\tprint out what would happen before doing it\n" \
	"\t-m\tdon't run any mappings\n" \
	"\t-f\tforce de/configuration\n"
	
#define inetd_trivial_usage \
	"[-q len] [conf]"
#define inetd_full_usage \
	"Usage: [-q len] [conf]\n\n" \
	"Option:\n" \
	"\t-q\tSets the size of the socket listen queue to\n" \
	"the specified value. Default is 128."

#define init_trivial_usage \
	""
#define init_full_usage \
	"Init is the parent of all processes."
#define init_notes_usage \
"This version of init is designed to be run only by the kernel.\n" \
"\n" \
"BusyBox init doesn't support multiple runlevels.  The runlevels field of\n" \
"the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \
"runlevels, use sysvinit.\n" \
"\n" \
"BusyBox init works just fine without an inittab.  If no inittab is found, \n" \
"it has the following default behavior:\n" \
"\n" \
"	::sysinit:/etc/init.d/rcS\n" \
"	::askfirst:/bin/sh\n" \
"	::ctrlaltdel:/sbin/reboot\n" \
"	::shutdown:/sbin/swapoff -a\n" \
"	::shutdown:/bin/umount -a -r\n" \
"	::restart:/sbin/init\n" \
"\n" \
"if it detects that /dev/console is _not_ a serial console, it will also run:\n" \
"\n" \
"	tty2::askfirst:/bin/sh\n" \
"	tty3::askfirst:/bin/sh\n" \
"	tty4::askfirst:/bin/sh\n" \
"\n" \
"If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \
"\n" \
"	<id>:<runlevels>:<action>:<process>\n" \
"\n" \
"	<id>: \n" \
"\n" \
"		WARNING: This field has a non-traditional meaning for BusyBox init!\n" \
"		The id field is used by BusyBox init to specify the controlling tty for\n" \
"		the specified process to run on.  The contents of this field are\n" \
"		appended to "/dev/" and used as-is.  There is no need for this field to\n" \
"		be unique, although if it isn't you may have strange results.  If this\n" \
"		field is left blank, the controlling tty is set to the console.  Also\n" \
"		note that if BusyBox detects that a serial console is in use, then only\n" \
"		entries whose controlling tty is either the serial console or /dev/null\n" \
"		will be run.  BusyBox init does nothing with utmp.  We don't need no\n" \
"		stinkin' utmp.\n" \
"\n" \
"	<runlevels>: \n" \
"\n" \
"		The runlevels field is completely ignored.\n" \
"\n" \
"	<action>: \n" \
"\n" \
"		Valid actions include: sysinit, respawn, askfirst, wait, \n" \
"		once, restart, ctrlaltdel, and shutdown.\n" \
"\n" \
"		The available actions can be classified into two groups: actions\n" \
"		that are run only once, and actions that are re-run when the specified\n" \
"		process exits.\n" \
"\n" \
"		Run only-once actions:\n" \
"\n" \
"			'sysinit' is the first item run on boot.  init waits until all\n" \
"			sysinit actions are completed before continuing.  Following the\n" \
"			completion of all sysinit actions, all 'wait' actions are run.\n" \
"			'wait' actions, like  'sysinit' actions, cause init to wait until\n" \
"			the specified task completes.  'once' actions are asynchronous,\n" \
"			therefore, init does not wait for them to complete.  'restart' is\n" \
"			the action taken to restart the init process.  By default this should\n" \
"			simply run /sbin/init, but can be a script which runs pivot_root or it\n" \
"			can do all sorts of other interesting things.  The 'ctrlaltdel' init\n" \
"			actions are run when the system detects that someone on the system\n" \
"                       console has pressed the CTRL-ALT-DEL key combination.  Typically one\n" \
"                       wants to run 'reboot' at this point to cause the system to reboot.\n" \
"			Finally the 'shutdown' action specifies the actions to taken when\n" \
"                       init is told to reboot.  Unmounting filesystems and disabling swap\n" \
"                       is a very good here\n" \
"\n" \
"		Run repeatedly actions:\n" \
"\n" \
"			'respawn' actions are run after the 'once' actions.  When a process\n" \
"			started with a 'respawn' action exits, init automatically restarts\n" \
"			it.  Unlike sysvinit, BusyBox init does not stop processes from\n" \
"			respawning out of control.  The 'askfirst' actions acts just like\n" \
"			respawn, except that before running the specified process it\n" \
"			displays the line "Please press Enter to activate this console."\n" \
"			and then waits for the user to press enter before starting the\n" \
"			specified process.  \n" \
"\n" \
"		Unrecognized actions (like initdefault) will cause init to emit an\n" \
"		error message, and then go along with its business.  All actions are\n" \
"		run in the order they appear in /etc/inittab.\n" \
"\n" \
"	<process>: \n" \
"\n" \
"		Specifies the process to be executed and it's command line.\n" \
"\n" \
"Example /etc/inittab file:\n" \
"\n" \
"	# This is run first except when booting in single-user mode.\n" \
"	#\n" \
"	::sysinit:/etc/init.d/rcS\n" \
"	\n" \
"	# /bin/sh invocations on selected ttys\n" \
"	#\n" \
"	# Start an "askfirst" shell on the console (whatever that may be)\n" \
"	::askfirst:-/bin/sh\n" \
"	# Start an "askfirst" shell on /dev/tty2-4\n" \
"	tty2::askfirst:-/bin/sh\n" \
"	tty3::askfirst:-/bin/sh\n" \
"	tty4::askfirst:-/bin/sh\n" \
"	\n" \
"	# /sbin/getty invocations for selected ttys\n" \
"	#\n" \
"	tty4::respawn:/sbin/getty 38400 tty4\n" \
"	tty5::respawn:/sbin/getty 38400 tty5\n" \
"	\n" \
"	\n" \
"	# Example of how to put a getty on a serial line (for a terminal)\n" \
"	#\n" \
"	#::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \
"	#::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \
"	#\n" \
"	# Example how to put a getty on a modem line.\n" \
"	#::respawn:/sbin/getty 57600 ttyS2\n" \
"	\n" \
"	# Stuff to do when restarting the init process\n" \
"	::restart:/sbin/init\n" \
"	\n" \
"	# Stuff to do before rebooting\n" \
"	::ctrlaltdel:/sbin/reboot\n" \
"	::shutdown:/bin/umount -a -r\n" \
"	::shutdown:/sbin/swapoff -a\n"

#ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP
  #define USAGE_INSMOD_MAP(a) a
#else
  #define USAGE_INSMOD_MAP(a)
#endif
#define insmod_trivial_usage \
	"[OPTION]... MODULE [symbol=value]..."
#define insmod_full_usage \
	"Loads the specified kernel modules into the kernel.\n\n" \
	"Options:\n" \
	"\t-f\tForce module to load into the wrong kernel version.\n" \
	"\t-k\tMake module autoclean-able.\n" \
	"\t-v\tverbose output\n"  \
	"\t-L\tLock to prevent simultaneous loads of a module\n" \
	USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout") \
	"\t-x\tdo not export externs\n"

#define ip_trivial_usage \
	"[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
#define ip_full_usage \
	"ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
	"where  OBJECT := { link | addr | route | tunnel }\n" \
	"OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }\n"

#define ipaddr_trivial_usage \
	"{ {add|del} IFADDR dev STRING | {show|flush} [ dev STRING ] [ to PREFIX ] }"
#define ipaddr_full_usage \
	"ipaddr {add|del} IFADDR dev STRING\n" \
	"ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \
	"                    [ to PREFIX ] [ label PATTERN ]\n" \
	"IFADDR := PREFIX | ADDR peer PREFIX\n" \
	"          [ broadcast ADDR ] [ anycast ADDR ]\n" \
	"          [ label STRING ] [ scope SCOPE-ID ]\n" \
	"SCOPE-ID := [ host | link | global | NUMBER ]\n"

#ifndef CONFIG_FEATURE_IPCALC_FANCY
# define ipcalc_trivial_usage \
	"[--broadcast] [--netmask] [--network] ipaddr <netmask>"

