aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/applets.src.h2
-rw-r--r--networking/Config.src105
-rw-r--r--networking/Kbuild.src1
-rw-r--r--networking/ifupdown.c135
4 files changed, 127 insertions, 116 deletions
diff --git a/include/applets.src.h b/include/applets.src.h
index f2c754b74..36e1f0266 100644
--- a/include/applets.src.h
+++ b/include/applets.src.h
@@ -160,10 +160,8 @@ IF_HEXDUMP(APPLET_NOEXEC(hexdump, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hexdump
IF_HTTPD(APPLET(httpd, BB_DIR_USR_SBIN, BB_SUID_DROP))
IF_HWCLOCK(APPLET(hwclock, BB_DIR_SBIN, BB_SUID_DROP))
IF_IFCONFIG(APPLET(ifconfig, BB_DIR_SBIN, BB_SUID_DROP))
-IF_IFUPDOWN(APPLET_ODDNAME(ifdown, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifdown))
IF_IFENSLAVE(APPLET(ifenslave, BB_DIR_SBIN, BB_SUID_DROP))
IF_IFPLUGD(APPLET(ifplugd, BB_DIR_USR_SBIN, BB_SUID_DROP))
-IF_IFUPDOWN(APPLET_ODDNAME(ifup, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifup))
IF_INETD(APPLET(inetd, BB_DIR_USR_SBIN, BB_SUID_DROP))
IF_INOTIFYD(APPLET(inotifyd, BB_DIR_SBIN, BB_SUID_DROP))
IF_INSTALL(APPLET(install, BB_DIR_USR_BIN, BB_SUID_DROP))
diff --git a/networking/Config.src b/networking/Config.src
index 398a5ee25..43667fe6a 100644
--- a/networking/Config.src
+++ b/networking/Config.src
@@ -342,111 +342,6 @@ config IFPLUGD
help
Network interface plug detection daemon.
-config IFUPDOWN
- bool "ifupdown"
- default y
- help
- Activate or deactivate the specified interfaces. This applet makes
- use of either "ifconfig" and "route" or the "ip" command to actually
- configure network interfaces. Therefore, you will probably also want
- to enable either IFCONFIG and ROUTE, or enable
- FEATURE_IFUPDOWN_IP and the various IP options. Of
- course you could use non-busybox versions of these programs, so
- against my better judgement (since this will surely result in plenty
- of support questions on the mailing list), I do not force you to
- enable these additional options. It is up to you to supply either
- "ifconfig", "route" and "run-parts" or the "ip" command, either
- via busybox or via standalone utilities.
-
-config IFUPDOWN_IFSTATE_PATH
- string "Absolute path to ifstate file"
- default "/var/run/ifstate"
- depends on IFUPDOWN
- help
- ifupdown keeps state information in a file called ifstate.
- Typically it is located in /var/run/ifstate, however
- some distributions tend to put it in other places
- (debian, for example, uses /etc/network/run/ifstate).
- This config option defines location of ifstate.
-
-config FEATURE_IFUPDOWN_IP
- bool "Use ip applet"
- default y
- depends on IFUPDOWN
- help
- Use the iproute "ip" command to implement "ifup" and "ifdown", rather
- than the default of using the older 'ifconfig' and 'route' utilities.
-
-config FEATURE_IFUPDOWN_IP_BUILTIN
- bool "Use busybox ip applet"
- default y
- depends on FEATURE_IFUPDOWN_IP
- select PLATFORM_LINUX
- select IP
- select FEATURE_IP_ADDRESS
- select FEATURE_IP_LINK
- select FEATURE_IP_ROUTE
- help
- Use the busybox iproute "ip" applet to implement "ifupdown".
-
- If left disabled, you must install the full-blown iproute2
- utility or the "ifup" and "ifdown" applets will not work.
-
-config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
- bool "Use busybox ifconfig and route applets"
- default n
- depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP
- select IFCONFIG
- select ROUTE
- help
- Use the busybox iproute "ifconfig" and "route" applets to
- implement the "ifup" and "ifdown" utilities.
-
- If left disabled, you must install the full-blown ifconfig
- and route utilities, or the "ifup" and "ifdown" applets will not
- work.
-
-config FEATURE_IFUPDOWN_IPV4
- bool "Support for IPv4"
- default y
- depends on IFUPDOWN
- help
- If you want ifup/ifdown to talk IPv4, leave this on.
-
-config FEATURE_IFUPDOWN_IPV6
- bool "Support for IPv6"
- default y
- depends on IFUPDOWN && FEATURE_IPV6
- help
- If you need support for IPv6, turn this option on.
