aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBartosz Golaszewski <bartekgola@gmail.com>2015-02-10 03:16:25 +0100
committerDenys Vlasenko <vda.linux@googlemail.com>2015-02-10 03:16:25 +0100
commit622a7aab2c4a918c0e71931505f5c38d66d81ad9 (patch)
tree14e3d6b24e538a7c911234cf13020fc7dce2f45d
parent8c06bc6ba14949d945eff0abcabab885f1ef7680 (diff)
downloadbusybox-622a7aab2c4a918c0e71931505f5c38d66d81ad9.tar.gz
i2cget, i2cset, i2cdetect, i2cdump: new applets
Add a minimal implementation of i2cget, i2cset, i2cdump and i2cdetect tools. Supports most features of upstream i2c-tools. function old new delta i2cdump_main - 1444 +1444 i2cset_main - 1239 +1239 i2cdetect_main - 611 +611 list_i2c_busses_and_exit - 532 +532 packed_usage 29975 30438 +463 i2cget_main - 380 +380 check_read_funcs - 140 +140 i2c_funcs_tab - 128 +128 confirm_action - 100 +100 i2c_dev_open - 57 +57 i2c_smbus_access - 44 +44 confirm_or_abort - 43 +43 check_funcs_test_end - 39 +39 i2c_smbus_read_word_data - 38 +38 i2c_smbus_read_byte_data - 38 +38 i2c_smbus_read_byte - 37 +37 i2c_set_slave_addr - 32 +32 applet_names 2480 2512 +32 adap_descs - 32 +32 i2c_set_pec - 29 +29 get_funcs_matrix - 21 +21 i2c_parse_data_addr - 18 +18 i2c_parse_bus_addr - 18 +18 i2c_bus_lookup - 18 +18 i2c_smbus_write_byte - 17 +17 applet_main 1440 1456 +16 will_skip - 14 +14 no_support - 11 +11 applet_nameofs 720 728 +8 applet_install_loc 180 182 +2 ------------------------------------------------------------------------------ (add/remove: 26/0 grow/shrink: 5/0 up/down: 5601/0) Total: 5601 bytes Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
-rw-r--r--miscutils/i2c_tools.c1396
1 files changed, 1396 insertions, 0 deletions
diff --git a/miscutils/i2c_tools.c b/miscutils/i2c_tools.c
new file mode 100644
index 000000000..90d1e1e14
--- /dev/null
+++ b/miscutils/i2c_tools.c
@@ -0,0 +1,1396 @@
+/* vi: set sw=4 ts=4: */
+/*
+ * Minimal i2c-tools implementation for busybox.
+ * Parts of code ported from i2c-tools:
+ * http://www.lm-sensors.org/wiki/I2CTools.
+ *
+ * Copyright (C) 2014 by Bartosz Golaszewski <bartekgola@gmail.com>
+ *
+ * Licensed under GPLv2 or later, see file LICENSE in this source tree.
+ */
+
+//config:config I2CGET
+//config: bool "i2cget"
+//config: default y
+//config: select PLATFORM_LINUX
+//config: help
+//config: Read from I2C/SMBus chip registers.
+//config:
+//config:config I2CSET
+//config: bool "i2cset"
+//config: default y
+//config: select PLATFORM_LINUX
+//config: help
+//config: Set I2C registers.
+//config:
+//config:config I2CDUMP
+//config: bool "i2cdump"
+//config: default y
+//config: select PLATFORM_LINUX
+//config: help
+//config: Examine I2C registers.
+//config:
+//config:config I2CDETECT
+//config: bool "i2cdetect"
+//config: default y
+//config: select PLATFORM_LINUX
+//config: help
+//config: Detect I2C chips.
+//config:
+
+//applet:IF_I2CGET(APPLET(i2cget, BB_DIR_USR_SBIN, BB_SUID_DROP))
+//applet:IF_I2CSET(APPLET(i2cset, BB_DIR_USR_SBIN, BB_SUID_DROP))
+//applet:IF_I2CDUMP(APPLET(i2cdump, BB_DIR_USR_SBIN, BB_SUID_DROP))
+//applet:IF_I2CDETECT(APPLET(i2cdetect, BB_DIR_USR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_I2CGET) += i2c_tools.o
+//kbuild:lib-$(CONFIG_I2CSET) += i2c_tools.o
+//kbuild:lib-$(CONFIG_I2CDUMP) += i2c_tools.o
+//kbuild:lib-$(CONFIG_I2CDETECT) += i2c_tools.o
+
+/*
+ * Unsupported stuff:
+ *
+ * - upstream i2c-tools can also look-up i2c busses by name, we only accept
+ * numbers,
+ * - bank and bankreg parameters for i2cdump are not supported because of
+ * their limited usefulness (see i2cdump manual entry for more info),
+ * - i2cdetect doesn't look for bus info in /proc as it does in upstream, but
+ * it shouldn't be a problem in modern kernels.
+ */
+
+#include "libbb.h"
+
+/*
+ * /dev/i2c-X ioctl commands. The ioctl's parameter is always an unsigned long,
+ * except for:
+ * - I2C_FUNCS, takes pointer to an unsigned long
+ * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
+ * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
+ */
+
+/*
+ * NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
+ * are not supported due to code brokenness.