# define ipcalc_full_usage \
	"Calculate IP network settings from a IP address\n\n" \
	"Options:\n" \
	"\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
	"\t-n\t--netmask\tDisplay default netmask for IP.\n" \
	"\t-w\t--network\tDisplay calculated network address." 
#else
# define ipcalc_trivial_usage \
	"[OPTION]... ipaddr <netmask>"

# define ipcalc_full_usage \
	"Calculate IP network settings from a IP address\n\n" \
	"Options:\n" \
	"\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \
	"\t-n\t--netmask\tDisplay default netmask for IP.\n" \
	"\t-w\t--network\tDisplay calculated network address.\n" \
	"\t-h\t--hostname\tDisplay first resolved host name.\n" \
	"\t-s\t--silent\tDon't ever display error messages." 
#endif

#define ipcalc_notes_usage \
	"ipcalc provides a simple way to calculate IP information for\n" \
	"a host. The various options specify what information ipcalc\n" \
	"should display on standard out. Multiple options may be\n" \
	"specified.\n"

#define iplink_trivial_usage \
	"{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
#define iplink_full_usage \
	"iplink set DEVICE { up | down | arp { on | off } |\n" \
	"                     dynamic { on | off } |\n" \
	"                     mtu MTU }\n" \
	"iplink show [ DEVICE ]\n"

#define iproute_trivial_usage \
	"{ list | flush | { add | del | change | append | replace | monitor } ROUTE }"
#define iproute_full_usage \
	"iproute { list | flush } SELECTOR\n" \
	"iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \
	"                     [ oif STRING ]  [ tos TOS ]\n" \
	"iproute { add | del | change | append | replace | monitor } ROUTE\n" \
	"SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
	"ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]\n"

#define iptunnel_trivial_usage \
	"{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
#define iptunnel_full_usage \
	"iptunnel { add | change | del | show } [ NAME ]\n" \
	"          [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
	"          [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
	"          [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n"

#define kill_trivial_usage \
	"[-signal] process-id [process-id ...]"
#define kill_full_usage \
	"Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
	"Options:\n" \
	"\t-l\tList all signal names and numbers."
#define kill_example_usage \
	"$ ps | grep apache\n" \
	"252 root     root     S [apache]\n" \
	"263 www-data www-data S [apache]\n" \
	"264 www-data www-data S [apache]\n" \
	"265 www-data www-data S [apache]\n" \
	"266 www-data www-data S [apache]\n" \
	"267 www-data www-data S [apache]\n" \
	"$ kill 252\n"

#define killall_trivial_usage \
	"[-signal] process-name [process-name ...]"
#define killall_full_usage \
	"Send a signal (default is SIGTERM) to the specified process(es).\n\n"\
	"Options:\n" \
	"\t-l\tList all signal names and numbers."
#define killall_example_usage \
	"$ killall apache\n" 

#define klogd_trivial_usage \
	"[-c n] [-n]"
#define klogd_full_usage \
	"Kernel logger.\n"\
	"Options:\n"\
	"\t-c n\tSets the default log level of console messages to n.\n"\
	"\t-n\tRun as a foreground process."

#define length_trivial_usage \
	"STRING"
#define length_full_usage \
	"Prints out the length of the specified STRING."
#define length_example_usage \
	"$ length Hello\n" \
	"5\n"

#define ln_trivial_usage \
	"[OPTION] TARGET... LINK_NAME|DIRECTORY"
#define ln_full_usage \
	"Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\
	"\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
	"Options:\n" \
	"\t-s\tmake symbolic links instead of hard links\n" \
	"\t-f\tremove existing destination files\n" \
	"\t-n\tno dereference symlinks - treat like normal file"
#define ln_example_usage \
	"$ ln -s BusyBox /tmp/ls\n" \
	"$ ls -l /tmp/ls\n" \
	"lrwxrwxrwx    1 root     root            7 Apr 12 18:39 ls -> BusyBox*\n" 

#define loadacm_trivial_usage \
	"< mapfile"
#define loadacm_full_usage \
	"Loads an acm from standard input."
#define loadacm_example_usage \
	"$ loadacm < /etc/i18n/acmname\n" 

#define loadfont_trivial_usage \
	"< font"
#define loadfont_full_usage \
	"Loads a console font from standard input."
#define loadfont_example_usage \
	"$ loadfont < /etc/i18n/fontname\n" 

#define loadkmap_trivial_usage \
	"< keymap"
#define loadkmap_full_usage \
	"Loads a binary keyboard translation table from standard input."
#define loadkmap_example_usage \
	"$ loadkmap < /etc/i18n/lang-keymap\n" 

#define logger_trivial_usage \
	"[OPTION]... [MESSAGE]"
#define logger_full_usage \
	"Write MESSAGE to the system log.  If MESSAGE is omitted, log stdin.\n\n" \
	"Options:\n" \
	"\t-s\tLog to stderr as well as the system log.\n" \
	"\t-t\tLog using the specified tag (defaults to user name).\n" \
	"\t-p\tEnter the message with the specified priority.\n" \
	"\t\tThis may be numerical or a ``facility.level'' pair."
#define logger_example_usage \
	"$ logger "hello"\n" 

#define login_trivial_usage \
	"[OPTION]... [username] [ENV=VAR ...]"
#define login_full_usage \
	"Begin a new session on the system\n\n" \
	"Options:\n" \
	"\t-f\tDo not authenticate (user already authenticated)\n" \
	"\t-h\tName of the remote host for this login.\n" \
	"\t-p\tPreserve environment."

#define logname_trivial_usage \
	""
#define logname_full_usage \
	"Print the name of the current user."
#define logname_example_usage \
	"$ logname\n" \
	"root\n" 

#define logread_trivial_usage \
        ""

#define logread_full_usage \
        "Shows the messages from syslogd (using circular buffer)."

#define losetup_trivial_usage \
	"[OPTION]... LOOPDEVICE FILE\n" \
	"or: losetup [OPTION]... -d LOOPDEVICE"
#define losetup_full_usage \
	"Associate LOOPDEVICE with FILE.\n\n" \
	"Options:\n" \
	"\t-d\t\tDisassociate LOOPDEVICE.\n" \
	"\t-o OFFSET\tStart OFFSET bytes into FILE.\n"

#ifdef CONFIG_FEATURE_LS_TIMESTAMPS
  #define USAGE_LS_TIMESTAMPS(a) a
#else
  #define USAGE_LS_TIMESTAMPS(a)
#endif
#ifdef CONFIG_FEATURE_LS_FILETYPES
  #define USAGE_LS_FILETYPES(a) a
#else
  #define USAGE_LS_FILETYPES(a)
#endif
#ifdef CONFIG_FEATURE_LS_FOLLOWLINKS
  #define USAGE_LS_FOLLOWLINKS(a) a
#else
  #define USAGE_LS_FOLLOWLINKS(a)
#endif
#ifdef CONFIG_FEATURE_LS_RECURSIVE
  #define USAGE_LS_RECURSIVE(a) a
#else
  #define USAGE_LS_RECURSIVE(a)
#endif
#ifdef CONFIG_FEATURE_LS_SORTFILES
  #define USAGE_LS_SORTFILES(a) a
#else
  #define USAGE_LS_SORTFILES(a)
#endif
#ifdef CONFIG_FEATURE_AUTOWIDTH
  #define USAGE_AUTOWIDTH(a) a
#else
  #define USAGE_AUTOWIDTH(a)
#endif
#define ls_trivial_usage \
	"[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k] [filenames...]"
#define ls_full_usage \
	"List directory contents\n\n" \
	"Options:\n" \
	"\t-1\tlist files in a single column\n" \
	"\t-A\tdo not list implied . and ..\n" \
	"\t-a\tdo not hide entries starting with .\n" \
	"\t-C\tlist entries by columns\n" \
	USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \
	"\t-d\tlist directory entries instead of contents\n" \
	USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \
	USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \
	"\t-i\tlist the i-node for each file\n" \
	"\t-l\tuse a long listing format\n" \
	"\t-n\tlist numeric UIDs and GIDs instead of names\n" \
	USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \
	USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \
	USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \
	USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \
	USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \
	"\t-s\tlist the size of each file, in blocks\n" \
	USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \
	USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \
	USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \
	USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \
	USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \
	"\t-x\tlist entries by lines instead of by columns\n" \
	USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \
	USAGE_HUMAN_READABLE( \
	"\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \
	"\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \
	"\t-k\tprint sizes in kilobytes(compatibility)") 

#define lsmod_trivial_usage \
	""
#define lsmod_full_usage \
	"List the currently loaded kernel modules."