-
-### UNUSED
-###config FEATURE_IFUPDOWN_IPX
-### bool "Support for IPX"
-### default y
-### depends on IFUPDOWN
-### help
-### If this option is selected you can use busybox to work with IPX
-### networks.
-
-config FEATURE_IFUPDOWN_MAPPING
- bool "Enable mapping support"
- default y
- depends on IFUPDOWN
- help
- This enables support for the "mapping" stanza, unless you have
- a weird network setup you don't need it.
-
-config FEATURE_IFUPDOWN_EXTERNAL_DHCP
- bool "Support for external dhcp clients"
- default n
- depends on IFUPDOWN
- help
- This enables support for the external dhcp clients. Clients are
- tried in the following order: dhcpcd, dhclient, pump and udhcpc.
- Otherwise, if udhcpc applet is enabled, it is used.
- Otherwise, ifup/ifdown will have no support for DHCP.
-
config INETD
bool "inetd"
default y
diff --git a/networking/Kbuild.src b/networking/Kbuild.src
index e14070647..4ad750283 100644
--- a/networking/Kbuild.src
+++ b/networking/Kbuild.src
@@ -20,7 +20,6 @@ lib-$(CONFIG_HTTPD) += httpd.o
lib-$(CONFIG_IFCONFIG) += ifconfig.o interface.o
lib-$(CONFIG_IFENSLAVE) += ifenslave.o interface.o
lib-$(CONFIG_IFPLUGD) += ifplugd.o
-lib-$(CONFIG_IFUPDOWN) += ifupdown.o
lib-$(CONFIG_INETD) += inetd.o
lib-$(CONFIG_IP) += ip.o
lib-$(CONFIG_IPCALC) += ipcalc.o
diff --git a/networking/ifupdown.c b/networking/ifupdown.c
index 1d0fc53cf..7ac517afd 100644
--- a/networking/ifupdown.c
+++ b/networking/ifupdown.c
@@ -1,6 +1,6 @@
/* vi: set sw=4 ts=4: */
/*
- * ifupdown for busybox
+ * ifup/ifdown for busybox
* Copyright (c) 2002 Glenn McGrath
* Copyright (c) 2003-2004 Erik Andersen <andersen@codepoet.org>
*
@@ -17,10 +17,127 @@
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
+//config:config IFUP
+//config: bool "ifup"
+//config: default y
+//config: help
+//config: Activate the specified interfaces. This applet makes use
+//config: of either "ifconfig" and "route" or the "ip" command to actually
+//config: configure network interfaces. Therefore, you will probably also want
+//config: to enable either IFCONFIG and ROUTE, or enable
+//config: FEATURE_IFUPDOWN_IP and the various IP options. Of
+//config: course you could use non-busybox versions of these programs, so
+//config: against my better judgement (since this will surely result in plenty
+//config: of support questions on the mailing list), I do not force you to
+//config: enable these additional options. It is up to you to supply either
+//config: "ifconfig", "route" and "run-parts" or the "ip" command, either
+//config: via busybox or via standalone utilities.
+//config:
+//config:config IFDOWN
+//config: bool "ifdown"
+//config: default y
+//config: help
+//config: Deactivate the specified interfaces.
+//config:
+//config:config IFUPDOWN_IFSTATE_PATH
+//config: string "Absolute path to ifstate file"
+//config: default "/var/run/ifstate"
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: ifupdown keeps state information in a file called ifstate.
+//config: Typically it is located in /var/run/ifstate, however
+//config: some distributions tend to put it in other places
+//config: (debian, for example, uses /etc/network/run/ifstate).
+//config: This config option defines location of ifstate.
+//config:
+//config:config FEATURE_IFUPDOWN_IP
+//config: bool "Use ip applet"
+//config: default y
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: Use the iproute "ip" command to implement "ifup" and "ifdown", rather
+//config: than the default of using the older 'ifconfig' and 'route' utilities.
+//config:
+//config:config FEATURE_IFUPDOWN_IP_BUILTIN
+//config: bool "Use busybox ip applet"
+//config: default y
+//config: depends on FEATURE_IFUPDOWN_IP
+//config: select PLATFORM_LINUX
+//config: select IP
+//config: select FEATURE_IP_ADDRESS
+//config: select FEATURE_IP_LINK
+//config: select FEATURE_IP_ROUTE
+//config: help
+//config: Use the busybox iproute "ip" applet to implement "ifupdown".
+//config:
+//config: If left disabled, you must install the full-blown iproute2
+//config: utility or the "ifup" and "ifdown" applets will not work.