+ */
+
+/* Use this slave address. */
+#define I2C_SLAVE 0x0703
+/* Use this slave address, even if it is already in use by a driver. */
+#define I2C_SLAVE_FORCE 0x0706
+/* 0 for 7 bit addrs, != 0 for 10 bit. */
+#define I2C_TENBIT 0x0704
+/* Get the adapter functionality mask. */
+#define I2C_FUNCS 0x0705
+/* Combined R/W transfer (one STOP only). */
+#define I2C_RDWR 0x0707
+/* != 0 to use PEC with SMBus. */
+#define I2C_PEC 0x0708
+/* SMBus transfer. */
+#define I2C_SMBUS 0x0720
+
+/* Structure used in the I2C_SMBUS ioctl call. */
+struct i2c_smbus_ioctl_data {
+ uint8_t read_write;
+ uint8_t command;
+ uint32_t size;
+ union i2c_smbus_data *data;
+};
+
+/* Structure used in the I2C_RDWR ioctl call. */
+struct i2c_rdwr_ioctl_data {
+ struct i2c_msg *msgs; /* Pointers to i2c_msgs. */
+ uint32_t nmsgs; /* Number of i2c_msgs. */
+};
+
+/* As specified in SMBus standard. */
+#define I2C_SMBUS_BLOCK_MAX 32
+/* Not specified but we use same structure. */
+#define I2C_SMBUS_I2C_BLOCK_MAX 32
+
+/* Data for SMBus Messages. */
+union i2c_smbus_data {
+ uint8_t byte;
+ uint16_t word;
+ /* block[0] is used for length and one more for PEC */
+ uint8_t block[I2C_SMBUS_BLOCK_MAX + 2];
+};
+
+#define I2C_RDRW_IOCTL_MAX_MSGS 42
+#define I2C_MAX_REGS 256
+
+/* Smbus_access read or write markers. */
+#define I2C_SMBUS_READ 1
+#define I2C_SMBUS_WRITE 0
+
+/* SMBus transaction types (size parameter in the below functions). */
+#define I2C_SMBUS_QUICK 0
+#define I2C_SMBUS_BYTE 1
+#define I2C_SMBUS_BYTE_DATA 2
+#define I2C_SMBUS_WORD_DATA 3
+#define I2C_SMBUS_PROC_CALL 4
+#define I2C_SMBUS_BLOCK_DATA 5
+#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
+#define I2C_SMBUS_BLOCK_PROC_CALL 7
+#define I2C_SMBUS_I2C_BLOCK_DATA 8
+
+#define DETECT_MODE_AUTO 0
+#define DETECT_MODE_QUICK 1
+#define DETECT_MODE_READ 2
+
+/* Defines to determine what functionality is present. */
+#define I2C_FUNC_I2C 0x00000001
+#define I2C_FUNC_10BIT_ADDR 0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004
+#define I2C_FUNC_SMBUS_PEC 0x00000008
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000
+#define I2C_FUNC_SMBUS_QUICK 0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000
+
+#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
+ I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
+ I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+/*
+ * This is needed for ioctl_or_perror_and_die() since it only accepts pointers.
+ */
+static ALWAYS_INLINE void *itoptr(int i)
+{
+ return (void*)(intptr_t)i;
+}
+
+static int32_t i2c_smbus_access(int fd, char read_write, uint8_t cmd,
+ int size, union i2c_smbus_data *data)
+{
+ struct i2c_smbus_ioctl_data args;
+
+ args.read_write = read_write;
+ args.command = cmd;
+ args.size = size;
+ args.data = data;
+
+ return ioctl(fd, I2C_SMBUS, &args);
+}
+
+static int32_t i2c_smbus_read_byte(int fd)
+{
+ union i2c_smbus_data data;
+ int err;
+
+ err = i2c_smbus_access(fd, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &data);
+ if (err < 0)
+ return err;
+
+ return data.byte;
+}
+
+#if ENABLE_I2CGET || ENABLE_I2CSET || ENABLE_I2CDUMP
+static int32_t i2c_smbus_write_byte(int fd, uint8_t val)
+{
+ return i2c_smbus_access(fd, I2C_SMBUS_WRITE,
+ val, I2C_SMBUS_BYTE, NULL);
+}
+
+static int32_t i2c_smbus_read_byte_data(int fd, uint8_t cmd)
+{
+ union i2c_smbus_data data;
+ int err;
+
+ err = i2c_smbus_access(fd, I2C_SMBUS_READ, cmd,
+ I2C_SMBUS_BYTE_DATA, &data);
+ if (err < 0)
+ return err;
+
+ return data.byte;
+}
+
+static int32_t i2c_smbus_read_word_data(int fd, uint8_t cmd)
+{
+ union i2c_smbus_data data;
+ int err;
+
+ err = i2c_smbus_access(fd, I2C_SMBUS_READ, cmd,
+ I2C_SMBUS_WORD_DATA, &data);
+ if (err < 0)
+ return err;
+
+ return data.word;
+}
+#endif /* ENABLE_I2CGET || ENABLE_I2CSET || ENABLE_I2CDUMP */
+
+#if ENABLE_I2CSET
+static int32_t i2c_smbus_write_byte_data(int file,
+ uint8_t cmd, uint8_t value)
+{
+ union i2c_smbus_data data;
+
+ data.byte = value;
+
+ return i2c_smbus_access(file, I2C_SMBUS_WRITE, cmd,
+ I2C_SMBUS_BYTE_DATA, &data);
+}
+
+static int32_t i2c_smbus_write_word_data(int file, uint8_t cmd, uint16_t value)
+{
+ union i2c_smbus_data data;
+
+ data.word = value;
+
+ return i2c_smbus_access(file, I2C_SMBUS_WRITE, cmd,
+ I2C_SMBUS_WORD_DATA, &data);
+}
+
+static int32_t i2c_smbus_write_block_data(int file, uint8_t cmd,
+ uint8_t length, const uint8_t *values)
+{
+ union i2c_smbus_data data;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+
+ memcpy(data.block+1, values, length);
+ data.block[0] = length;
+
+ return i2c_smbus_access(file, I2C_SMBUS_WRITE, cmd,
+ I2C_SMBUS_BLOCK_DATA, &data);
+}
+
+static int32_t i2c_smbus_write_i2c_block_data(int file, uint8_t cmd,
+ uint8_t length, const uint8_t *values)
+{
+ union i2c_smbus_data data;
+
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+
+ memcpy(data.block+1, values, length);
+ data.block[0] = length;
+
+ return i2c_smbus_access(file, I2C_SMBUS_WRITE, cmd,
+ I2C_SMBUS_I2C_BLOCK_BROKEN, &data);
+}
+#endif /* ENABLE_I2CSET */
+
+#if ENABLE_I2CDUMP
+/*
+ * Returns the number of bytes read, vals must hold at
+ * least I2C_SMBUS_BLOCK_MAX bytes.