#define makedevs_trivial_usage \
	"NAME TYPE MAJOR MINOR FIRST LAST [s]"
#define makedevs_full_usage \
	"Creates a range of block or character special files\n\n" \
	"TYPEs include:\n" \
	"\tb:\tMake a block (buffered) device.\n" \
	"\tc or u:\tMake a character (un-buffered) device.\n" \
	"\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \
	"FIRST specifies the number appended to NAME to create the first device.\n" \
	"LAST specifies the number of the last item that should be created.\n" \
	"If 's' is the last argument, the base device is created as well.\n\n" \
	"For example:\n" \
	"\tmakedevs /dev/ttyS c 4 66 2 63   ->  ttyS2-ttyS63\n" \
	"\tmakedevs /dev/hda b 3 0 0 8 s    ->  hda,hda1-hda8"
#define makedevs_example_usage \
	"$ makedevs /dev/ttyS c 4 66 2 63\n" \
	"[creates ttyS2-ttyS63]\n" \
	"$ makedevs /dev/hda b 3 0 0 8 s\n" \
	"[creates hda,hda1-hda8]\n" 

#define md5sum_trivial_usage \
	"[OPTION] [FILE]...\n" \
	"or: md5sum [OPTION] -c [FILE]"
#define md5sum_full_usage \
	"Print or check MD5 checksums.\n\n" \
	"Options:\n" \
	"With no FILE, or when FILE is -, read standard input.\n\n" \
	"\t-b\tread files in binary mode\n" \
	"\t-c\tcheck MD5 sums against given list\n" \
	"\t-t\tread files in text mode (default)\n" \
	"\t-g\tread a string\n" \
	"\nThe following two options are useful only when verifying checksums:\n" \
	"\t-s\tdon't output anything, status code shows success\n" \
	"\t-w\twarn about improperly formated MD5 checksum lines"
#define md5sum_example_usage \
	"$ md5sum < busybox\n" \
	"6fd11e98b98a58f64ff3398d7b324003\n" \
	"$ md5sum busybox\n" \
	"6fd11e98b98a58f64ff3398d7b324003  busybox\n" \
	"$ md5sum -c -\n" \
	"6fd11e98b98a58f64ff3398d7b324003  busybox\n" \
	"busybox: OK\n" \
	"^D\n"

#define mesg_trivial_usage \
	"mesg [y|n]"
#define mesg_full_usage \
	"mesg [Y|N], controls write access to your terminal\n" \
	"\ty\tAllow write access to your terminal.\n" \
	"\tn\tDisallow write access to your terminal.\n"

#define minit_trivial_usage \
	"[-spPrRC]"
#define minit_full_usage \
	"[-spPrRC]"

#define mkdir_trivial_usage \
	"[OPTION] DIRECTORY..."
#define mkdir_full_usage \
	"Create the DIRECTORY(ies) if they do not already exist\n\n" \
	"Options:\n" \
	"\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \
	"\t-p\tno error if existing, make parent directories as needed"
#define mkdir_example_usage \
	"$ mkdir /tmp/foo\n" \
	"$ mkdir /tmp/foo\n" \
	"/tmp/foo: File exists\n" \
	"$ mkdir /tmp/foo/bar/baz\n" \
	"/tmp/foo/bar/baz: No such file or directory\n" \
	"$ mkdir -p /tmp/foo/bar/baz\n" 

#define mkfifo_trivial_usage \
	"[OPTIONS] name"
#define mkfifo_full_usage \
	"Creates a named pipe (identical to 'mknod name p')\n\n" \
	"Options:\n" \
	"\t-m\tcreate the pipe using the specified mode (default a=rw)"

#define mkfs_minix_trivial_usage \
	"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#define mkfs_minix_full_usage \
	"Make a MINIX filesystem.\n\n" \
	"Options:\n" \
	"\t-c\t\tCheck the device for bad blocks\n" \
	"\t-n [14|30]\tSpecify the maximum length of filenames\n" \
	"\t-i INODES\tSpecify the number of inodes for the filesystem\n" \
	"\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \
	"\t-v\t\tMake a Minix version 2 filesystem"

#define mknod_trivial_usage \
	"[OPTIONS] NAME TYPE MAJOR MINOR"
#define mknod_full_usage \
	"Create a special file (block, character, or pipe).\n\n" \
	"Options:\n" \
	"\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \
	"TYPEs include:\n" \
	"\tb:\tMake a block (buffered) device.\n" \
	"\tc or u:\tMake a character (un-buffered) device.\n" \
	"\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes."
#define mknod_example_usage \
	"$ mknod /dev/fd0 b 2 0 \n" \
	"$ mknod -m 644 /tmp/pipe p\n" 

#define mkswap_trivial_usage \
	"[-c] [-v0|-v1] device [block-count]"
#define mkswap_full_usage \
	"Prepare a disk partition to be used as a swap partition.\n\n" \
	"Options:\n" \
	"\t-c\t\tCheck for read-ability.\n" \
	"\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \
	"\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \
	"\tblock-count\tNumber of block to use (default is entire partition)."

#define mktemp_trivial_usage \
	"[-q] TEMPLATE"
#define mktemp_full_usage \
	"Creates a temporary file with its name based on TEMPLATE.\n" \
	"TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX)."
#define mktemp_example_usage \
	"$ mktemp /tmp/temp.XXXXXX\n" \
	"/tmp/temp.mWiLjM\n" \
	"$ ls -la /tmp/temp.mWiLjM\n" \
	"-rw-------    1 andersen andersen        0 Apr 25 17:10 /tmp/temp.mWiLjM\n" 

#define modprobe_trivial_usage \
	"[FILE ...]"
#define modprobe_full_usage \
	"Used for high level module loading and unloading."
#define modprobe_example_usage \
	"$ modprobe cdrom\n" 

#define more_trivial_usage \
	"[FILE ...]"
#define more_full_usage \
	"More is a filter for viewing FILE one screenful at a time."
#define more_example_usage \
	"$ dmesg | more\n" 

#ifdef CONFIG_FEATURE_MOUNT_LOOP
  #define USAGE_MOUNT_LOOP(a) a
#else
  #define USAGE_MOUNT_LOOP(a)
#endif
#ifdef CONFIG_FEATURE_MTAB_SUPPORT
  #define USAGE_MTAB(a) a
#else
  #define USAGE_MTAB(a)
#endif
#define mount_trivial_usage \
	"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
	"Mount a filesystem\n\n" \
	"Flags:\n"  \
	"\t-a:\t\tMount all filesystems in fstab.\n" \
	USAGE_MTAB( \
	"\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \
	"\t-n:\t\tDon't write a mount table entry.\n" \
	) \
	"\t-o option:\tOne of many filesystem options, listed below.\n" \
	"\t-r:\t\tMount the filesystem read-only.\n" \
	"\t-t fs-type:\tSpecify the filesystem type.\n" \
	"\t-w:\t\tMount for reading and writing (default).\n" \
	"\n" \
	"Options for use with the \"-o\" flag:\n" \
	"\tasync/sync:\tWrites are asynchronous / synchronous.\n" \
	"\tatime/noatime:\tEnable / disable updates to inode access times.\n" \
	"\tdev/nodev:\tAllow use of special device files / disallow them.\n" \
	"\texec/noexec:\tAllow use of executable files / disallow them.\n" \
	USAGE_MOUNT_LOOP( \
	"\tloop:\t\tMounts a file via loop device.\n" \
	) \
	"\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \
	"\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \
	"\tro/rw:\t\tMount for read-only / read-write.\n" \
	"\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \
	"\nThere are EVEN MORE flags that are specific to each filesystem.\n" \
	"You'll have to see the written documentation for those filesystems."
#define mount_example_usage \
	"$ mount\n" \
	"/dev/hda3 on / type minix (rw)\n" \
	"proc on /proc type proc (rw)\n" \
	"devpts on /dev/pts type devpts (rw)\n" \
	"$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
	"$ mount /tmp/diskimage /opt -t ext2 -o loop\n" 

