aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--networking/telnetd.c231
1 files changed, 120 insertions, 111 deletions
diff --git a/networking/telnetd.c b/networking/telnetd.c
index 2fbdc3bb3..68fccdca8 100644
--- a/networking/telnetd.c
+++ b/networking/telnetd.c
@@ -91,107 +91,133 @@ struct globals {
} while (0)
-/*
- Remove all IAC's from buf1 (received IACs are ignored and must be removed
- so as to not be interpreted by the terminal). Make an uninterrupted
- string of characters fit for the terminal. Do this by packing
- all characters meant for the terminal sequentially towards the end of buf.
+/* Write some buf1 data to pty, processing IAC's.
+ * Update wridx1 and size1. Return < 0 on error.
+ * Buggy if IAC is present but incomplete: skips them.
+ */
+static ssize_t
+safe_write_to_pty_decode_iac(struct tsession *ts)
+{
+ unsigned wr;
+ ssize_t rc;
+ unsigned char *buf;
+ unsigned char *found;
+
+ buf = TS_BUF1(ts) + ts->wridx1;
+ wr = MIN(BUFSIZE - ts->wridx1, ts->size1);
+ found = memchr(buf, IAC, wr);
+ if (found != buf) {
+ /* There is a "prefix" of non-IAC chars.
+ * Write only them, and return.
+ */
+ if (found)
+ wr = found - buf;
- Return a pointer to the beginning of the characters meant for the terminal
- and make *num_totty the number of characters that should be sent to
- the terminal.
+ /* We map \r\n ==> \r for pragmatic reasons:
+ * many client implementations send \r\n when
+ * the user hits the CarriageReturn key.
+ * See RFC 1123 3.3.1 Telnet End-of-Line Convention.
+ */
+ rc = wr;
+ found = memchr(buf, '\r', wr);
+ if (found)
+ rc = found - buf + 1;
+ rc = safe_write(ts->ptyfd, buf, rc);
+ if (rc <= 0)
+ return rc;
+ if (rc < wr && (buf[rc] == '\n' || buf[rc] == '\0'))
+ rc++;
- Note - if an IAC (3 byte quantity) starts before (bf + len) but extends
- past (bf + len) then that IAC will be left unprocessed and *processed
- will be less than len.
+ goto update_and_return;
+ }
- CR-LF ->'s CR mapping is also done here, for convenience.
+ /* buf starts with IAC char. Process that sequence.
+ * Example: we get this from our own (bbox) telnet client:
+ * read(5, "\377\374\1""\377\373\37""\377\372\37\0\262\0@\377\360""\377\375\1""\377\375\3") = 21
+ */
+ if (wr <= 1) {
+ /* Only the beginning of the IAC is in the
+ * buffer we were asked to process, we can't
+ * process this char */
+ rc = 1;
+ goto update_and_return;
+ }
- NB: may fail to remove iacs which wrap around buffer!
- */
-static unsigned char *
-remove_iacs(struct tsession *ts, int *pnum_totty)
-{
- unsigned char *ptr0 = TS_BUF1(ts) + ts->wridx1;
- unsigned char *ptr = ptr0;
- unsigned char *totty = ptr;
- unsigned char *end = ptr + MIN(BUFSIZE - ts->wridx1, ts->size1);
- int num_totty;
-
- while (ptr < end) {
- if (*ptr != IAC) {
- char c = *ptr;
-
- *totty++ = c;
- ptr++;
- /* We map \r\n ==> \r for pragmatic reasons.
- * Many client implementations send \r\n when
- * the user hits the CarriageReturn key.
- * See RFC 1123 3.3.1 Telnet End-of-Line Convention.
- */
- if (c == '\r' && ptr < end && (*ptr == '\n' || *ptr == '\0'))
- ptr++;
- continue;
- }
+ if (buf[1] == IAC) { /* Literal IAC (emacs M-DEL) */
+ rc = safe_write(ts->ptyfd, buf, 1);
+ if (rc <= 0)
+ return rc;
+ rc = 2;
+ goto update_and_return;
+ }
- if ((ptr+1) >= end)
- break;
- if (ptr[1] == NOP) { /* Ignore? (putty keepalive, etc.) */
- ptr += 2;
- continue;
- }
- if (ptr[1] == IAC) { /* Literal IAC? (emacs M-DEL) */
- *totty++ = ptr[1];
- ptr += 2;
- continue;
- }
+ if (buf[1] == NOP) { /* NOP. Ignore (putty keepalive, etc) */
+ rc = 2;
+ goto update_and_return;
+ }
- /*
- * TELOPT_NAWS support!
- */
- if ((ptr+2) >= end) {
- /* Only the beginning of the IAC is in the
- buffer we were asked to process, we can't
- process this char */
- break;
- }
- /*
- * IAC -> SB -> TELOPT_NAWS -> 4-byte -> IAC -> SE
- */
- if (ptr[1] == SB && ptr[2] == TELOPT_NAWS) {
- struct winsize ws;
- if ((ptr+8) >= end)
- break; /* incomplete, can't process */
- ws.ws_col = (ptr[3] << 8) | ptr[4];
- ws.ws_row = (ptr[5] << 8) | ptr[6];
- ioctl(ts->ptyfd, TIOCSWINSZ, (char *)&ws);
- ptr += 9;
- continue;
+ if (wr <= 2) {
+ rc = 2;
+ goto update_and_return;
+ }
+
+ /* TELOPT_NAWS support */
+ /* IAC, SB, TELOPT_NAWS, 4-byte, IAC, SE */
+ if (buf[1] == SB && buf[2] == TELOPT_NAWS) {
+ struct winsize ws;
+ if (wr <= 8) {
+ rc = wr; /* incomplete, can't process */
+ goto update_and_return;
}
- /* skip 3-byte IAC non-SB cmd */
+ memset(&ws, 0, sizeof(ws));
+ ws.ws_col = (buf[3] << 8) | buf[4];
+ ws.ws_row = (buf[5] << 8) | buf[6];
+ ioctl(ts->ptyfd, TIOCSWINSZ, (char *)&ws);
+ rc = 9;
+ goto update_and_return;
+ }
+ /* Skip 3-byte IAC non-SB cmds */
#if DEBUG
- fprintf(stderr, "Ignoring IAC %s,%s\n",
- TELCMD(ptr[1]), TELOPT(ptr[2]));
+ fprintf(stderr, "Ignoring IAC %s,%s\n",
+ TELCMD(buf[1]), TELOPT(buf[2]));
#endif
- ptr += 3;
+ rc = 3;
+
+ update_and_return:
+ ts->wridx1 += rc;
+ if (ts->wridx1 >= BUFSIZE) /* actually == BUFSIZE */
+ ts->wridx1 = 0;
+ ts->size1 -= rc;
+ /*
+ * Hack. We cannot process iacs which wrap around buffer's end.