+ */
+static int32_t i2c_smbus_read_block_data(int fd, uint8_t cmd, uint8_t *vals)
+{
+ union i2c_smbus_data data;
+ int i, err;
+
+ err = i2c_smbus_access(fd, I2C_SMBUS_READ, cmd,
+ I2C_SMBUS_BLOCK_DATA, &data);
+ if (err < 0)
+ return err;
+
+ for (i = 1; i <= data.block[0]; i++)
+ *vals++ = data.block[i];
+ return data.block[0];
+}
+
+static int32_t i2c_smbus_read_i2c_block_data(int fd, uint8_t cmd,
+ uint8_t len, uint8_t *vals)
+{
+ union i2c_smbus_data data;
+ int i, err;
+
+ if (len > I2C_SMBUS_BLOCK_MAX)
+ len = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = len;
+
+ err = i2c_smbus_access(fd, I2C_SMBUS_READ, cmd,
+ len == 32 ? I2C_SMBUS_I2C_BLOCK_BROKEN :
+ I2C_SMBUS_I2C_BLOCK_DATA, &data);
+ if (err < 0)
+ return err;
+
+ for (i = 1; i <= data.block[0]; i++)
+ *vals++ = data.block[i];
+ return data.block[0];
+}
+#endif /* ENABLE_I2CDUMP */
+
+#if ENABLE_I2CDETECT
+static int32_t i2c_smbus_write_quick(int fd, uint8_t val)
+{
+ return i2c_smbus_access(fd, val, 0, I2C_SMBUS_QUICK, NULL);
+}
+#endif /* ENABLE_I2CDETECT */
+
+static int i2c_bus_lookup(const char *bus_str)
+{
+ return xstrtou_range(bus_str, 10, 0, 0xfffff);
+}
+
+#if ENABLE_I2CGET || ENABLE_I2CSET || ENABLE_I2CDUMP
+static int i2c_parse_bus_addr(const char *addr_str)
+{
+ /* Slave address must be in range 0x03 - 0x77. */
+ return xstrtou_range(addr_str, 16, 0x03, 0x77);
+}
+
+static void i2c_set_pec(int fd, int pec)
+{
+ ioctl_or_perror_and_die(fd, I2C_PEC,
+ itoptr(pec ? 1 : 0),
+ "can't set PEC");
+}
+#endif /* ENABLE_I2CGET || ENABLE_I2CSET || ENABLE_I2CDUMP */
+
+#if ENABLE_I2CGET || ENABLE_I2CSET
+static int i2c_parse_data_addr(const char *data_addr)
+{
+ /* Data address must be an 8 bit integer. */
+ return xstrtou_range(data_addr, 16, 0, 0xff);
+}
+#endif /* ENABLE_I2CGET || ENABLE_I2CSET */
+
+/*
+ * Opens the device file associated with given i2c bus.
+ *
+ * Upstream i2c-tools also support opening devices by i2c bus name
+ * but we drop it here for size reduction.
+ */
+static int i2c_dev_open(int i2cbus)
+{
+ char filename[sizeof("/dev/i2c-%d") + sizeof(int)*3];
+ int fd;
+
+ sprintf(filename, "/dev/i2c-%d", i2cbus);
+ fd = open(filename, O_RDWR);
+ if (fd < 0) {
+ filename[8] = '/'; /* change to "/dev/i2c/%d" */
+ fd = xopen(filename, O_RDWR);
+ }
+
+ return fd;
+}
+
+static void i2c_set_slave_addr(int fd, int addr, int force)
+{
+ ioctl_or_perror_and_die(fd, force ? I2C_SLAVE_FORCE : I2C_SLAVE,
+ itoptr(addr),
+ "can't set address to 0x%02x", addr);
+}
+
+/* Size reducing helpers for xxx_check_funcs(). */
+static void get_funcs_matrix(int fd, unsigned long *funcs)
+{
+ ioctl_or_perror_and_die(fd, I2C_FUNCS, funcs,
+ "can't get adapter functionality matrix");
+}
+
+#if ENABLE_I2CGET || ENABLE_I2CSET || ENABLE_I2CDUMP
+static void check_funcs_test_end(int funcs, int pec, const char *err)
+{
+ if (pec && !(funcs & (I2C_FUNC_SMBUS_PEC | I2C_FUNC_I2C)))
+ bb_error_msg("warning: adapter does not support PEC");
+
+ if (err)
+ bb_error_msg_and_die(
+ "adapter has no %s capability", err);
+}
+#endif /* ENABLE_I2CGET || ENABLE_I2CSET || ENABLE_I2CDUMP */
+
+/*
+ * The below functions emit an error message and exit if the adapter doesn't
+ * support desired functionalities.
+ */
+#if ENABLE_I2CGET || ENABLE_I2CDUMP
+static void check_read_funcs(int fd, int mode, int data_addr, int pec)
+{
+ unsigned long funcs;
+ const char *err = NULL;
+
+ get_funcs_matrix(fd, &funcs);
+ switch (mode) {
+ case I2C_SMBUS_BYTE:
+ if (!(funcs & I2C_FUNC_SMBUS_READ_BYTE)) {
+ err = "SMBus receive byte";
+ break;
+ }
+ if (data_addr >= 0 && !(funcs & I2C_FUNC_SMBUS_WRITE_BYTE))
+ err = "SMBus send byte";
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (!(funcs & I2C_FUNC_SMBUS_READ_BYTE_DATA))
+ err = "SMBus read byte";
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (!(funcs & I2C_FUNC_SMBUS_READ_WORD_DATA))
+ err = "SMBus read word";
+ break;
+#if ENABLE_I2CDUMP
+ case I2C_SMBUS_BLOCK_DATA:
+ if (!(funcs & I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+ err = "SMBus block read";
+ break;
+
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (!(funcs & I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+ err = "I2C block read";
+ break;
+#endif /* ENABLE_I2CDUMP */
+ default:
+ bb_error_msg_and_die("Programmer goofed!");
+ }
+ check_funcs_test_end(funcs, pec, err);
+}
+#endif /* ENABLE_I2CGET || ENABLE_I2CDUMP */
+
+#if ENABLE_I2CSET
+static void check_write_funcs(int fd, int mode, int pec)
+{
+ unsigned long funcs;
+ const char *err = NULL;
+
+ get_funcs_matrix(fd, &funcs);
+ switch (mode) {
+ case I2C_SMBUS_BYTE:
+ if (!(funcs & I2C_FUNC_SMBUS_WRITE_BYTE))
+ err = "SMBus send byte";
+ break;
+
+ case I2C_SMBUS_BYTE_DATA:
+ if (!(funcs & I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ err = "SMBus write byte";
+ break;
+
+ case I2C_SMBUS_WORD_DATA:
+ if (!(funcs & I2C_FUNC_SMBUS_WRITE_WORD_DATA))
+ err = "SMBus write word";
+ break;
+
+ case I2C_SMBUS_BLOCK_DATA:
+ if (!(funcs & I2C_FUNC_SMBUS_WRITE_BLOCK_DATA))
+ err = "SMBus block write";
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ if (!(funcs & I2C_FUNC_SMBUS_WRITE_I2C_BLOCK))
+ err = "I2C block write";
+ break;
+ }
+ check_funcs_test_end(funcs, pec, err);
+}
+#endif /* ENABLE_I2CSET */
+
+static void confirm_or_abort(void)
+{
+ fprintf(stderr, "Continue? [y/N] ");
+ fflush_all();
+ if (!bb_ask_confirmation())
+ bb_error_msg_and_die("aborting");
+}
+
+/*
+ * Return only if user confirms the action, abort otherwise.
