aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--networking/telnetd.c17
-rw-r--r--networking/telnetd.ctrlSQ.patch175
2 files changed, 184 insertions, 8 deletions
diff --git a/networking/telnetd.c b/networking/telnetd.c
index 481c932db..59d609bc8 100644
--- a/networking/telnetd.c
+++ b/networking/telnetd.c
@@ -35,8 +35,8 @@
/* Structure that describes a session */
struct tsession {
struct tsession *next;
+ pid_t shell_pid;
int sockfd_read, sockfd_write, ptyfd;
- int shell_pid;
/* two circular buffers */
/*char *buf1, *buf2;*/
@@ -247,7 +247,8 @@ make_new_session(
static const char iacs_to_send[] ALIGN1 = {
IAC, DO, TELOPT_ECHO,
IAC, DO, TELOPT_NAWS,
- IAC, DO, TELOPT_LFLOW,
+ /* This requires telnetd.ctrlSQ.patch (incomplete) */
+ /* IAC, DO, TELOPT_LFLOW, */
IAC, WILL, TELOPT_ECHO,
IAC, WILL, TELOPT_SGA
};
@@ -284,13 +285,13 @@ make_new_session(
/* Child */
/* Careful - we are after vfork! */
- /* make new session and process group */
- setsid();
-
- /* Restore default signal handling */
+ /* Restore default signal handling ASAP */
bb_signals((1 << SIGCHLD) + (1 << SIGPIPE), SIG_DFL);
- /* open the child's side of the tty. */
+ /* Make new session and process group */
+ setsid();
+
+ /* Open the child's side of the tty. */
/* NB: setsid() disconnects from any previous ctty's. Therefore
* we must open child's side of the tty AFTER setsid! */
close(0);
@@ -360,7 +361,7 @@ free_session(struct tsession *ts)
* doesn't send SIGKILL. When we close ptyfd,
* kernel sends SIGHUP to processes having slave side opened. */
kill(ts->shell_pid, SIGKILL);
- wait4(ts->shell_pid, NULL, 0, NULL);
+ waitpid(ts->shell_pid, NULL, 0);
#endif
close(ts->ptyfd);
close(ts->sockfd_read);
diff --git a/networking/telnetd.ctrlSQ.patch b/networking/telnetd.ctrlSQ.patch
new file mode 100644
index 000000000..885e10523
--- /dev/null
+++ b/networking/telnetd.ctrlSQ.patch
@@ -0,0 +1,175 @@
+From: "Doug Graham" <dgraham@nortel.com>
+Date: 2009-01-22 07:20
+
+Hello,
+
+Busybox's telnetd does not disable local (client-side) flow control
+properly. It does not put the pty into packet mode and then notify the
+client whenever flow control is disabled by an application running under
+its control. The result is that ^S/^Q are not passed through to the
+application, which is painful when the application is an emacs variant.
+
+I suppose that support for this might be considered bloat, but the
+included patch only adds about 200 bytes of text to x86 busybox and 300
+bytes to mipsel busybox. Please consider applying.
+
+=============================
+
+NB: the patch doesn't work as-is because we now have iac_safe_write()
+which quotes IACs on output.
+
+=============================
+Docs:
+
+The following ioctl(2) calls apply only to pseudo terminals:
+
+TIOCSTOP Stops output to a terminal (e.g. like typing ^S). Takes no parameter.
+
+TIOCSTART Restarts output (stopped by TIOCSTOP or by typing ^S). Takes no parameter.
+
+TIOCPKT Enable/disable packet mode. When applied to the master side of a pseudo terminal, each
+subsequent read(2) from the terminal will return data written on the slave part of the pseudo terminal preceded by a
+zero byte (symbolically defined as TIOCPKT_DATA), or a single byte reflecting control status information.
+In the latter case, the byte is an inclusive-or of zero or more of the bits:
+
+TIOCPKT_FLUSHREAD whenever the read queue for the terminal is flushed.
+TIOCPKT_FLUSHWRITE whenever the write queue for the terminal is flushed.
+TIOCPKT_STOP whenever output to the terminal is stopped a la ^S.
+TIOCPKT_START whenever output to the terminal is restarted.
+TIOCPKT_DOSTOP whenever t_stopc is ^S and t_startc is ^Q.
+TIOCPKT_NOSTOP whenever the start and stop characters are not ^S/^Q.
+
+While this mode is in use, the presence of control status information to be read from the master side may be detected
+by a select(2) for exceptional conditions.
+
+This mode is used by rlogin(1) and rlogind(8) to implement a remote-echoed, locally ^S/^Q flow-controlled remote login
+with proper back-flushing of output; it can be used by other similar programs.
+
+TIOCUCNTL Enable/disable a mode that allows a small number of simple user ioctl(2) commands to be passed through
+the pseudo-terminal, using a protocol similar to that of TIOCPKT. The TIOCUCNTL and TIOCPKT modes are mutually
+exclusive. This mode is enabled from the master side of a pseudo terminal. Each subsequent read(2) from the master side
+will return data written on the slave part of the pseudo terminal preceded by a zero byte, or a single byte reflecting a
+user control operation on the slave side. A user control command consists of a special ioctl(2) operation with no data;
+the command is given as UIOCCMD (n), where n is a number in the range 1-255. The operation value n will be received as
+a single byte on the next read(2) from the master side. The ioctl(2) UIOCCMD (0) is a no-op that may be used to probe
+for the existence of this facility. As with TIOCPKT mode, command operations may be detected with a select(2) for
+exceptional conditions.