#define msvc_trivial_usage \
	"-[udorspchaitkx] service"
#define msvc_full_usafe \
	"[option] service\n" \
	"Where option is one of\n" \
	"\t-u\tUp.  If the service is not running, start it.  If the service stops, restart it.\n" \
	"\t-d\tDown.  If the service is running, stop it, do not restart it.\n" \
	"\t-o\tOnce.  If the service is not running, start it.  Do not restart it if it stops.\n" \
	"\t-r\tTell supervise that the service is normally running; this affects status messages.\n" \
	"\t-s\tTell supervise that the service is normally stopped; this affects status messages.\n" \
	"\t-p\tPause.  Send the service a STOP signal.\n" \
	"\t-c\tContinue.  Send the service a CONT signal.\n" \
	"\t-h\tHangup.  Send the service a HUP signal.\n" \
	"\t-a\tAlarm.  Send the service an ALRM signal.\n" \
	"\t-i\tInterrupt.  Send the service an INT signal.\n" \
	"\t-t\tTerminate.  Send the service a TERM signal.\n" \
	"\t-k\tKill.  Send the service a KILL signal.\n" \
	"\t-x\tExit.  supervise will quit as soon as the service is down.\n"

#define mt_trivial_usage \
	"[-f device] opcode value"
#define mt_full_usage \
	"Control magnetic tape drive operation\n" \
	"\nAvailable Opcodes:\n\n" \
	"bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
	"fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
	"ras3 reset retension rew rewoffline seek setblk setdensity\n" \
	"setpart tell unload unlock weof wset"

#define mv_trivial_usage \
	"SOURCE DEST\n" \
	"or: mv SOURCE... DIRECTORY"
#define mv_full_usage \
	"Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY."
#define mv_example_usage \
	"$ mv /tmp/foo /bin/bar\n" 

#define nameif_trivial_usage \
	"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage \
		"Nameif renaming network interface while it in the down state.\n\n" \
		"Options:\n" \
		"\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
		"\t-s\t\tUse syslog (LOCAL0 facility).\n" \
		"\tIFNAME MACADDR\tnew_interface_name interface_mac_address\n" 
#define nameif_example_usage \
		"$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
		" or\n" \
		"$ nameif -c /etc/my_mactab_file\n" \

#define nc_trivial_usage \
	"[OPTIONS] [IP] [port]" 
#define nc_full_usage \
	"Netcat opens a pipe to IP:port\n\n" \
	"Options:\n" \
	"\t-l\t\tlisten mode, for inbound connects\n" \
	"\t-p PORT\t\tlocal port number\n" \
	"\t-i SECS\t\tdelay interval for lines sent\n" \
	"\t-e PROG\t\tprogram to exec after connect (dangerous!)"
#define nc_example_usage \
	"$ nc foobar.somedomain.com 25\n" \
	"220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \
	"help\n" \
	"214-Commands supported:\n" \
	"214-    HELO EHLO MAIL RCPT DATA AUTH\n" \
	"214     NOOP QUIT RSET HELP\n" \
	"quit\n" \
	"221 foobar closing connection\n" 

#define netstat_trivial_usage \
	"[-laenrtuwx]"
#define netstat_full_usage \
	"-l display listening server sockets\n" \
	"-a display all sockets (default: connected)\n" \
	"-e display other/more information\n" \
	"-n don't resolve names\n" \
	"-r display routing table\n" \
	"-t tcp sockets\n" \
	"-u udp sockets\n" \
	"-w raw sockets\n" \
	"-x unix sockets\n"

#define nslookup_trivial_usage \
	"[HOST] [SERVER]"
#define nslookup_full_usage \
	"Queries the nameserver for the IP address of the given HOST\n" \
	"optionally using a specified DNS server"
#define nslookup_example_usage \
	"$ nslookup localhost\n" \
	"Server:     default\n" \
	"Address:    default\n" \
	"\n" \
	"Name:       debian\n" \
	"Address:    127.0.0.1\n" 

#define od_trivial_usage \
	"[-aBbcDdeFfHhIiLlOovXx] [FILE]"
#define od_full_usage \
	"Write an unambiguous representation, octal bytes by default, of FILE\n"\
	"to standard output.  With no FILE, or when FILE is -, read standard input."

#define openvt_trivial_usage \
	"<vtnum> <COMMAND> [ARGS...]"
#define openvt_full_usage \
	"Start a command on a new virtual terminal"
#define openvt_example_usage \
	"openvt 2 /bin/ash\n"

#ifdef CONFIG_FEATURE_SHA1_PASSWORDS
  #define PASSWORD_ALG_TYPES(a) a
#else   
  #define PASSWORD_ALG_TYPES(a)
#endif
#define passwd_trivial_usage \
	"[OPTION] [name]"
#define passwd_full_usage \
	"Change a user password. If no name is specified,\n" \
	"changes the password for the current user.\n" \
	"Options:\n" \
	"\t-a\tDefine which algorithm shall be used for the password.\n" \
	"\t\t\t(Choices: des, md5" \
	PASSWORD_ALG_TYPES(", sha1") \
	")\n\t-d\tDelete the password for the specified user account.\n" \
	"\t-l\tLocks (disables) the specified user account.\n" \
	"\t-u\tUnlocks (re-enables) the specified user account."

#define patch_trivial_usage \
	"[-p<num>]"
#define patch_full_usage \
	"[-p<num>]"
#define patch_example_usage \
	"$ patch -p1 <example.diff"

#define pidfilehack_trivial_usage \
	"[daemon.pid] [daemon]"
#define pidfilehack_full_usage \
	"service /var/run/daemon.pid /usr/sbin/daemon args...\n"

#define pidof_trivial_usage \
	"process-name [process-name ...]"
#define pidof_full_usage \
	"Lists the PIDs of all processes with names that match the names on the command line"
#define pidof_example_usage \
	"$ pidof init\n" \
	"1\n"

#ifndef CONFIG_FEATURE_FANCY_PING
#define ping_trivial_usage "host"
#define ping_full_usage    "Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping_trivial_usage \
	"[OPTION]... host"
#define ping_full_usage \
	"Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
	"Options:\n" \
	"\t-c COUNT\tSend only COUNT pings.\n" \
	"\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
	"\t-q\t\tQuiet mode, only displays output at start\n" \
	"\t\t\tand when finished."
#endif
#define ping_example_usage \
	"$ ping localhost\n" \
	"PING slag (127.0.0.1): 56 data bytes\n" \
	"64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \
	"\n" \
	"--- debian ping statistics ---\n" \
	"1 packets transmitted, 1 packets received, 0% packet loss\n" \
	"round-trip min/avg/max = 20.1/20.1/20.1 ms\n" 

#ifndef CONFIG_FEATURE_FANCY_PING6
#define ping6_trivial_usage "host"
#define ping6_full_usage    "Send ICMP ECHO_REQUEST packets to network hosts"
#else
#define ping6_trivial_usage \
	"[OPTION]... host"
#define ping6_full_usage \
	"Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
	"Options:\n" \
	"\t-c COUNT\tSend only COUNT pings.\n" \
	"\t-s SIZE\t\tSend SIZE data bytes in packets (default=56).\n" \
	"\t-q\t\tQuiet mode, only displays output at start\n" \
	"\t\t\tand when finished."
#endif
#define ping6_example_usage \
	"$ ping6 ip6-localhost\n" \
	"PING ip6-localhost (::1): 56 data bytes\n" \
	"64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \
	"\n" \
	"--- ip6-localhost ping statistics ---\n" \
	"1 packets transmitted, 1 packets received, 0% packet loss\n" \
	"round-trip min/avg/max = 20.1/20.1/20.1 ms\n" 

#define pivot_root_trivial_usage \
	"NEW_ROOT PUT_OLD"
#define pivot_root_full_usage \
	"Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
	"the new root file system."