+ *
+ * The messages displayed here are much less elaborate than their i2c-tools
+ * counterparts - this is done for size reduction.
+ */
+static void confirm_action(int bus_addr, int mode, int data_addr, int pec)
+{
+ bb_error_msg("WARNING! This program can confuse your I2C bus");
+
+ /* Don't let the user break his/her EEPROMs */
+ if (bus_addr >= 0x50 && bus_addr <= 0x57 && pec) {
+ bb_error_msg_and_die("this is I2C not smbus - using PEC on I2C "
+ "devices may result in data loss, aborting");
+ }
+
+ if (mode == I2C_SMBUS_BYTE && data_addr >= 0 && pec)
+ bb_error_msg("WARNING! May interpret a write byte command "
+ "with PEC as a write byte data command");
+
+ if (pec)
+ bb_error_msg("PEC checking enabled");
+
+ confirm_or_abort();
+}
+
+#if ENABLE_I2CGET
+//usage:#define i2cget_trivial_usage
+//usage: "[-f] [-y] BUS CHIP-ADDRESS [DATA-ADDRESS [MODE]]"
+//usage:#define i2cget_full_usage "\n\n"
+//usage: "Read from I2C/SMBus chip registers\n"
+//usage: "\n I2CBUS i2c bus number"
+//usage: "\n ADDRESS 0x03 - 0x77"
+//usage: "\nMODE is:"
+//usage: "\n b read byte data (default)"
+//usage: "\n w read word data"
+//usage: "\n c write byte/read byte"
+//usage: "\n Append p for SMBus PEC"
+//usage: "\n"
+//usage: "\n -f force access"
+//usage: "\n -y disable interactive mode"
+int i2cget_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
+int i2cget_main(int argc UNUSED_PARAM, char **argv)
+{
+ const unsigned opt_f = (1 << 0), opt_y = (1 << 1);
+ const char *const optstr = "fy";
+
+ int bus_num, bus_addr, data_addr = -1, status;
+ int mode = I2C_SMBUS_BYTE, pec = 0, fd;
+ unsigned opts;
+
+ opt_complementary = "-2:?4"; /* from 2 to 4 args */
+ opts = getopt32(argv, optstr);
+ argv += optind;
+
+ bus_num = i2c_bus_lookup(argv[0]);
+ bus_addr = i2c_parse_bus_addr(argv[1]);
+
+ if (argv[2]) {
+ data_addr = i2c_parse_data_addr(argv[2]);
+ mode = I2C_SMBUS_BYTE_DATA;
+ if (argv[3]) {
+ switch (argv[3][0]) {
+ case 'b': /* Already set */ break;
+ case 'w': mode = I2C_SMBUS_WORD_DATA; break;
+ case 'c': mode = I2C_SMBUS_BYTE; break;
+ default:
+ bb_error_msg("invalid mode");
+ bb_show_usage();
+ }
+ pec = argv[3][1] == 'p';
+ }
+ }
+
+ fd = i2c_dev_open(bus_num);
+ check_read_funcs(fd, mode, data_addr, pec);
+ i2c_set_slave_addr(fd, bus_addr, opts & opt_f);
+
+ if (!(opts & opt_y))
+ confirm_action(bus_addr, mode, data_addr, pec);
+
+ if (pec)
+ i2c_set_pec(fd, 1);
+
+ switch (mode) {
+ case I2C_SMBUS_BYTE:
+ if (data_addr >= 0) {
+ status = i2c_smbus_write_byte(fd, data_addr);
+ if (status < 0)
+ bb_error_msg("warning - write failed");
+ }
+ status = i2c_smbus_read_byte(fd);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ status = i2c_smbus_read_word_data(fd, data_addr);
+ break;
+ default: /* I2C_SMBUS_BYTE_DATA */
+ status = i2c_smbus_read_byte_data(fd, data_addr);
+ }
+ close(fd);
+
+ if (status < 0)
+ bb_perror_msg_and_die("read failed");
+
+ printf("0x%0*x\n", mode == I2C_SMBUS_WORD_DATA ? 4 : 2, status);
+
+ return 0;
+}
+#endif /* ENABLE_I2CGET */
+
+#if ENABLE_I2CSET
+//usage:#define i2cset_trivial_usage
+//usage: "[-f] [-y] [-m MASK] BUS CHIP-ADDR DATA-ADDR [VALUE] ... [MODE]"
+//usage:#define i2cset_full_usage "\n\n"
+//usage: "Set I2C registers\n"
+//usage: "\n I2CBUS i2c bus number"
+//usage: "\n ADDRESS 0x03 - 0x77"
+//usage: "\nMODE is:"
+//usage: "\n c byte, no value"
+//usage: "\n b byte data (default)"
+//usage: "\n w word data"
+//usage: "\n i I2C block data"
+//usage: "\n s SMBus block data"
+//usage: "\n Append p for SMBus PEC"
+//usage: "\n"
+//usage: "\n -f force access"
+//usage: "\n -y disable interactive mode"
+//usage: "\n -r read back and compare the result"
+//usage: "\n -m MASK mask specifying which bits to write"
+int i2cset_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
+int i2cset_main(int argc, char **argv)
+{
+ const unsigned opt_f = (1 << 0), opt_y = (1 << 1),
+ opt_m = (1 << 2), opt_r = (1 << 3);
+ const char *const optstr = "fym:r";
+
+ int bus_num, bus_addr, data_addr, mode = I2C_SMBUS_BYTE, pec = 0;
+ int val, blen = 0, mask = 0, fd, status;
+ unsigned char block[I2C_SMBUS_BLOCK_MAX];
+ char *opt_m_arg = NULL;
+ unsigned opts;
+
+ opt_complementary = "-3"; /* from 3 to ? args */
+ opts = getopt32(argv, optstr, &opt_m_arg);
+ argv += optind;
+ argc -= optind;
+
+ bus_num = i2c_bus_lookup(argv[0]);
+ bus_addr = i2c_parse_bus_addr(argv[1]);
+ data_addr = i2c_parse_data_addr(argv[2]);
+
+ if (argv[3]) {