+ * Since properly fixing it requires writing bigger code,
+ * we rely instead on this code making it virtually impossible
+ * to have wrapped iac (people don't type at 2k/second).
+ * It also allows for bigger reads in common case.
+ */
+ if (ts->size1 == 0) { /* very typical */
+ //bb_error_msg("zero size1");
+ ts->rdidx1 = 0;
+ ts->wridx1 = 0;
+ return rc;
}
-
- num_totty = totty - ptr0;
- *pnum_totty = num_totty;
- /* The difference between ptr and totty is number of iacs
- we removed from the stream. Adjust buf1 accordingly */
- if ((ptr - totty) == 0) /* 99.999% of cases */
- return ptr0;
- ts->wridx1 += ptr - totty;
- ts->size1 -= ptr - totty;
- /* Move chars meant for the terminal towards the end of the buffer */
- return memmove(ptr - num_totty, ptr0, num_totty);
+ wr = ts->wridx1;
+ if (wr != 0 && wr < ts->rdidx1) {
+ /* Buffer is not wrapped yet.
+ * We can easily move it to the beginning.
+ */
+ //bb_error_msg("moved %d", wr);
+ memmove(TS_BUF1(ts), TS_BUF1(ts) + wr, ts->size1);
+ ts->rdidx1 -= wr;
+ ts->wridx1 = 0;
+ }
+ return rc;
}
/*
* Converting single IAC into double on output
*/
-static size_t iac_safe_write(int fd, const char *buf, size_t count)
+static size_t safe_write_double_iac(int fd, const char *buf, size_t count)
{
const char *IACptr;
size_t wr, rc, total;
@@ -298,7 +324,7 @@ make_new_session(
IAC, WILL, TELOPT_ECHO,
IAC, WILL, TELOPT_SGA
};
- /* This confuses iac_safe_write(), it will try to duplicate
+ /* This confuses safe_write_double_iac(), it will try to duplicate
* each IAC... */
//memcpy(TS_BUF2(ts), iacs_to_send, sizeof(iacs_to_send));
//ts->rdidx2 = sizeof(iacs_to_send);
@@ -649,51 +675,34 @@ int telnetd_main(int argc UNUSED_PARAM, char **argv)
struct tsession *next = ts->next; /* in case we free ts */
if (/*ts->size1 &&*/ FD_ISSET(ts->ptyfd, &wrfdset)) {
- int num_totty;
- unsigned char *ptr;
/* Write to pty from buffer 1 */
- ptr = remove_iacs(ts, &num_totty);
- count = safe_write(ts->ptyfd, ptr, num_totty);
+ count = safe_write_to_pty_decode_iac(ts);
if (count < 0) {
if (errno == EAGAIN)
goto skip1;
goto kill_session;
}
- ts->size1 -= count;
- ts->wridx1 += count;
- if (ts->wridx1 >= BUFSIZE) /* actually == BUFSIZE */
- ts->wridx1 = 0;
}
skip1:
if (/*ts->size2 &&*/ FD_ISSET(ts->sockfd_write, &wrfdset)) {
/* Write to socket from buffer 2 */
count = MIN(BUFSIZE - ts->wridx2, ts->size2);
- count = iac_safe_write(ts->sockfd_write, (void*)(TS_BUF2(ts) + ts->wridx2), count);
+ count = safe_write_double_iac(ts->sockfd_write, (void*)(TS_BUF2(ts) + ts->wridx2), count);
if (count < 0) {
if (errno == EAGAIN)
goto skip2;
goto kill_session;
}
- ts->size2 -= count;
ts->wridx2 += count;
if (ts->wridx2 >= BUFSIZE) /* actually == BUFSIZE */
ts->wridx2 = 0;
+ ts->size2 -= count;
+ if (ts->size2 == 0) {
+ ts->rdidx2 = 0;
+ ts->wridx2 = 0;
+ }
}
skip2:
- /* Should not be needed, but... remove_iacs is actually buggy
- * (it cannot process iacs which wrap around buffer's end)!
- * Since properly fixing it requires writing bigger code,
- * we rely instead on this code making it virtually impossible
- * to have wrapped iac (people don't type at 2k/second).
- * It also allows for bigger reads in common case. */
- if (ts->size1 == 0) {
- ts->rdidx1 = 0;
- ts->wridx1 = 0;
- }
- if (ts->size2 == 0) {
- ts->rdidx2 = 0;
- ts->wridx2 = 0;
- }
if (/*ts->size1 < BUFSIZE &&*/ FD_ISSET(ts->sockfd_read, &rdfdset)) {
/* Read from socket to buffer 1 */