update

2 files changed, 205 insertions, 162 deletions

diff --git a/src/index.md b/src/index.md
index 17e0008..abeeb03 100644
--- a/src/index.md
+++ b/src/index.md
@@ -56,16 +56,19 @@ News
 
 [RSS Feed](/news.xml)
 
-### Apr 10 2020
+Apr 10 2020
+-----------
 
 IRC channel can now be accessed from `#carbslinux` at freenode!
 
-### Apr 06 2020
+Apr 06 2020
+-----------
 
 A new rootfs tarball has been released. See the
 [downloads](https://dl.carbslinux.org) page
 
-### Apr 05 2020
+Apr 05 2020
+-----------
 
 Carbs Linux repositories will be hosted only on Github. Commits will be
 pushed there, and not the repository. You have until
@@ -78,162 +81,3 @@ repository directory.
 
     git remote set-url origin https://github.com/CarbsLinux/repository
 
-
-### Feb 18 2020
-
-A new tarball is released. It can be found on <https://dl.carbslinux.org>.
-
-**edit:** I have removed the tarball because of a bootstrapping issue. 
-I will be re-adding it later today.
-
-**edit 2:** I have added a tarball (20200219) to reflect my recent
-changes on Busybox.
-
-
-### Feb 14 2020
-
-**IMPORTANT!** Carbs-init update to be released on 17th of February
-will require manual intervention. I am holding this update back so
-people can see it before they update their system (even though the
-update will show the same message as this). The rationale for the
-update is explained below the intervention.
-
-    # There is an explanation for each init
-    # You only need to follow the instructions
-    # for your own init-system
-
-    ## busybox-init
-    # If you did not edit your inittab simply 
-    # move inittab.new to inittab
-    -> mv /etc/inittab.new /etc/inittab
-
-    # If you did edit your inittab you can use
-    # a simple sed command to remove the necessary lines
-    -> sed -i '/getty/d;/runsvdir/d' /etc/inittab
-
-
-    ## runit
-    # same as busybox-init, if you did not edit
-    # /etc/runit/2 move 2.new to 2
-    -> mv /etc/runit/2.new /etc/runit/2
-
-    # else
-    -> vim /etc/runit/2
-    # open your 2 file and remove the for loop containing
-    # getty commands. If you are using runit, it is recommended
-    # to comment out /etc/init/runit.boot
-
-    ## sinit/minit
-    # If you did not edit your {sinit-,}launch-services.boot
-    # you can simply remove it.
-    -> rm -f /etc/init/launch-services.boot /etc/init/sinit-launch-services.boot
-
-    # This should leave you without any issues, and you can safely reboot.
-
-Carbs-init update is to make sure init systems do not clash, and do
-not have to use different files. This is a sensible update both for
-the user user and for the maintainer side. 
-
-To give an example, before this update busybox-init was managing getty
-through `inittab`, runit was managing through `/etc/runit/2`, and
-minit/sinit were launching from `/etc/init/launch-services.boot`. This
-is a configuration nightmare for everyone, and since I am maintaining
-and constantly testing those init providers, a huge nightmare for me. 
-This is a Quality of Life update.
-
-
-### Feb 13 2020
-
-Runit is now released on the core repository! You can now replace
-busybox-init with runit-init. You can also replace the busybox runit
-utilities with the actual runit. This will reduce the dependency on
-busybox greatly.
-
-### Jan 28 2020
-
-Web Server is now on a Carbs Linux server. It is not complete yet,
-but I will be adding a little more for the intended functionality.
-Downtimes can be expected.
-
-UPDATE: ssl is now working.
-
-UPDATE2: downloads are back again.
-
-
-### Jan 22 2020
-
-Expect downtime on Jan 24 2020 22:00 UTC as I will be migrating
-this web server to my Carbs Linux server!
-
-
-### Jan 15 2020
-
-sinit has been taken to `core`, and is now officially supported
-
-
-### Jan 13 2020
-
-**Busybox update reqires manual intervention**
-
-The new busybox package conflicts with the pre-update busybox-init. That's why
-you should rebuild and install `busybox-init` before doing the update.