#define poweroff_trivial_usage \
	""
#define poweroff_full_usage \
	"Halt the system and request that the kernel shut off the power."

#define printf_trivial_usage \
	"FORMAT [ARGUMENT...]"
#define printf_full_usage \
	"Formats and prints ARGUMENT(s) according to FORMAT,\n" \
	"Where FORMAT controls the output exactly as in C printf."
#define printf_example_usage \
	"$ printf "Val=%d\\n" 5\n" \
	"Val=5\n" 

#define ps_trivial_usage \
	""
#define ps_full_usage \
	"Report process status\n" \
	"\nThis version of ps accepts no options."
#define ps_example_usage \
	"$ ps\n" \
	"  PID  Uid      Gid State Command\n" \
	"    1 root     root     S init\n" \
	"    2 root     root     S [kflushd]\n" \
	"    3 root     root     S [kupdate]\n" \
	"    4 root     root     S [kpiod]\n" \
	"    5 root     root     S [kswapd]\n" \
	"  742 andersen andersen S [bash]\n" \
	"  743 andersen andersen S -bash\n" \
	"  745 root     root     S [getty]\n" \
	" 2990 andersen andersen R ps\n"

#define pwd_trivial_usage \
	""
#define pwd_full_usage \
	"Print the full filename of the current working directory."
#define pwd_example_usage \
	"$ pwd\n" \
	"/root\n"

#define rdate_trivial_usage \
	"[OPTION] HOST"
#define rdate_full_usage \
	"Get and possibly set the system date and time from a remote HOST.\n\n" \
	"Options:\n" \
	"\t-s\tSet the system date and time (default).\n" \
	"\t-p\tPrint the date and time."

#define readlink_trivial_usage \
	""
#define readlink_full_usage \
	"Read a symbolic link."

#define realpath_trivial_usage \
	"pathname  ..."
#define realpath_full_usage \
	"return the canonicalized absolute pathnames of given arguments\n\n"
	
#define reboot_trivial_usage \
	""
#define reboot_full_usage \
	"Reboot the system."

#define renice_trivial_usage \
	"priority pid [pid ...]"
#define renice_full_usage \
	"Changes priority of running processes. Allowed priorities range\n" \
	"from 20 (the process runs only when nothing else is running) to 0\n" \
	"(default priority) to -20 (almost nothing else ever gets to run)."

#define reset_trivial_usage \
	""
#define reset_full_usage \
	"Resets the screen."

#define rm_trivial_usage \
	"[OPTION]... FILE..."
#define rm_full_usage \
	"Remove (unlink) the FILE(s).  You may use '--' to\n" \
	"indicate that all following arguments are non-options.\n\n" \
	"Options:\n" \
	"\t-i\t\talways prompt before removing each destination\n" \
	"\t-f\t\tremove existing destinations, never prompt\n" \
	"\t-r or -R\tremove the contents of directories recursively"
#define rm_example_usage \
	"$ rm -rf /tmp/foo\n"

#define rmdir_trivial_usage \
	"[OPTION]... DIRECTORY..."
#define rmdir_full_usage \
	"Remove the DIRECTORY(ies), if they are empty."
#define rmdir_example_usage \
	"# rmdir /tmp/foo\n"

#define rmmod_trivial_usage \
	"[OPTION]... [MODULE]..."
#define rmmod_full_usage \
	"Unloads the specified kernel modules from the kernel.\n\n" \
	"Options:\n" \
	"\t-a\tRemove all unused modules (recursively)"
#define rmmod_example_usage \
	"$ rmmod tulip\n"

#define route_trivial_usage \
	"[{add|del|flush}]"
#define route_full_usage \
	"Edit the kernel's routing tables.\n\n" \
	"Options:\n" \
	"\t-n\tDont resolve names.\n" \
	"\t-e\tDisplay other/more information"

#define rpm_trivial_usage \
	"-i -q[ildc]p package.rpm"
#define rpm_full_usage \
	"Manipulates RPM packages" \
	"\n\nOptions:" \
	"\n\t-i Install package" \
	"\n\t-q Query package" \
	"\n\t-p Query uninstalled package" \
	"\n\t-i Show information" \
	"\n\t-l List contents" \
	"\n\t-d List documents" \
	"\n\t-c List config files"

#define rpm2cpio_trivial_usage \
	"package.rpm"
#define rpm2cpio_full_usage \
	"Outputs a cpio archive of the rpm file."

#define run_parts_trivial_usage \
	"[-t] [-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage \
	"Run a bunch of scripts in a directory.\n\n" \
	"Options:\n" \
	"\t-t\t\tTest only what file will be executed, without execute them.\n"	\
	"\t-a ARG\tPass ARG as an argument for every program invoked.\n" \
	"\t-u MASK\tSet the umask to MASK before executing every program."

#define sed_trivial_usage \
	"[-nef] pattern [files...]"
#define sed_full_usage \
	"Options:\n" \
	"\t-n\t\tsuppress automatic printing of pattern space\n" \
	"\t-e script\tadd the script to the commands to be executed\n" \
	"\t-f scriptfile\tadd the contents of script-file to the commands to be executed\n" \
	"\n" \
	"If no -e or -f is given, the first non-option argument is taken as the\n" \
	"sed script to interpret. All remaining arguments are names of input\n" \
	"files; if no input files are specified, then the standard input is read."
#define sed_example_usage \
	"$ echo "foo" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
	"bar\n"

#define setkeycodes_trivial_usage \
	"SCANCODE KEYCODE ..."
#define setkeycodes_full_usage \
	"Set entries into the kernel's scancode-to-keycode map,\n" \
	"allowing unusual keyboards to generate usable keycodes.\n\n" \
	"SCANCODE may be either xx or e0xx (hexadecimal),\n" \
	"and KEYCODE is given in decimal"
#define setkeycodes_example_usage \
	"$ setkeycodes e030 127\n"

#define lash_trivial_usage \
	"[FILE]...\n" \
	"or: sh -c command [args]..."
#define lash_full_usage \
	"lash: The BusyBox LAme SHell (command interpreter)"
#define lash_notes_usage \
"This command does not yet have proper documentation.\n" \
"\n" \
"Use lash just as you would use any other shell.  It properly handles pipes,\n" \
"redirects, job control, can be used as the shell for scripts, and has a\n" \
"sufficient set of builtins to do what is needed.  It does not (yet) support\n" \
"Bourne Shell syntax.  If you need things like "if-then-else", "while", and such\n" \
"use ash or bash.  If you just need a very simple and extremely small shell,\n" \
"this will do the job."