+ if (!argv[4] && argv[3][0] != 'c') {
+ mode = I2C_SMBUS_BYTE_DATA; /* Implicit b */
+ } else {
+ switch (argv[argc-1][0]) {
+ case 'c': /* Already set */ break;
+ case 'b': mode = I2C_SMBUS_BYTE_DATA; break;
+ case 'w': mode = I2C_SMBUS_WORD_DATA; break;
+ case 's': mode = I2C_SMBUS_BLOCK_DATA; break;
+ case 'i': mode = I2C_SMBUS_I2C_BLOCK_DATA; break;
+ default:
+ bb_error_msg("invalid mode");
+ bb_show_usage();
+ }
+
+ pec = argv[argc-1][1] == 'p';
+ if (mode == I2C_SMBUS_BLOCK_DATA ||
+ mode == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (pec && mode == I2C_SMBUS_I2C_BLOCK_DATA)
+ bb_error_msg_and_die(
+ "PEC not supported for I2C "
+ "block writes");
+ if (opts & opt_m)
+ bb_error_msg_and_die(
+ "mask not supported for block "
+ "writes");
+ }
+ }
+ }
+
+ /* Prepare the value(s) to be written according to current mode. */
+ switch (mode) {
+ case I2C_SMBUS_BYTE_DATA:
+ val = xstrtou_range(argv[3], 0, 0, 0xff);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ val = xstrtou_range(argv[3], 0, 0, 0xffff);
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ for (blen = 3; blen < (argc - 1); blen++)
+ block[blen] = xstrtou_range(argv[blen], 0, 0, 0xff);
+ val = -1;
+ break;
+ default:
+ val = -1;
+ break;
+ }
+
+ if (opts & opt_m) {
+ mask = xstrtou_range(opt_m_arg, 0, 0,
+ (mode == I2C_SMBUS_BYTE ||
+ mode == I2C_SMBUS_BYTE_DATA) ? 0xff : 0xffff);
+ }
+
+ fd = i2c_dev_open(bus_num);
+ check_write_funcs(fd, mode, pec);
+ i2c_set_slave_addr(fd, bus_addr, opts & opt_f);
+
+ if (!(opts & opt_y))
+ confirm_action(bus_addr, mode, data_addr, pec);
+
+ /*
+ * If we're using mask - read the current value here and adjust the
+ * value to be written.
+ */
+ if (opts & opt_m) {
+ int tmpval;
+
+ switch (mode) {
+ case I2C_SMBUS_BYTE:
+ tmpval = i2c_smbus_read_byte(fd);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ tmpval = i2c_smbus_read_word_data(fd, data_addr);
+ break;
+ default:
+ tmpval = i2c_smbus_read_byte_data(fd, data_addr);
+ }
+
+ if (tmpval < 0)
+ bb_perror_msg_and_die("can't read old value");
+
+ val = (val & mask) | (tmpval & ~mask);
+
+ if (!(opts & opt_y)) {
+ bb_error_msg("old value 0x%0*x, write mask "
+ "0x%0*x, will write 0x%0*x to register "
+ "0x%02x",
+ mode == I2C_SMBUS_WORD_DATA ? 4 : 2, tmpval,
+ mode == I2C_SMBUS_WORD_DATA ? 4 : 2, mask,
+ mode == I2C_SMBUS_WORD_DATA ? 4 : 2, val,
+ data_addr);
+ confirm_or_abort();
+ }
+ }
+
+ if (pec)
+ i2c_set_pec(fd, 1);
+
+ switch (mode) {
+ case I2C_SMBUS_BYTE:
+ status = i2c_smbus_write_byte(fd, data_addr);
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ status = i2c_smbus_write_word_data(fd, data_addr, val);
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ status = i2c_smbus_write_block_data(fd, data_addr,
+ blen, block);
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ status = i2c_smbus_write_i2c_block_data(fd, data_addr,
+ blen, block);
+ break;
+ default: /* I2C_SMBUS_BYTE_DATA */
+ status = i2c_smbus_write_byte_data(fd, data_addr, val);
+ break;
+ }
+ if (status < 0)
+ bb_perror_msg_and_die("write failed");
+
+ if (pec)
+ i2c_set_pec(fd, 0); /* Clear PEC. */
+
+ /* No readback required - we're done. */
+ if (!(opts & opt_r))
+ return 0;
+
+ switch (mode) {
+ case I2C_SMBUS_BYTE:
+ status = i2c_smbus_read_byte(fd);
+ val = data_addr;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ status = i2c_smbus_read_word_data(fd, data_addr);
+ break;
+ default: /* I2C_SMBUS_BYTE_DATA */
+ status = i2c_smbus_read_byte_data(fd, data_addr);
+ }
+
+ if (status < 0) {
+ printf("Warning - readback failed\n");
+ } else
+ if (status != val) {
+ printf("Warning - data mismatch - wrote "
+ "0x%0*x, read back 0x%0*x\n",
+ mode == I2C_SMBUS_WORD_DATA ? 4 : 2, val,
+ mode == I2C_SMBUS_WORD_DATA ? 4 : 2, status);
+ } else {
+ printf("Value 0x%0*x written, readback matched\n",
+ mode == I2C_SMBUS_WORD_DATA ? 4 : 2, val);
+ }
+
+ return 0;
+}
+#endif /* ENABLE_I2CSET */
+
+#if ENABLE_I2CDUMP
+//usage:#define i2cdump_trivial_usage
+//usage: "[-f] [-r FIRST-LAST] [-y] BUS ADDR [MODE]"
+//usage:#define i2cdump_full_usage "\n\n"
+//usage: "Examine I2C registers\n"
+//usage: "\n I2CBUS i2c bus number"
+//usage: "\n ADDRESS 0x03 - 0x77"
+//usage: "\nMODE is:"
+//usage: "\n b byte (default)"
+//usage: "\n w word"
+//usage: "\n W word on even register addresses"
+//usage: "\n i I2C block"
+//usage: "\n s SMBus block"
+//usage: "\n c consecutive byte"
+//usage: "\n Append p for SMBus PEC"