-
-    # Do a kiss update first (but don't actually update it yet), or manually pull the git repository
-    $ kiss u  # Cancel this operation after it asks for you to confirm the update
-    
-    # Install the busybox-init package
-    $ kiss b busybox-init && kiss i busybox-init
-    
-    # Continue your update as you normally would.
-    $ kiss u
-
-I have moved runit and logging utilities from the busybox-init package to the busybox
-package, which is the cause of these conflicts.
-
-### Jan 10 2020
-
-carbs-rootfs-20200110.tar.xz was [released](//dl.carbslinux.org/releases)
-
-
-### Jan 09 2020
-
-Happy new year, everyone! I am back after some long silence. I was unable to commit for a
-while, but I have pulled some new updates from the KISS repository, added some of my own.
-This week I will be changing/adding some things.
-
-Important things are,
-
-* Carbs-init was updated to 0.3.
-* I will be adding an implementation of suckless.org's [sinit](//core.suckless.org/sinit) as `carbs-sinit`
-* Carbs Repository was added to [repology.org](//repology.org/repository/carbs)
-* A new rootfs tarball will be coming up tomorrow.
-
-
-### Dec 18 2019
-
-carbs-rootfs-20191218.tar.xz was [released](//dl.carbslinux.org/releases)
-
-
-### Dec 17 2019
-
-Installation instruction are now complete. A review would be greatly appreciated!
-
-
-### Dec 15 2019
-
-Carbs Linux Wiki is now available to be edited and updated by the users go
-to the [wiki](//carbslinux.org/wiki) to obtain more information.
-
-**February 2020 EDIT:** Changed link for wiki
-
-
-### Dec 12 2019
-
-Busybox and Busybox-init has been seperated into two different packages.
-This is for adding standalone runit/runit-init to the repositories.
-
-
-### Dec 10 2019
-
-First alpha release was made. See the [downloads page](//dl.carbslinux.org/releases).
-
diff --git a/src/news.md b/src/news.md
new file mode 100644
index 0000000..e433732
--- /dev/null
+++ b/src/news.md
@@ -0,0 +1,199 @@
+
+Apr 10 2020
+-----------
+
+IRC channel can now be accessed from `#carbslinux` at freenode!
+
+Apr 06 2020
+-----------
+
+A new rootfs tarball has been released. See the
+[downloads](https://dl.carbslinux.org) page
+
+Apr 05 2020
+-----------
+
+Carbs Linux repositories will be hosted only on Github. Commits will be
+pushed there, and not the repository. You have until
+May 4, 2020 Monday to switch your remotes to <https://github.com/CarbsLinux/repository>.
+The git repository will continue to be served until then (without additional
+commits).
+
+You can switch your remote by executing the following command on your
+repository directory.
+
+    git remote set-url origin https://github.com/CarbsLinux/repository
+
+
+Feb 18 2020
+-----------
+
+A new tarball is released. It can be found on <https://dl.carbslinux.org>.
+
+**edit:** I have removed the tarball because of a bootstrapping issue. 
+I will be re-adding it later today.
+
+**edit 2:** I have added a tarball (20200219) to reflect my recent
+changes on Busybox.
+
+
+Feb 14 2020
+-----------
+
+**IMPORTANT!** Carbs-init update to be released on 17th of February
+will require manual intervention. I am holding this update back so
+people can see it before they update their system (even though the
+update will show the same message as this). The rationale for the
+update is explained below the intervention.
+
+    # There is an explanation for each init
+    # You only need to follow the instructions
+    # for your own init-system
+
+    ## busybox-init
+    # If you did not edit your inittab simply 
+    # move inittab.new to inittab
+    -> mv /etc/inittab.new /etc/inittab
+
+    # If you did edit your inittab you can use
+    # a simple sed command to remove the necessary lines
+    -> sed -i '/getty/d;/runsvdir/d' /etc/inittab
+
+
+    ## runit
+    # same as busybox-init, if you did not edit
+    # /etc/runit/2 move 2.new to 2
+    -> mv /etc/runit/2.new /etc/runit/2