#define sha1sum_trivial_usage \
	"[OPTION] [FILE]"
#define sha1sum_full_usage \
	"[OPTION] [FILE]"

#ifdef CONFIG_FEATURE_FANCY_SLEEP
  #define USAGE_FANCY_SLEEP(a) a
  #define USAGE_NOT_FANCY_SLEEP(a)
#else
  #define USAGE_FANCY_SLEEP(a) 
  #define USAGE_NOT_FANCY_SLEEP(a) a
#endif

#define sleep_trivial_usage \
	USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...") 
#define sleep_full_usage \
	USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
	USAGE_FANCY_SLEEP( \
"Pause for a time equal to the total of the args given, where each arg can\n" \
"have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
#define sleep_example_usage \
	"$ sleep 2\n" \
	"[2 second delay results]\n" \
	USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \
	"[98528 second delay results]\n")

#ifdef CONFIG_FEATURE_SORT_UNIQUE
  #define USAGE_SORT_UNIQUE(a) a
#else
  #define USAGE_SORT_UNIQUE(a)
#endif
#ifdef CONFIG_FEATURE_SORT_REVERSE
  #define USAGE_SORT_REVERSE(a) a
#else
  #define USAGE_SORT_REVERSE(a)
#endif
#define sort_trivial_usage \
	"[-n" USAGE_SORT_REVERSE("r") USAGE_SORT_UNIQUE("u") "] [FILE]..."
#define sort_full_usage \
	"Sorts lines of text in the specified files\n\n"\
	"Options:\n" \
	USAGE_SORT_UNIQUE("\t-u\tsuppress duplicate lines\n") \
	USAGE_SORT_REVERSE("\t-r\tsort in reverse order\n") \
	"\t-n\tsort numerics"
#define sort_example_usage \
	"$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \
	"a\n" \
	"b\n" \
	"c\n" \
	"d\n" \
	"e\n" \
	"f\n"

#define start_stop_daemon_trivial_usage \
	"[OPTIONS]"
#define start_stop_daemon_full_usage \
	"Program to start and stop services.\n"\
	"Options:\n" \
	"-S\t\t\tstart\n"\
	"-K\t\t\tstop\n"\
	"-b\t\t\tforce process into background (daemonize)\n"\
	"-x <executable>\t\tprogram to start/check if it is running\n"\
	"-u <username>|<uid>\tstop this user's processes\n"\
	"-n <process-name>\tstop processes with this name\n"\
	"-s <signal>\t\tsignal to send (default 15)\n"\
	"-a <pathname>\t\tprogram to start (default <executable>)\n"

#define strings_trivial_usage \
    "[-afo] [-n length] [file ... ]"
#define strings_full_usage \
    "Display printable strings in a binary file." \
    "\n\nOptions:" \
    "\n\t-f\tPrecede each string with the name of the file where it was found." \
    "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
    "\n\t-o\tEach string is preceded by its decimal offset in the file."

#define stty_trivial_usage \
	"[-a|g] [-F DEVICE] [SETTING]..."
#define stty_full_usage \
	"Without arguments, prints baud rate, line discipline," \
	"\nand deviations from stty sane." \
	"\n\nOptions:" \
	"\n\t-F DEVICE\topen device instead of stdin" \
	"\n\t-a\t\tprint all current settings in human-readable form" \
	"\n\t-g\t\tprint in stty-readable form" \
	"\n\t[SETTING]\tsee manpage"

#define su_trivial_usage \
	"[OPTION]... [-] [username]"
#define su_full_usage \
	"Change user id or become root.\n" \
	"Options:\n" \
	"\t-p\tPreserve environment"

#define sulogin_trivial_usage \
	"[OPTION]... [tty-device]"
#define sulogin_full_usage \
	"Single user login\n" \
	"Options:\n" \
	"\t-f\tDo not authenticate (user already authenticated)\n" \
	"\t-h\tName of the remote host for this login.\n" \
	"\t-p\tPreserve environment."

#define swapoff_trivial_usage \
	"[OPTION] [DEVICE]"
#define swapoff_full_usage \
	"Stop swapping virtual memory pages on DEVICE.\n\n" \
	"Options:\n" \
	"\t-a\tStop swapping on all swap devices"

#define swapon_trivial_usage \
	"[OPTION] [DEVICE]"
#define swapon_full_usage \
	"Start swapping virtual memory pages on DEVICE.\n\n" \
	"Options:\n" \
	"\t-a\tStart swapping on all swap devices"

#define sync_trivial_usage \
	""
#define sync_full_usage \
	"Write all buffered filesystem blocks to disk."


#ifdef CONFIG_FEATURE_REMOTE_LOG
  #define USAGE_REMOTE_LOG(a) a
#else
  #define USAGE_REMOTE_LOG(a)
#endif
#ifdef CONFIG_FEATURE_IPC_SYSLOG
  #define USAGE_IPC_LOG(a) a
#else
  #define USAGE_IPC_LOG(a)
#endif

#define syslogd_trivial_usage \
	"[OPTION]..."
#define syslogd_full_usage \
	"Linux system and kernel logging utility.\n" \
	"Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
	"Options:\n" \
	"\t-m NUM\t\tInterval between MARK lines (default=20min, 0=off)\n" \
	"\t-n\t\tRun as a foreground process\n" \
	"\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \
	USAGE_REMOTE_LOG( \
	"\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
	"\t-L\t\tLog locally and via network logging (default is network only)") \
	USAGE_IPC_LOG( \
	"\n\t-C\t\tLog to a circular buffer (read the buffer using logread)")
#define syslogd_example_usage \
	"$ syslogd -R masterlog:514\n" \
	"$ syslogd -R 192.168.1.1:601\n"


#ifndef CONFIG_FEATURE_FANCY_TAIL
  #define USAGE_UNSIMPLE_TAIL(a)
#else
  #define USAGE_UNSIMPLE_TAIL(a) a
#endif
#define tail_trivial_usage \
	"[OPTION]... [FILE]..."
#define tail_full_usage \
	"Print last 10 lines of each FILE to standard output.\n" \
	"With more than one FILE, precede each with a header giving the\n" \
	"file name. With no FILE, or when FILE is -, read standard input.\n\n" \
	"Options:\n" \
	USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \
	"\t-n N[kbm]\tprint last N lines instead of last 10\n" \
	"\t-f\t\toutput data as the file grows" \
	USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \
	"\t-s SEC\t\twait SEC seconds between reads with -f\n" \
	"\t-v\t\talways output headers giving file names\n\n" \
	"If the first character of N (bytes or lines) is a '+', output begins with \n" \
	"the Nth item from the start of each file, otherwise, print the last N items\n" \
	"in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
#define tail_example_usage \
	"$ tail -n 1 /etc/resolv.conf\n" \
	"nameserver 10.0.0.1\n"

#ifdef CONFIG_FEATURE_TAR_CREATE
  #define USAGE_TAR_CREATE(a) a
#else
  #define USAGE_TAR_CREATE(a)
#endif
#ifdef CONFIG_FEATURE_TAR_EXCLUDE
  #define USAGE_TAR_EXCLUDE(a) a
#else
  #define USAGE_TAR_EXCLUDE(a)
#endif
#ifdef CONFIG_FEATURE_TAR_GZIP
  #define USAGE_TAR_GZIP(a) a
#else
  #define USAGE_TAR_GZIP(a)
#endif
#ifdef CONFIG_FEATURE_TAR_BZIP2
  #define USAGE_TAR_BZIP2(a) a
#else
  #define USAGE_TAR_BZIP2(a)
#endif

#define tar_trivial_usage \
	"-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") "xtvO] " \
	USAGE_TAR_EXCLUDE("[--exclude FILE] [-X FILE]") \
	"[-f TARFILE] [-C DIR] [FILE(s)] ..."
#define tar_full_usage \
	"Create, extract, or list files from a tar file.\n\n" \
	"Options:\n" \
	USAGE_TAR_CREATE("\tc\t\tcreate\n") \
	"\tx\t\textract\n" \
	"\tt\t\tlist\n" \
	"\nArchive format selection:\n" \
	USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \
	USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \
	"\nFile selection:\n" \
	"\tf\t\tname of TARFILE or \"-\" for stdin\n" \
	"\tO\t\textract to stdout\n" \
	USAGE_TAR_EXCLUDE( \
	"\texclude\t\tfile to exclude\n" \
	 "\tX\t\tfile with names to exclude\n" \
	) \
	"\tC\t\tchange to directory DIR before operation\n" \
	"\tv\t\tverbosely list files processed"
#define tar_example_usage \
	"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
	"$ tar -cf /tmp/tarball.tar /usr/local\n"

#define tee_trivial_usage \
	"[OPTION]... [FILE]..."
#define tee_full_usage \
	"Copy standard input to each FILE, and also to standard output.\n\n" \
	"Options:\n" \
	"\t-a\tappend to the given FILEs, do not overwrite\n" \
	"\t-i\tignore interrupt signals (SIGINT)"
#define tee_example_usage \
	"$ echo "Hello" | tee /tmp/foo\n" \
	"$ cat /tmp/foo\n" \
	"Hello\n"

#define telnet_trivial_usage \
	"HOST [PORT]"
#define telnet_full_usage \
	"Telnet is used to establish interactive communication with another\n"\
	"computer over a network using the TELNET protocol."