+//usage: "\n"
+//usage: "\n -f force access"
+//usage: "\n -y disable interactive mode"
+//usage: "\n -r limit the number of registers being accessed"
+int i2cdump_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
+int i2cdump_main(int argc UNUSED_PARAM, char **argv)
+{
+ const unsigned opt_f = (1 << 0), opt_y = (1 << 1),
+ opt_r = (1 << 2);
+ const char *const optstr = "fyr:";
+
+ int bus_num, bus_addr, mode = I2C_SMBUS_BYTE_DATA, even = 0, pec = 0;
+ unsigned first = 0x00, last = 0xff;
+ int fd, i, j, res, blen = 0, tmp;
+ unsigned char cblock[I2C_SMBUS_BLOCK_MAX + I2C_MAX_REGS];
+ unsigned char block[I2C_SMBUS_BLOCK_MAX];
+ char *opt_r_str, *dash;
+ unsigned opts;
+
+ opt_complementary = "-2:?3"; /* from 2 to 3 args */
+ opts = getopt32(argv, optstr, &opt_r_str);
+ argv += optind;
+
+ bus_num = i2c_bus_lookup(argv[0]);
+ bus_addr = i2c_parse_bus_addr(argv[1]);
+
+ if (argv[2]) {
+ switch (argv[2][0]) {
+ case 'b': /* Already set */ break;
+ case 'c': mode = I2C_SMBUS_BYTE; break;
+ case 'w': mode = I2C_SMBUS_WORD_DATA; break;
+ case 'W':
+ mode = I2C_SMBUS_WORD_DATA;
+ even = 1;
+ break;
+ case 's': mode = I2C_SMBUS_BLOCK_DATA; break;
+ case 'i': mode = I2C_SMBUS_I2C_BLOCK_DATA; break;
+ default:
+ bb_error_msg_and_die("invalid mode");
+ }
+
+ if (argv[2][1] == 'p') {
+ if (argv[2][0] == 'W' || argv[2][0] == 'i') {
+ bb_error_msg_and_die(
+ "pec not supported for -W and -i");
+ } else {
+ pec = 1;
+ }
+ }
+ }
+
+ if (opts & opt_r) {
+ first = strtol(opt_r_str, &dash, 0);
+ if (dash == opt_r_str || *dash != '-' || first > 0xff)
+ bb_error_msg_and_die("invalid range");
+ last = xstrtou_range(++dash, 0, first, 0xff);
+
+ /* Range is not available for every mode */
+ switch (mode) {
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ if (!even || (!(first % 2) && last % 2))
+ break;
+ /* Fall through */
+ default:
+ bb_error_msg_and_die(
+ "range not compatible with selected mode");
+ }
+ }
+
+ fd = i2c_dev_open(bus_num);
+ check_read_funcs(fd, mode, -1 /* data_addr */, pec);
+ i2c_set_slave_addr(fd, bus_addr, opts & opt_f);
+
+ if (pec)
+ i2c_set_pec(fd, 1);
+
+ if (!(opts & opt_y))
+ confirm_action(bus_addr, mode, -1 /* data_addr */, pec);
+
+ /* All but word data */
+ if (mode != I2C_SMBUS_WORD_DATA || even) {
+ /*
+ * FIXME This section has been ported from upstream i2cdump.
+ * It has been reworked a bit but is still pretty spaghetti
+ * and needs splitting into several functions.
+ */
+ if (mode == I2C_SMBUS_BLOCK_DATA ||
+ mode == I2C_SMBUS_I2C_BLOCK_DATA) {
+ res = i2c_smbus_read_block_data(fd, 0, cblock);
+ blen = res;
+ } else {
+ for (res = 0; res < I2C_MAX_REGS; res += tmp) {
+ tmp = i2c_smbus_read_i2c_block_data(
+ fd, res, I2C_SMBUS_BLOCK_MAX,
+ cblock + res);
+ if (tmp < 0) {
+ bb_error_msg_and_die(
+ "block read failed");
+ }
+ }
+ if (res >= I2C_MAX_REGS)
+ res = I2C_MAX_REGS;
+ for (i = 0; i < res; i++)
+ block[i] = cblock[i];
+ if (mode != I2C_SMBUS_BLOCK_DATA)
+ for (i = res; i < I2C_MAX_REGS; i++)
+ cblock[i] = -1;
+ }
+
+ if (mode == I2C_SMBUS_BYTE) {
+ res = i2c_smbus_write_byte(fd, first);
+ if (res < 0)
+ bb_perror_msg_and_die(
+ "write start address failed");
+ }
+
+ printf(" 0 1 2 3 4 5 6 7 8 9 a b c d e f"
+ " 0123456789abcdef\n");
+
+ for (i = 0; i < I2C_MAX_REGS; i += 0x10) {
+ if (mode == I2C_SMBUS_BLOCK_DATA && i >= blen)
+ break;
+ if (i/16 < first/16)
+ continue;
+ if (i/16 > last/16)
+ break;
+
+ printf("%02x: ", i);
+ for (j = 0; j < 16; j++) {
+ fflush_all();
+ /* Skip unwanted registers */
+ if (i+j < first || i+j > last) {
+ printf(" ");
+ if (mode == I2C_SMBUS_WORD_DATA) {
+ printf(" ");
+ j++;
+ }
+ continue;
+ }
+
+ switch (mode) {
+ case I2C_SMBUS_BYTE_DATA:
+ res = i2c_smbus_read_byte_data(fd, i+j);
+ block[i+j] = res;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ res = i2c_smbus_read_word_data(fd, i+j);
+ if (res < 0) {
+ block[i+j] = res;
+ block[i+j+1] = res;
+ } else {
+ block[i+j] = res & 0xff;
+ block[i+j+1] = res >> 8;
+ }
+ break;
+ case I2C_SMBUS_BYTE:
+ res = i2c_smbus_read_byte(fd);
+ block[i+j] = res;
+ break;
+ default:
+ res = block[i+j];
+ }
+
+ if (mode == I2C_SMBUS_BLOCK_DATA &&
+ i+j >= blen) {
+ printf(" ");
+ } else if (res < 0) {
+ printf("XX ");
+ if (mode == I2C_SMBUS_WORD_DATA)
+ printf("XX ");
+ } else {
+ printf("%02x ", block[i+j]);
+ if (mode == I2C_SMBUS_WORD_DATA)
+ printf("%02x ", block[i+j+1]);
+ }
+
+ if (mode == I2C_SMBUS_WORD_DATA)
+ j++;
+ }
+ printf(" ");
+