+
+    # else
+    -> vim /etc/runit/2
+    # open your 2 file and remove the for loop containing
+    # getty commands. If you are using runit, it is recommended
+    # to comment out /etc/init/runit.boot
+
+    ## sinit/minit
+    # If you did not edit your {sinit-,}launch-services.boot
+    # you can simply remove it.
+    -> rm -f /etc/init/launch-services.boot /etc/init/sinit-launch-services.boot
+
+    # This should leave you without any issues, and you can safely reboot.
+
+Carbs-init update is to make sure init systems do not clash, and do
+not have to use different files. This is a sensible update both for
+the user user and for the maintainer side. 
+
+To give an example, before this update busybox-init was managing getty
+through `inittab`, runit was managing through `/etc/runit/2`, and
+minit/sinit were launching from `/etc/init/launch-services.boot`. This
+is a configuration nightmare for everyone, and since I am maintaining
+and constantly testing those init providers, a huge nightmare for me. 
+This is a Quality of Life update.
+
+
+Feb 13 2020
+-----------
+
+Runit is now released on the core repository! You can now replace
+busybox-init with runit-init. You can also replace the busybox runit
+utilities with the actual runit. This will reduce the dependency on
+busybox greatly.
+
+Jan 28 2020
+-----------
+
+Web Server is now on a Carbs Linux server. It is not complete yet,
+but I will be adding a little more for the intended functionality.
+Downtimes can be expected.
+
+UPDATE: ssl is now working.
+
+UPDATE2: downloads are back again.
+
+
+Jan 22 2020
+-----------
+
+Expect downtime on Jan 24 2020 22:00 UTC as I will be migrating
+this web server to my Carbs Linux server!
+
+
+Jan 15 2020
+-----------
+
+sinit has been taken to `core`, and is now officially supported
+
+
+Jan 13 2020
+-----------
+
+**Busybox update reqires manual intervention**
+
+The new busybox package conflicts with the pre-update busybox-init. That's why
+you should rebuild and install `busybox-init` before doing the update.
+
+    # Do a kiss update first (but don't actually update it yet), or manually pull the git repository
+    $ kiss u  # Cancel this operation after it asks for you to confirm the update
+    
+    # Install the busybox-init package
+    $ kiss b busybox-init && kiss i busybox-init
+    
+    # Continue your update as you normally would.
+    $ kiss u
+
+I have moved runit and logging utilities from the busybox-init package to the busybox
+package, which is the cause of these conflicts.
+
+Jan 10 2020
+-----------
+
+carbs-rootfs-20200110.tar.xz was [released](//dl.carbslinux.org/releases)
+
+
+Jan 09 2020
+-----------
+
+Happy new year, everyone! I am back after some long silence. I was unable to commit for a
+while, but I have pulled some new updates from the KISS repository, added some of my own.
+This week I will be changing/adding some things.
+
+Important things are,
+
+* Carbs-init was updated to 0.3.
+* I will be adding an implementation of suckless.org's [sinit](//core.suckless.org/sinit) as `carbs-sinit`
+* Carbs Repository was added to [repology.org](//repology.org/repository/carbs)
+* A new rootfs tarball will be coming up tomorrow.
+
+
+Dec 18 2019
+-----------
+
+carbs-rootfs-20191218.tar.xz was [released](//dl.carbslinux.org/releases)
+
+
+Dec 17 2019
+-----------
+
+Installation instruction are now complete. A review would be greatly appreciated!
+
+
+Dec 15 2019
+-----------
+
+Carbs Linux Wiki is now available to be edited and updated by the users go
+to the [wiki](//carbslinux.org/wiki) to obtain more information.
+
+**February 2020 EDIT:** Changed link for wiki
+
+
+Dec 12 2019
+-----------
+
+Busybox and Busybox-init has been seperated into two different packages.
+This is for adding standalone runit/runit-init to the repositories.
+
+
+Dec 10 2019
+-----------
+
+First alpha release was made. See the [downloads page](//dl.carbslinux.org/releases).
+