+//config:
+//config:config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
+//config: bool "Use busybox ifconfig and route applets"
+//config: default n
+//config: depends on (IFUP || IFDOWN) && !FEATURE_IFUPDOWN_IP
+//config: select IFCONFIG
+//config: select ROUTE
+//config: help
+//config: Use the busybox iproute "ifconfig" and "route" applets to
+//config: implement the "ifup" and "ifdown" utilities.
+//config:
+//config: If left disabled, you must install the full-blown ifconfig
+//config: and route utilities, or the "ifup" and "ifdown" applets will not
+//config: work.
+//config:
+//config:config FEATURE_IFUPDOWN_IPV4
+//config: bool "Support for IPv4"
+//config: default y
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: If you want ifup/ifdown to talk IPv4, leave this on.
+//config:
+//config:config FEATURE_IFUPDOWN_IPV6
+//config: bool "Support for IPv6"
+//config: default y
+//config: depends on (IFUP || IFDOWN) && FEATURE_IPV6
+//config: help
+//config: If you need support for IPv6, turn this option on.
+//config:
+//UNUSED:
+////////:config FEATURE_IFUPDOWN_IPX
+////////: bool "Support for IPX"
+////////: default y
+////////: depends on IFUP || IFDOWN
+////////: help
+////////: If this option is selected you can use busybox to work with IPX
+////////: networks.
+//config:
+//config:config FEATURE_IFUPDOWN_MAPPING
+//config: bool "Enable mapping support"
+//config: default y
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: This enables support for the "mapping" stanza, unless you have
+//config: a weird network setup you don't need it.
+//config:
+//config:config FEATURE_IFUPDOWN_EXTERNAL_DHCP
+//config: bool "Support for external dhcp clients"
+//config: default n
+//config: depends on IFUP || IFDOWN
+//config: help
+//config: This enables support for the external dhcp clients. Clients are
+//config: tried in the following order: dhcpcd, dhclient, pump and udhcpc.
+//config: Otherwise, if udhcpc applet is enabled, it is used.
+//config: Otherwise, ifup/ifdown will have no support for DHCP.
+
+//applet:IF_IFUP(APPLET_ODDNAME(ifup, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifup))
+//applet:IF_IFDOWN(APPLET_ODDNAME(ifdown, ifupdown, BB_DIR_SBIN, BB_SUID_DROP, ifdown))
+
+//kbuild:lib-$(CONFIG_IFUP) += ifupdown.o
+//kbuild:lib-$(CONFIG_IFDOWN) += ifupdown.o
+
//usage:#define ifup_trivial_usage
//usage: "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
//usage:#define ifup_full_usage "\n\n"
-//usage: " -a De/configure all interfaces automatically"
+//usage: " -a Configure all interfaces"
//usage: "\n -i FILE Use FILE instead of /etc/network/interfaces"
//usage: "\n -n Print out what would happen, but don't do it"
//usage: IF_FEATURE_IFUPDOWN_MAPPING(
@@ -28,12 +145,12 @@
//usage: "\n -m Don't run any mappings"
//usage: )
//usage: "\n -v Print out what would happen before doing it"
-//usage: "\n -f Force de/configuration"
+//usage: "\n -f Force configuration"
//usage:
//usage:#define ifdown_trivial_usage
//usage: "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
//usage:#define ifdown_full_usage "\n\n"
-//usage: " -a De/configure all interfaces automatically"
+//usage: " -a Deconfigure all interfaces"
//usage: "\n -i FILE Use FILE for interface definitions"
//usage: "\n -n Print out what would happen, but don't do it"
//usage: IF_FEATURE_IFUPDOWN_MAPPING(
@@ -41,7 +158,7 @@
//usage: "\n -m Don't run any mappings"
//usage: )
//usage: "\n -v Print out what would happen before doing it"
-//usage: "\n -f Force de/configuration"
+//usage: "\n -f Force deconfiguration"
#include "libbb.h"
#include "common_bufsiz.h"
@@ -1248,7 +1365,6 @@ static FILE *open_new_state_file(void)
return xfdopen_for_write(fd);
}
-
int ifupdown_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int ifupdown_main(int argc UNUSED_PARAM, char **argv)
{
@@ -1263,10 +1379,13 @@ int ifupdown_main(int argc UNUSED_PARAM, char **argv)
G.startup_PATH = getenv("PATH");
G.shell = xstrdup(get_shell_name());
- cmds = iface_down;
- if (applet_name[2] == 'u') {
+ if (ENABLE_IFUP
+ && (!ENABLE_IFDOWN || applet_name[2] == 'u')
+ ) {
/* ifup command */
cmds = iface_up;
+ } else {
+ cmds = iface_down;
}
getopt32(argv, OPTION_STR, &interfaces);