+ for (j = 0; j < 16; j++) {
+ if (mode == I2C_SMBUS_BLOCK_DATA && i+j >= blen)
+ break;
+ /* Skip unwanted registers */
+ if (i+j < first || i+j > last) {
+ printf(" ");
+ continue;
+ }
+
+ res = block[i+j];
+ if (res < 0) {
+//FIXME: impossible, block[] is uchar[]
+ printf("X");
+ } else if (res == 0x00 || res == 0xff) {
+ printf(".");
+ } else if (res < 32 || res >= 127) {
+ printf("?");
+ } else {
+ printf("%c", res);
+ }
+ }
+ printf("\n");
+ }
+ } else {
+ /* Word data. */
+ printf(" 0,8 1,9 2,a 3,b 4,c 5,d 6,e 7,f\n");
+ for (i = 0; i < 256; i += 8) {
+ if (i/8 < first/8)
+ continue;
+ if (i/8 > last/8)
+ break;
+
+ printf("%02x: ", i);
+ for (j = 0; j < 8; j++) {
+ /* Skip unwanted registers. */
+ if (i+j < first || i+j > last) {
+ printf(" ");
+ continue;
+ }
+
+ res = i2c_smbus_read_word_data(fd, i+j);
+ if (res < 0)
+ printf("XXXX ");
+ else
+ printf("%04x ", res & 0xffff);
+ }
+ printf("\n");
+ }
+ }
+
+ return 0;
+}
+#endif /* ENABLE_I2CDUMP */
+
+#if ENABLE_I2CDETECT
+enum adapter_type {
+ ADT_DUMMY = 0,
+ ADT_ISA,
+ ADT_I2C,
+ ADT_SMBUS,
+};
+
+struct adap_desc {
+ const char *funcs;
+ const char *algo;
+};
+
+static const struct adap_desc adap_descs[] = {
+ { .funcs = "dummy",
+ .algo = "Dummy bus", },
+ { .funcs = "isa",
+ .algo = "ISA bus", },
+ { .funcs = "i2c",
+ .algo = "I2C adapter", },
+ { .funcs = "smbus",
+ .algo = "SMBus adapter", },
+};
+
+struct i2c_func
+{
+ long value;
+ const char* name;
+};
+
+static const struct i2c_func i2c_funcs_tab[] = {
+ { .value = I2C_FUNC_I2C,
+ .name = "I2C" },
+ { .value = I2C_FUNC_SMBUS_QUICK,
+ .name = "SMBus Quick Command" },
+ { .value = I2C_FUNC_SMBUS_WRITE_BYTE,
+ .name = "SMBus Send Byte" },
+ { .value = I2C_FUNC_SMBUS_READ_BYTE,
+ .name = "SMBus Receive Byte" },
+ { .value = I2C_FUNC_SMBUS_WRITE_BYTE_DATA,
+ .name = "SMBus Write Byte" },
+ { .value = I2C_FUNC_SMBUS_READ_BYTE_DATA,
+ .name = "SMBus Read Byte" },
+ { .value = I2C_FUNC_SMBUS_WRITE_WORD_DATA,
+ .name = "SMBus Write Word" },
+ { .value = I2C_FUNC_SMBUS_READ_WORD_DATA,
+ .name = "SMBus Read Word" },
+ { .value = I2C_FUNC_SMBUS_PROC_CALL,
+ .name = "SMBus Process Call" },
+ { .value = I2C_FUNC_SMBUS_WRITE_BLOCK_DATA,
+ .name = "SMBus Block Write" },
+ { .value = I2C_FUNC_SMBUS_READ_BLOCK_DATA,
+ .name = "SMBus Block Read" },
+ { .value = I2C_FUNC_SMBUS_BLOCK_PROC_CALL,
+ .name = "SMBus Block Process Call" },
+ { .value = I2C_FUNC_SMBUS_PEC,
+ .name = "SMBus PEC" },
+ { .value = I2C_FUNC_SMBUS_WRITE_I2C_BLOCK,
+ .name = "I2C Block Write" },
+ { .value = I2C_FUNC_SMBUS_READ_I2C_BLOCK,
+ .name = "I2C Block Read" },
+ { .value = 0, .name = NULL }
+};
+
+static enum adapter_type i2cdetect_get_funcs(int bus)
+{
+ enum adapter_type ret;
+ unsigned long funcs;
+ int fd;
+
+ fd = i2c_dev_open(bus);
+
+ get_funcs_matrix(fd, &funcs);
+ if (funcs & I2C_FUNC_I2C)
+ ret = ADT_I2C;
+ else if (funcs & (I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ ret = ADT_SMBUS;
+ else
+ ret = ADT_DUMMY;
+
+ close(fd);
+
+ return ret;
+}
+
+static void NORETURN list_i2c_busses_and_exit(void)
+{
+ const char *const i2cdev_path = "/sys/class/i2c-dev";
+
+ char path[NAME_MAX], name[128];
+ struct dirent *de, *subde;
+ enum adapter_type adt;
+ DIR *dir, *subdir;
+ int rv, bus;
+ char *pos;
+ FILE *fp;
+
+ /*
+ * XXX Upstream i2cdetect also looks for i2c bus info in /proc/bus/i2c,
+ * but we won't bother since it's only useful on older kernels (before
+ * 2.6.5). We expect sysfs to be present and mounted at /sys/.
+ */
+
+ dir = xopendir(i2cdev_path);
+ while ((de = readdir(dir))) {
+ if (de->d_name[0] == '.')
+ continue;
+
+ /* Simple version for ISA chips. */
+ snprintf(path, NAME_MAX, "%s/%s/name",
+ i2cdev_path, de->d_name);
+ fp = fopen(path, "r");
+ if (fp == NULL) {
+ snprintf(path, NAME_MAX,
+ "%s/%s/device/name",
+ i2cdev_path, de->d_name);
+ fp = fopen(path, "r");
+ }
+
+ /* Non-ISA chips require the hard-way. */
+ if (fp == NULL) {
+ snprintf(path, NAME_MAX,
+ "%s/%s/device/name",
+ i2cdev_path, de->d_name);
+ subdir = opendir(path);
+ if (subdir == NULL)
+ continue;
+
+ while ((subde = readdir(subdir))) {
+ if (subde->d_name[0] == '.')
+ continue;
+
+ if (strncmp(subde->d_name, "i2c-", 4) == 0) {
+ snprintf(path, NAME_MAX,
+ "%s/%s/device/%s/name",
+ i2cdev_path, de->d_name,
+ subde->d_name);
+ fp = fopen(path, "r");
+ goto found;
+ }
+ }
+ }
+
+found:
+ if (fp != NULL) {
+ /*
+ * Get the rest of the info and display a line
+ * for a single bus.