+
+--- busybox-1.13.2/networking/telnetd.c 2009/01/21 20:02:39 1.1
++++ busybox-1.13.2/networking/telnetd.c 2009/01/22 00:35:28
+@@ -38,6 +38,9 @@
+ int sockfd_read, sockfd_write, ptyfd;
+ int shell_pid;
+
++#ifdef TIOCPKT
++ int flowstate;
++#endif
+ /* two circular buffers */
+ /*char *buf1, *buf2;*/
+ /*#define TS_BUF1 ts->buf1*/
+@@ -170,6 +173,9 @@
+ int fd, pid;
+ char tty_name[GETPTY_BUFSIZE];
+ struct tsession *ts = xzalloc(sizeof(struct tsession) + BUFSIZE * 2);
++#ifdef TIOCPKT
++ int on = 1;
++#endif
+
+ /*ts->buf1 = (char *)(ts + 1);*/
+ /*ts->buf2 = ts->buf1 + BUFSIZE;*/
+@@ -180,6 +186,10 @@
+ maxfd = fd;
+ ts->ptyfd = fd;
+ ndelay_on(fd);
++#ifdef TIOCPKT
++ ioctl(fd, TIOCPKT, &on);
++ ts->flowstate = TIOCPKT_DOSTOP;
++#endif
+ #if ENABLE_FEATURE_TELNETD_STANDALONE
+ ts->sockfd_read = sock;
+ /* SO_KEEPALIVE by popular demand */
+@@ -385,6 +395,16 @@
+ portnbr = 23,
+ };
+ #endif
++#ifdef TIOCPKT
++ int control;
++ static const char lflow_on[] =
++ {IAC, SB, TELOPT_LFLOW, LFLOW_ON, IAC, SE};
++ static const char lflow_off[] =
++ {IAC, SB, TELOPT_LFLOW, LFLOW_OFF, IAC, SE};
++# define RESERVED sizeof(lflow_on)
++#else
++# define RESERVED 0
++#endif
+ /* Even if !STANDALONE, we accept (and ignore) -i, thus people
+ * don't need to guess whether it's ok to pass -i to us */
+ opt = getopt32(argv, "f:l:Ki" USE_FEATURE_TELNETD_STANDALONE("p:b:F"),
+@@ -475,7 +495,7 @@
+ FD_SET(ts->sockfd_read, &rdfdset);
+ if (ts->size2 > 0) /* can write to socket */
+ FD_SET(ts->sockfd_write, &wrfdset);
+- if (ts->size2 < BUFSIZE) /* can read from pty */
++ if (ts->size2 < (BUFSIZE - RESERVED)) /* can read from pty */
+ FD_SET(ts->ptyfd, &rdfdset);
+ }
+ ts = next;
+@@ -593,6 +613,52 @@
+ goto skip4;
+ goto kill_session;
+ }
++#ifdef TIOCPKT
++ control = TS_BUF2[ts->rdidx2];
++ if (--count > 0 && control == TIOCPKT_DATA) {
++ /*
++ * If we are in packet mode, and we have
++ * just read a chunk of actual data from
++ * the pty, then there is the TIOCPKT_DATA
++ * byte (zero) that we have got to remove
++ * somehow. If there were no chars in
++ * TS_BUF2 before we did this read, then
++ * we can optimize by just advancing wridx2.
++ * Otherwise we have to copy the new data down
++ * to close the gap (Could use readv() instead).
++ */
++ if (ts->size2 == 0)
++ ts->wridx2++;
++ else {
++ memmove(TS_BUF2 + ts->rdidx2,
++ TS_BUF2 + ts->rdidx2 + 1, count);
++ }
++ }
++
++ /*
++ * If the flow control state changed, notify
++ * the client. If "control" is not TIOCPKT_DATA,
++ * then there are no data bytes to worry about.
++ */
++ if ((control & (TIOCPKT_DOSTOP|TIOCPKT_NOSTOP)) != 0
++ && ts->flowstate != (control & TIOCPKT_DOSTOP)) {
++ const char *p = ts->flowstate ? lflow_off : lflow_on;
++
++ /*
++ * We know we have enough free slots available
++ * (see RESERVED) but they are not necessarily
++ * contiguous; we may have to wrap.
++ */
++ for (count = sizeof(lflow_on); count > 0; count--) {
++ TS_BUF2[ts->rdidx2++] = *p++;
++ if (ts->rdidx2 >= BUFSIZE)
++ ts->rdidx2 = 0;
++ ts->size2++;
++ }
++
++ ts->flowstate = control & TIOCPKT_DOSTOP;
++ }
++#endif /* TIOCPKT */
+ ts->size2 += count;
+ ts->rdidx2 += count;
+ if (ts->rdidx2 >= BUFSIZE) /* actually == BUFSIZE */
+
+--Doug
+_______________________________________________
+busybox mailing list
+busybox@busybox.net
+http://lists.busybox.net/mailman/listinfo/busybox