#ifdef CONFIG_FEATURE_TELNETD_INETD
#define telnetd_trivial_usage \
	"(inetd mode) [OPTION]"
#define telnetd_full_usage \
	"Telnetd uses incoming TELNET connections via inetd.\n"\
	"Options:\n" \
	"\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
#else
#define telnetd_trivial_usage \
	"[OPTION]"
#define telnetd_full_usage \
	"Telnetd listens for incoming TELNET connections on PORT.\n"\
	"Options:\n" \
	"\t-p PORT\tlisten for connections on PORT (default 23)\n"\
	"\t-l LOGIN\texec LOGIN on connect (default /bin/sh)"
#endif

#define test_trivial_usage \
	"EXPRESSION\n  or   [ EXPRESSION ]"
#define test_full_usage \
	"Checks file types and compares values returning an exit\n" \
	"code determined by the value of EXPRESSION."
#define test_example_usage \
	"$ test 1 -eq 2\n" \
	"$ echo $?\n" \
	"1\n" \
	"$ test 1 -eq 1\n" \
	"$ echo $? \n" \
	"0\n" \
	"$ [ -d /etc ]\n" \
	"$ echo $?\n" \
	"0\n" \
	"$ [ -d /junk ]\n" \
	"$ echo $?\n" \
	"1\n"

#ifdef CONFIG_FEATURE_TFTP_GET
  #define USAGE_TFTP_GET(a) a
#else
  #define USAGE_TFTP_GET(a)
#endif
#ifdef CONFIG_FEATURE_TFTP_PUT
  #define USAGE_TFTP_PUT(a) a
#else
  #define USAGE_TFTP_PUT(a)
#endif
#ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE
  #define USAGE_TFTP_BS(a) a
#else
  #define USAGE_TFTP_BS(a)
#endif

#define tftp_trivial_usage \
	"[OPTION]... HOST [PORT]"
#define tftp_full_usage \
	"Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
	"Options:\n" \
	"\t-l FILE\tLocal FILE.\n" \
	"\t-r FILE\tRemote FILE.\n" \
        USAGE_TFTP_GET(	\
        "\t-g\tGet file.\n" \
        ) \
        USAGE_TFTP_PUT(	\
	"\t-p\tPut file.\n" \
	) \
	USAGE_TFTP_BS( \
	"\t-b SIZE\tTransfer blocks of SIZE octets.\n" \
	)	
#define time_trivial_usage \
	"[OPTION]... COMMAND [ARGS...]"
#define time_full_usage \
	"Runs the program COMMAND with arguments ARGS.  When COMMAND finishes,\n" \
	"COMMAND's resource usage information is displayed\n\n" \
	"Options:\n" \
	"\t-v\tDisplays verbose resource usage information."

#define top_trivial_usage \
	"[-d <seconds>]"
#define top_full_usage \
	"top provides an view of processor activity in real time.\n" \
	"This utility reads the status for all processes in /proc each <seconds>\n" \
	"and shows the status for however many processes will fit on the screen.\n" \
	"This utility will not show processes that are started after program startup,\n" \
	"but it will show the EXIT status for and PIDs that exit while it is running."

#define touch_trivial_usage \
	"[-c] FILE [FILE ...]"
#define touch_full_usage \
	"Update the last-modified date on the given FILE[s].\n\n" \
	"Options:\n" \
	"\t-c\tDo not create any files"
#define touch_example_usage \
	"$ ls -l /tmp/foo\n" \
	"/bin/ls: /tmp/foo: No such file or directory\n" \
	"$ touch /tmp/foo\n" \
	"$ ls -l /tmp/foo\n" \
	"-rw-rw-r--    1 andersen andersen        0 Apr 15 01:11 /tmp/foo\n" 

#define tr_trivial_usage \
	"[-cds] STRING1 [STRING2]"
#define tr_full_usage \
	"Translate, squeeze, and/or delete characters from\n" \
	"standard input, writing to standard output.\n\n" \
	"Options:\n" \
	"\t-c\ttake complement of STRING1\n" \
	"\t-d\tdelete input characters coded STRING1\n" \
	"\t-s\tsqueeze multiple output characters of STRING2 into one character"
#define tr_example_usage \
	"$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \
	"hello world\n" 

#define traceroute_trivial_usage \
	"[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n\
	[-s src_addr] [-t tos] [-w wait] host [data size]"
#define traceroute_full_usage \
	"trace the route ip packets follow going to \"host\"\n" \
	"Options:\n" \
	"\t-d\tset SO_DEBUG options to socket\n" \
	"\t-n\tPrint hop addresses numerically rather than symbolically\n" \
	"\t-r\tBypass the normal routing tables and send directly to a host\n" \
	"\t-v\tVerbose output\n" \
	"\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \
	"\t-p port#\tSet the base UDP port number used in probes\n" \
	"\t\t(default is 33434)\n" \
	"\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \
	"\t\t(default is 3)\n" \
	"\t-s src_addr\tUse the following IP address as the source address\n" \
	"\t-t tos\tSet the type-of-service in probe packets to the following value\n" \
	"\t\t(default 0)\n" \
	"\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \
	"\t\t(default 3 sec.)."


#define true_trivial_usage \
	""
#define true_full_usage \
	"Return an exit code of TRUE (0)."
#define true_example_usage \
	"$ true\n" \
	"$ echo $?\n" \
	"0\n"

#define tty_trivial_usage \
	""
#define tty_full_usage \
	"Print the file name of the terminal connected to standard input.\n\n"\
	"Options:\n" \
	"\t-s\tprint nothing, only return an exit status"
#define tty_example_usage \
	"$ tty\n" \
	"/dev/tty2\n"

#define udhcpc_trivial_usage \
	"[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]"
#define udhcpc_full_usage \
	"\t-c,\t--clientid=CLIENTID\tClient identifier\n" \
	"\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \
	"\t-h,\t                   \tAlias for -H\n" \
	"\t-f,\t--foreground\tDo not fork after getting lease\n" \
	"\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \
	"\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \
	"\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \
	"\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \
	"\t-q,\t--quit\tQuit after obtaining lease\n" \
	"\t-r,\t--request=IP\tIP address to request (default: none)\n" \
	"\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \
	"\t-v,\t--version\tDisplay version"

#define udhcpd_trivial_usage \
	"[configfile]\n" \

#define udhcpd_full_usage \
	""

#ifdef CONFIG_FEATURE_MOUNT_FORCE
  #define USAGE_MOUNT_FORCE(a) a
#else
  #define USAGE_MOUNT_FORCE(a)
#endif
#define umount_trivial_usage \
	"[flags] FILESYSTEM|DIRECTORY"
#define umount_full_usage \
	"Unmount file systems\n" \
	"\nFlags:\n" "\t-a\tUnmount all file systems" \
	USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \
	"\n\t-r\tTry to remount devices as read-only if mount is busy" \
	USAGE_MOUNT_FORCE("\n\t-f\tForce umount (i.e., unreachable NFS server)") \
	USAGE_MOUNT_LOOP("\n\t-l\tDo not free loop device (if a loop device has been used)")
#define umount_example_usage \
	"$ umount /dev/hdc1 \n"

#define uname_trivial_usage \
	"[OPTION]..."
#define uname_full_usage \
	"Print certain system information.  With no OPTION, same as -s.\n\n" \
	"Options:\n" \
	"\t-a\tprint all information\n" \
	"\t-m\tthe machine (hardware) type\n" \
	"\t-n\tprint the machine's network node hostname\n" \
	"\t-r\tprint the operating system release\n" \
	"\t-s\tprint the operating system name\n" \
	"\t-p\tprint the host processor type\n" \
	"\t-v\tprint the operating system version"
#define uname_example_usage \
	"$ uname -a\n" \
	"Linux debian 2.2.15pre13 #5 Tue Mar 14 16:03:50 MST 2000 i686 unknown\n" 