+ */
+ memset(name, 0, sizeof(name));
+ pos = fgets(name, sizeof(name), fp);
+ fclose(fp);
+ if (pos == NULL)
+ continue;
+
+ pos = strchr(name, '\n');
+ if (pos != NULL)
+ *pos = '\0';
+
+ rv = sscanf(de->d_name, "i2c-%d", &bus);
+ if (rv != 1)
+ continue;
+
+ if (strncmp(name, "ISA", 3) == 0)
+ adt = ADT_ISA;
+ else
+ adt = i2cdetect_get_funcs(bus);
+
+ printf(
+ "i2c-%d\t%-10s\t%-32s\t%s\n",
+ bus, adap_descs[adt].funcs,
+ name, adap_descs[adt].algo);
+ }
+ }
+
+ exit(EXIT_SUCCESS);
+}
+
+static void NORETURN no_support(const char *cmd)
+{
+ bb_error_msg_and_die("bus doesn't support %s", cmd);
+}
+
+static void will_skip(const char *cmd)
+{
+ bb_error_msg(
+ "warning: can't use %s command, "
+ "will skip some addresses", cmd);
+}
+
+//usage:#define i2cdetect_trivial_usage
+//usage: "[-F I2CBUS] [-l] [-y] [-a] [-q|-r] I2CBUS [FIRST LAST]"
+//usage:#define i2cdetect_full_usage "\n\n"
+//usage: "Detect I2C chips.\n"
+//usage: "\n I2CBUS i2c bus number"
+//usage: "\n FIRST and LAST limit the probing range"
+//usage: "\n"
+//usage: "\n -l output list of installed busses"
+//usage: "\n -y disable interactive mode"
+//usage: "\n -a force scanning of non-regular addresses"
+//usage: "\n -q use smbus quick write commands for probing (default)"
+//usage: "\n -r use smbus read byte commands for probing"
+//usage: "\n -F display list of functionalities"
+int i2cdetect_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
+int i2cdetect_main(int argc UNUSED_PARAM, char **argv)
+{
+ const unsigned opt_y = (1 << 0), opt_a = (1 << 1),
+ opt_q = (1 << 2), opt_r = (1 << 3),
+ opt_F = (1 << 4), opt_l = (1 << 5);
+ const char *const optstr = "yaqrFl";
+
+ int fd, bus_num, i, j, mode = DETECT_MODE_AUTO;
+ int status;
+ unsigned first = 0x00, last = 0x77;
+ unsigned long funcs;
+ unsigned opts;
+
+ opt_complementary = "q--r:r--q:" /* mutually exclusive */
+ "-1:?3"; /* from 1 to 3 args */
+ opts = getopt32(argv, optstr);
+ argv += optind;
+
+ if (opts & opt_l)
+ list_i2c_busses_and_exit();
+
+ bus_num = i2c_bus_lookup(argv[0]);
+ fd = i2c_dev_open(bus_num);
+ get_funcs_matrix(fd, &funcs);
+
+ if (opts & opt_F) {
+ /* Only list the functionalities. */
+ printf("Functionalities implemented by bus #%d\n", bus_num);
+ for (i = 0; i2c_funcs_tab[i].value; i++) {
+ printf("%-32s %s\n", i2c_funcs_tab[i].name,
+ funcs & i2c_funcs_tab[i].value ? "yes" : "no");
+ }
+
+ return EXIT_SUCCESS;
+ }
+
+ if (opts & opt_r)
+ mode = DETECT_MODE_READ;
+ else if (opts & opt_q)
+ mode = DETECT_MODE_QUICK;
+
+ if (opts & opt_a)
+ last = 0x7f;
+
+ /* Read address range. */
+ if (argv[1]) {
+ first = xstrtou_range(argv[1], 16, first, last);
+ if (argv[2])
+ last = xstrtou_range(argv[2], 16, first, last);
+ }
+
+ if (!(funcs & (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_READ_BYTE))) {
+ no_support("detection commands");
+ } else
+ if (mode == DETECT_MODE_QUICK && !(funcs & I2C_FUNC_SMBUS_QUICK)) {
+ no_support("SMBus Quick Write command");
+ } else
+ if (mode == DETECT_MODE_READ && !(funcs & I2C_FUNC_SMBUS_READ_BYTE)) {
+ no_support("SMBus Receive Byte command");
+ } else {
+ if (!(funcs & I2C_FUNC_SMBUS_QUICK))
+ will_skip("SMBus Quick Write");
+ if (!(funcs & I2C_FUNC_SMBUS_READ_BYTE))
+ will_skip("SMBus Receive Byte");
+ }
+
+ if (!(opts & opt_y))
+ confirm_action(-1, -1, -1, 0);
+
+ printf(" 0 1 2 3 4 5 6 7 8 9 a b c d e f\n");
+ for (i = 0; i < 128; i += 16) {
+ printf("%02x: ", i);
+ for(j = 0; j < 16; j++) {
+ fflush_all();
+
+ if (mode == DETECT_MODE_AUTO) {
+ if ((i+j >= 0x30 && i+j <= 0x37) ||
+ (i+j >= 0x50 && i+j <= 0x5F))
+ mode = DETECT_MODE_READ;
+ else
+ mode = DETECT_MODE_QUICK;
+ }
+
+ /* Skip unwanted addresses. */
+ if (i+j < first
+ || i+j > last
+ || (mode == DETECT_MODE_READ && !(funcs & I2C_FUNC_SMBUS_READ_BYTE))
+ || (mode == DETECT_MODE_QUICK && !(funcs & I2C_FUNC_SMBUS_QUICK)))
+ {
+ printf(" ");
+ continue;
+ }
+
+ i2c_set_slave_addr(fd, i + j, 0);
+
+ switch (mode) {
+ case DETECT_MODE_READ:
+ /*
+ * This is known to lock SMBus on various
+ * write-only chips (mainly clock chips).
+ */
+ status = i2c_smbus_read_byte(fd);
+ break;
+ default: /* DETECT_MODE_QUICK: */
+ /*
+ * This is known to corrupt the Atmel
+ * AT24RF08 EEPROM.
+ */
+ status = i2c_smbus_write_quick(fd,
+ I2C_SMBUS_WRITE);
+ break;
+ }
+
+ if (status < 0)
+ printf("-- ");
+ else
+ printf("%02x ", i+j);
+ }
+ printf("\n");
+ }
+
+ return 0;
+}
+#endif /* ENABLE_I2CDETECT */