#define uncompress_trivial_usage \
	"[-c] [-f] [ name ... ]"
#define uncompress_full_usage \
	"Uncompress .Z file[s]\n" \
	"Options:\n" \
	"\t-c\textract to stdout\n" \
	"\t-f\tforce overwrite an existing file\n"
	
#define uniq_trivial_usage \
	"[OPTION]... [INPUT [OUTPUT]]"
#define uniq_full_usage \
	"Discard all but one of successive identical lines from INPUT\n" \
	"(or standard input), writing to OUTPUT (or standard output).\n\n" \
	"Options:\n" \
	"\t-c\tprefix lines by the number of occurrences\n" \
	"\t-d\tonly print duplicate lines\n" \
	"\t-u\tonly print unique lines\n" \
	"\t-f N\tskip the first N fields\n" \
	"\t-s N\tskip the first N chars (after any skipped fields)"
#define uniq_example_usage \
	"$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
	"a\n" \
	"b\n" \
	"c\n"

#define unix2dos_trivial_usage \
	"[option] [FILE]"
#define unix2dos_full_usage \
	"Converts FILE from unix format to dos format.  When no option\n" \
	"is given, the input is converted to the opposite output format.\n" \
	"When no file is given, uses stdin for input and stdout for output.\n" \
	"Options:\n" \
	"\t-u\toutput will be in UNIX format\n" \
	"\t-d\toutput will be in DOS format"

#define unzip_trivial_usage \
	"[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
#define unzip_full_usage \
	"Extracts files from ZIP archives.\n\n" \
	"Options:\n" \
	"\t-l\tlist archive contents (short form)\n" \
	"\t-n\tnever overwrite existing files (default)\n" \
	"\t-o\toverwrite files without prompting\n" \
	"\t-p\tsend output to stdout\n" \
	"\t-q\tbe quiet\n" \
	"\t-x\texclude these files\n" \
	"\t-d\textract files into this directory"

#define update_trivial_usage \
	"[options]"
#define update_full_usage \
	"Periodically flushes filesystem buffers.\n\n" \
	"Options:\n" \
	"\t-S\tforce use of sync(2) instead of flushing\n" \
	"\t-s SECS\tcall sync this often (default 30)\n" \
	"\t-f SECS\tflush some buffers this often (default 5)"

#define uptime_trivial_usage \
	""
#define uptime_full_usage \
	"Display the time since the last boot."
#define uptime_example_usage \
	"$ uptime\n" \
	"  1:55pm  up  2:30, load average: 0.09, 0.04, 0.00\n" 

#define usleep_trivial_usage \
	"N" 
#define usleep_full_usage \
	"Pause for N microseconds."
#define usleep_example_usage \
	"$ usleep 1000000\n" \
	"[pauses for 1 second]\n"

#define uudecode_trivial_usage \
	"[FILE]..."
#define uudecode_full_usage \
	"Uudecode a file that is uuencoded.\n\n" \
	"Options:\n" \
	"\t-o FILE\tdirect output to FILE" 
#define uudecode_example_usage \
	"$ uudecode -o busybox busybox.uu\n" \
	"$ ls -l busybox\n" \
	"-rwxr-xr-x   1 ams      ams        245264 Jun  7 21:35 busybox\n" 

#define uuencode_trivial_usage \
	"[OPTION] [INFILE] REMOTEFILE"
#define uuencode_full_usage \
	"Uuencode a file.\n\n" \
	"Options:\n" \
	"\t-m\tuse base64 encoding per RFC1521"
#define uuencode_example_usage \
	"$ uuencode busybox busybox\n" \
	"begin 755 busybox\n" \
	"<encoded file snipped>\n" \
	"$ uudecode busybox busybox > busybox.uu\n" \
	"$\n"

#define vconfig_trivial_usage \
	"COMMAND [OPTIONS] ..."

#define vconfig_full_usage \
"Usage: add             [interface-name] [vlan_id] \n" \
"       rem             [vlan-name] \n" \
"       set_flag        [interface-name] [flag-num]       [0 | 1] \n" \
"       set_egress_map  [vlan-name]      [skb_priority]   [vlan_qos] \n" \
"       set_ingress_map [vlan-name]      [skb_priority]   [vlan_qos] \n" \
"       set_name_type   [name-type] \n" 

#define vi_trivial_usage \
	"[OPTION] [FILE]..."
#define vi_full_usage \
	"edit FILE.\n\n" \
	"Options:\n" \
	"\t-R\tRead-only- do not write to the file." 

#define vlock_trivial_usage \
	"[OPTIONS]"
#define vlock_full_usage \
	"Lock a virtual terminal.  A password is required to unlock\n" \
	"Options:\n" \
	"\t-a\tLock all VTs"

#define watch_trivial_usage \
	"[-n <seconds>] COMMAND..."
#define watch_full_usage \
	"Executes a program periodically.\n" \
	"Options:\n" \
	"\t-n\tLoop period in seconds - default is 2." 
#define watch_example_usage \
	"$ watch date\n" \
	"Mon Dec 17 10:31:40 GMT 2000\n" \
	"Mon Dec 17 10:31:42 GMT 2000\n" \
	"Mon Dec 17 10:31:44 GMT 2000" 

#define watchdog_trivial_usage \
	"DEV"
#define watchdog_full_usage \
	"Periodically write to watchdog device DEV"

#define wc_trivial_usage \
	"[OPTION]... [FILE]..."
#define wc_full_usage \
	"Print line, word, and byte counts for each FILE, and a total line if\n" \
	"more than one FILE is specified.  With no FILE, read standard input.\n\n" \
	"Options:\n" \
	"\t-c\tprint the byte counts\n" \
	"\t-l\tprint the newline counts\n" \
	"\t-L\tprint the length of the longest line\n" \
	"\t-w\tprint the word counts"
#define wc_example_usage \
	"$ wc /etc/passwd\n" \
	"     31      46    1365 /etc/passwd\n" 

#define wget_trivial_usage \
	"[-c|--continue] [-q|--quiet] [-O|--output-document file]\n\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
#define wget_full_usage \
	"wget retrieves files via HTTP or FTP\n\n" \
	"Options:\n" \
	"\t-c\tcontinue retrieval of aborted transfers\n" \
	"\t-q\tquiet mode - do not print\n" \
	"\t-P\tSet directory prefix to DIR\n" \
	"\t-O\tsave to filename ('-' for stdout)\n" \
	"\t-Y\tuse proxy ('on' or 'off')"

#define which_trivial_usage \
	"[COMMAND ...]"
#define which_full_usage \
	"Locates a COMMAND."
#define which_example_usage \
	"$ which login\n" \
	"/bin/login\n"

#define who_trivial_usage \
        " "
#define who_full_usage \
        "Prints the current user names and related information"

#define whoami_trivial_usage \
	""
#define whoami_full_usage \
	"Prints the user name associated with the current effective user id."

#define xargs_trivial_usage \
	"[COMMAND] [-prt] [ARGS...]"
#define xargs_full_usage \
	"Executes COMMAND on every item given by standard input.\n\n" \
	"Options:\n" \
	"\t-p\tPrompt the user about whether to run each command\n" \
	"\t-r\tDo not run command for empty readed lines\n" \
	"\t-t\tPrint the command line on stderr before executing it."
#define xargs_example_usage \
	"$ ls | xargs gzip\n" \
	"$ find . -name '*.c' -print | xargs rm\n" 

#define yes_trivial_usage \
	"[OPTION]... [STRING]..."
#define yes_full_usage \
	"Repeatedly outputs a line with all specified STRING(s), or 'y'."

#define zcat_trivial_usage \
	"FILE"
#define zcat_full_usage \
	"Uncompress to stdout."